Discontinued Vaporblunt 2.0 & VB 2.0 DLX

zourdiesel said:

^ i had contacted thermovape and they said to mail the core to them, just never got around to it.

Click to expand...

I understand this, but think I can suggest an easy test for you to confirm the core is defective so you'll know what to expect from the sending it in part.

But we're on the wrong thread to be going into it.

If you'd like to pursue this (and get your T1 going) post the problem on one of the TV threads and we'll pick it up again there?

OF

At first I felt like I pulled the trigger too soon and I was upset. Once I learned the technique to this device, no more issues. Stickstones & OF's descriptions that they have mentioned in the latter part of this thread nails it. I blow good size vape clouds too. I'm not blowing clouds like the chick in the video when she was using the WT and I can't come close to reproducing it with my WT. IMO the video seems misleading, but I will use the WT with another device some day. VB 2.0 even lets me know when to clean it by the way its hitting. This device is a breeze to clean, slight learning curve on tokeage, and it medicates very well even when there isn't any expel of vapor, for a conduction vape.

So i went out this week (tax time) in search of a vaporizer. I have never vaped before but a smoker of almost 10 yrs. I didn't want to spend over $200 not knowing how expensive they can be. So I researched a little bit and found the one I wanted. the Vapir One. Looked good because it does whips and bags. But to my dismay the local smoke shop did not have it as i think it is an older model. Well long story short the guy in the shop talked me into the VB 2.0 ." It does oils too! " is where he got me . Not that have concentrate that much but when I do i need a device.

That was three days ago. When I first got home with it I was extremely disappointed. I guess after smoking it for so many years I had actually grown fond of that taste and the body to the smoke. I felt kind of cheated. By the time I was done I had realized that I was medicated. I have used it about a dozen times and each time seems to get better. I have only been able to read a few pages if this thread but it has already shown me how to pull bigger vapes.

So I went to the same smoke shop a few hours ago. Had to get me the WT. He couldn't have given the WT to me for free the first time, But i really didn't understand the device. I got a second hand "Shower Head" WT that was used for $80. I only got to smoke 2 packs out of that son of a bitch before I broke the whole bottom off. The tube got stuck on the vaporblunt , I pulled, and evidently it was really a SECOND HAND piece, when i was pulling the black adapter piece off i knocked it against my dresser and the whole bottom broke on the WT .damn I've never had a piece of glass break so easy.
https://www.dropbox.com/s/s575oauppeu9ldz/IMG_20130228_225510_325.jpg

I swear that attachment was AWESOME! It totally changed my outlook on the whole device. The vape was about the same thickness but the sensation of the water percolating , made it seem more like smoking it, which i enjoyed thoroughly. So needless to say i will be returning to the smoke shop tomorrow and try and see if the guy will hit me a deal since i've spent $300 in his shop in the last few days. He sold me the 2.0 for $200. and the used WT for 100. He wants $180 for the new ones.We will See if we can't meet somewhere in the middle. I sure hope so...

This thread is absolutely awesome and full of great information in the few pages i have seen. I was thinking about taking my product back but since ive found this thread it has encouraged me to keep my device and go buy the H20 Attachment (broken) . So im gonna go back to reading this thread thoroughly over . And vape a few more. Thanks to TheRealVaporBlunt for your awesome product! I saw your new smaller device the Pinnacle at the store today! he said they just got it 4 days ago.

Edit* I Will do a more extensive review in the future, but for now this thing is pretty bad ass!

Howdy Matt, good to meet you, welcome to the Forum! Great story ('cept for the broken glass part....), thanks for sharing it.

Off hand I'd say you done broke the code all right, it's a fine product once you meet it on it's terms not yours. If you think back to your first experience with THC it was mild too, right? Many/most don't really get of the first time, the buzz can get killed as it happens (or fails to develop) as I see it.

And of course we all bring our personal set of expectations to the party. This can (and IMO usually does) get in the way. Like many other things in life you have to get past those expectations to get past those expectations. Sadly, I think too many don't. They don't get the results they expect the first time or two, cop an 'oh, yeah, that stuff' attitude and go back to blazing and feeling superior.

Not to worry, us vapers will outlive them, date their women, play with their stuff.....all that.

Anyway, glad you got on board. Good luck running down some more glass and enjoy your vape.....that's what you paid your money for, after all. BTW I think it's way cool you spent your tax money on vapes, if you gave it to those clowns in DC you know what they'd have wasted it on.....

OF

welcome to the forum, mattkilla...glad you got it up and running. Unless you're blowing bags of vapor, I think any newbie to vapor would have a real hard time getting good hits off any vape the first time (my first time was a nightmare with the Extreme). It's good to see the vapor newbies getting this vape and having victories after a couple of uses.

So that was the white stringy material and the loose chamber. I figured a vid would be better then pics. I don't remember the chamber being loose like that in the beginning. What do I do, can I still use it like that, do I send it in? Help

watsup matt killer! I am also the proud new owner of a vb2 too...im learning more and more how to use it with each session...just did a wake n bake with some alien og and sprinkled some of that friction hash that gets stuck in my grinder...makes getting for work much more fun

Herbal Ant said:

So that was the white stringy material and the loose chamber. I figured a vid would be better then pics. I don't remember the chamber being loose like that in the beginning. What do I do, can I still use it like that, do I send it in? Help

Click to expand...

I got your pm, but the video wouldn't play. I would suggest you call our customer service today and speak to them. Tell them I said we would service it even though you didn't purchase from us. That should solve your problem

i'll start by saying hey to everyone, this is my first post on the site. The last couple weeks i've been educating myself on what i wanted to purchase for my first vape. i recently tried a friend of mines arizer solo and was blown away, the only other vaporizer i've tried was a volcano classic a couple years back. i like how the arizer solo was small and actually made thick vapour clouds. so by looking around i was stuck between the solo and the vb2.0. i purchased the vb2.0 and been using it for a couple of days now. my first sesh was somewhat dissapointing i failed to get thick clouds, in fact they were barely visible. the high i got made up for it. i've been puffing for a while and its definitely a different buzz. but on my second sesh i read to pack the bowl full, i did just that and actually packed it "snug" id say, and wow. don't get me wrong the clouds arent quite as thick as the solo's but still very visible, and produce a great high, i've been using it on the third setting. i'm actually very pleased with my purchase and prefer it over the solo because because it more portable and the high is the same regardless of the vapour thickness. i haven't had a chance to try the oil attachment but the was another reason i chose the vb, i'll be anxious to get my hands on the budder and try it out. one thing i'm still not sure of is, in a video i saw the guy loads it then starts the heating process. i've been doing that with good results, but are you supposed to wait till it reaches its temperature before loading the herbs? anyway i hope this helped if anyone was looking to purchase one, i would recommend for sure

TherealVaporblunt said:

I got your pm, but the video wouldn't play. I would suggest you call our customer service today and speak to them. Tell them I said we would service it even though you didn't purchase from us. That should solve your problem

Click to expand...

TVRB, you guys rock on everything you do!

D33z said:

TVRB, you guys rock on everything you do!

Click to expand...

I really appreciate that.

Getting my VB2 tomorrow!

What does everyone think of the water tool for VB2? I am trying to decide if I should buy a DLX Shower Kit for about $160 or buy the Pong Tapered adapter (vaporblunt website) and find a water tool off of a website like grasscity (Total of about $100, Adapter= $35 on VB website). Basically, I'm curious to find out if people think that the water tool is worth the money.

For me I am content just using the VB2 without water but if I find the right tool for the right price I might consider it for more at home type use.

SevoJetLife said:

What does everyone think of the water tool for VB2? I am trying to decide if I should buy a DLX Shower Kit for about $160 or buy the Pong Tapered adapter (vaporblunt website) and find a water tool off of a website like grasscity (Total of about $100, Adapter= $35 on VB website). Basically, I'm curious to find out if people think that the water tool is worth the money.

For me I am content just using the VB2 without water but if I find the right tool for the right price I might consider it for more at home type use.

Click to expand...

I should test more now that I'm more experienced with the technique it takes to vape this device, but IMHO, its not worth it, due to the free-flow of air in the VB2 and no drag on the WT's. I own the chandelier, and speak from experience. I definitely want a convection vape to use with WTs, one I wouldn't have to stir whether its mounted or tubed to the device.

D33z said:

I should test more now that I'm more experienced with the technique it takes to vape this device, but IMHO, its not worth it, due to the free-flow of air in the VB2 and no drag on the WT's. I own the chandelier, and speak from experience. I definitely want a convection vape to use with WTs, one I wouldn't have to stir whether its mounted or tubed to the device.

Click to expand...

So what your saying is that the problem is more about the type of vape and technique required to draw out vapor, not the WT itself? That makes sense because I think it might be easier to get more vapor with the Solo and a WT.

Could you use the VB Water Tool with other vapes? that would make it easier buy, IMHO.

Thank you all for the very open welcome I got from the community. I am so glad to now be a part of such an informative thread. And yes guys the vapes keep getting better day by day. So i ventured out the very next day and replaced my broken shower-head WT with a brand new Shower-head WT. I really like it because of the bubbling sensation. One thing i notice Is that when i pack it full ,like recommended, and use the Pong adapter and WT , That when im done vapeing the pong adapter screen is covered in a hash looking syrup(trichomes). I let it go about 4 more packs and it got thicker and thicker. Im only vapeing on level 3 so i thought if i turned up the heat it would work. Sure enough i blazed all of trichomes that had gunked up on the screen, and a hell of a pack that was. Anyone else had any problems with the screen on the adapter gunking up?

Since then when i have used the WT and adapter I put slightly less so that the screen on the adapter does not actually touch the herbs inside.

It is still an everyday learning process and i plan to share more and more. happy vapeing guys!

gtblunt...load the unit before turning it on.

Got it, love it Awesome device.

Vaped some White Fire BHO last night, took some getting used to to get it to hit right but once it did....wow! So tasty, so medicated. Love it.

Im thinking about removing the white plastic piece on the oil attachment but how do i do that?

Oh yeah, and how do i clean the oil chamber?

Breathemetal said:

Got it, love it Awesome device.

Vaped some White Fire BHO last night, took some getting used to to get it to hit right but once it did....wow! So tasty, so medicated. Love it.

Im thinking about removing the white plastic piece on the oil attachment but how do i do that?

Click to expand...

just grab it with tweezers and it will pull off. a lot of people choose to remove it, it still functions well. cleaning is best done while hot and i use water and a q tip

TherealVaporblunt-
Is there anyway I can just get the Pong tapered adapter? I am in a state that you don't ship to... All I need is the adapter because I already have the WT

That white plastic piece doesnt look like it will just come off with some tweezer action lol

SevoJetLife said:

So what your saying is that the problem is more about the type of vape and technique required to draw out vapor, not the WT itself? That makes sense because I think it might be easier to get more vapor with the Solo and a WT.

Could you use the VB Water Tool with other vapes? that would make it easier buy, IMHO.

Click to expand...

I do plan to use it with either the inhalater xp or the davinci ascent, unless of course someone wants the WT when I sell my VB2. I really cant afford to have an arsenal of vapes. I do believe its just the way the VB2 works and the free spin of the WT.

"Started from the bottom now we're here...."

Lol the whole team