Discontinued Inhalater XP

Skoomad

New Member
Hey guys, I just received mine today but there's a problem : it doesn't work. I fully charged it and all it does when I select a temperature is the light blinking a few times and no heat whatsoever. I tried it a dozen times and no results, even when plugged in. There's not even the slghtest heat, even on the highest setting...
Anyone else having the same issue?
 
Skoomad,

2clicker

Observer
Hey guys, I just received mine today but there's a problem : it doesn't work. I fully charged it and all it does when I select a temperature is the light blinking a few times and no heat whatsoever. I tried it a dozen times and no results, even when plugged in. There's not even the slghtest heat, even on the highest setting...
Anyone else having the same issue?

where did you order it from?
 
2clicker,

PAZ

Well-Known Member
I really cant believe you had that many problems.. did u take pics of it or anything? I can crush my capsule and itll pop back together..

And this seems like an issue with your inh004.. this is the xp thread bra, deuces

5am1xt.gif

Did you use any attachment on that? I have the GonG from PV but it's tilted so I can't just stick the vape right on it.
 
PAZ,

Sonics420

Well-Known Member
Nope it jst sits on my bong perfectly and even feels like a tight seal..18mm i believe..works on my 14mm bubbler also.

And that gif was the very first hit on a fresh capsule.. it gets even thicker if you inhale slower.
 
Sonics420,
  • Like
Reactions: ru_frothi

Edward Hyde

Well-Known Member
Hey guys, I just received mine today but there's a problem : it doesn't work. I fully charged it and all it does when I select a temperature is the light blinking a few times and no heat whatsoever. I tried it a dozen times and no results, even when plugged in. There's not even the slghtest heat, even on the highest setting...
Anyone else having the same issue?



mine came in and worked pretty well, after 3 days tho it started not working...when i turned it on it started flashign 3 times steadily then turned off...now it doesnt even turn on...the manufacturer said its electronics problem and asked me for a shipping adress for a replacement unit...i sent it to him ,unfortuantely he hasnt got back to me yet...I hope the replacement unit wont be a wait like for the first(defective) unit.
 
Edward Hyde,

tikimaize

Big Rigger Approved!
mine came in and worked pretty well, after 3 days tho it started not working...when i turned it on it started flashign 3 times steadily then turned off...now it doesnt even turn on...the manufacturer said its electronics problem and asked me for a shipping adress for a replacement unit...i sent it to him ,unfortuantely he hasnt got back to me yet...I hope the replacement unit wont be a wait like for the first(defective) unit.

Mine did the same thing to me yesterday. Used it once earlier in the day, worked great. Tried it again later on and the heat light doesn't even come on. Unit was fully charged before the first use. Tried hooking it up to charger and it did not help. Waiting to hear back about what to do from here. I'm assuming I will have to ship it back, but I am really concerned about sending a used unit through customs. Not sure what to do here.

Figures, I just ordered the plastic bubblers and smooth flow ceramic water conditioner. Oh we'll hopefully ill be back up and running soon.
 
tikimaize,

Rrose Selavy

log enthusiast
Im sad to here people are having trouble with some units hopefully the new shipment wont have this problem because i plan on ordering one next week. as long as inhalater takes good care of people with issues its all good i hope everyones issues gets taken care of promptly. good luck
 

Bronzs

New Member
Im sad to here people are having trouble with some units hopefully the new shipment wont have this problem because i plan on ordering one next week. as long as inhalater takes good care of people with issues its all good i hope everyones issues gets taken care of promptly. good luck
Yeah same here. I feel like calling the company next week and making sure all the bugs have been figured out before I order one.
 

Rrose Selavy

log enthusiast
Yeah same here. I feel like calling the company next week and making sure all the bugs have been figured out before I order one.
If you do call i would be curious to know the answer. im sure they will say all the bugs are fixed. i know i want the xp i just want to make sure inhalater is good with warranty repair. i know some people have already got defective units replaced so im sure anyone with issues can get a new unit im just not sure if it always takes a long time or if they are just backed up.
 
Rrose Selavy,

2clicker

Observer
i think i will be ordering also, but really dont want to have to send it back after a couple of days just to get a working unit...
 
2clicker,

Rrose Selavy

log enthusiast
i think i will be ordering also, but really dont want to have to send it back after a couple of days just to get a working unit...
exactly i think we are all in the same boat. though it does seem that this issue is few and far between.
 
Rrose Selavy,

JoeKickass

Well-Known Member
I love this. :D
Yeah great piece sonics!

I'm wondering what exactly went wrong with these dead inh's, I think it's basically like the Pax electronically:
-Battery charging circuit
-Heater with electronic switch (transistor)
-Temp control to turn on and off the heater

What I find interesting is that the Inh stops heating first and then stops charging? Is that right?

You would think a blown component would only affect a single part of the device, whatever is going on, it must be something that can affect all parts of the Inh circuitry... maybe a faulty charging circuit let the battery drain without looking like it? A dead battery would certainly make it look like the whole device is dead.
 
JoeKickass,

tikimaize

Big Rigger Approved!
Yeah great piece sonics!

I'm wondering what exactly went wrong with these dead inh's, I think it's basically like the Pax electronically:
-Battery charging circuit
-Heater with electronic switch (transistor)
-Temp control to turn on and off the heater

What I find interesting is that the Inh stops heating first and then stops charging? Is that right?

You would think a blown component would only affect a single part of the device, whatever is going on, it must be something that can affect all parts of the Inh circuitry... maybe a faulty charging circuit let the battery drain without looking like it? A dead battery would certainly make it look like the whole device is dead.

I think mine is still charging. The charging light will come when plugged in and automatically shut off when fully charged. Although without being able to heat it I cannot truly tell if it is actually charging.
 

Uke

New Member
I have been having the same problem. Worked for a while , then stopped heating up . No light comes on now though unless its plugged in .

Also gave inhalater my shipping address , just as Edward hyde did . Been waiting a week : P havent gotten back to me either .
 
Uke,

Rrose Selavy

log enthusiast
hope you hear from them soon. does anyone know if taking the sticker off voids the warranty ?
 
Rrose Selavy,

weenstoned

Well-Known Member
Got mine yesterday. Charged it fully before using it. Worked a few times then I smelt burning plastic and now it will not turn on. Charging light still comes on while plugged in. I guess mine was one of the earlier units as it has 4 air holes. Hopefully the company makes this right.
 
weenstoned,
  • Like
Reactions: Sonics420

Sonics420

Well-Known Member
This is crazy how so many units are failing, did they launch too early?? Feel real bad but hopefully they take care of you guys in a timely manner.
I can say mine is going strong and its my main vape that I use everyday.. Good thing I got the 004 as a back up though. Hopefully they work out all the kinks, maybe they need to look @ my unit as it seems perfect lol.
 
Sonics420,

Rrose Selavy

log enthusiast
Got mine yesterday. Charged it fully before using it. Worked a few times then I smelt burning plastic and now it will not turn on. Charging light still comes on while plugged in. I guess mine was one of the earlier units as it has 4 air holes. Hopefully the company makes this right.
did you order from PV
 
Rrose Selavy,

weenstoned

Well-Known Member
did you order from PV

Yeah I ordered Jan 15th and it shipped out the 22nd of Feb.

This is crazy how so many units are failing, did they launch too early?? Feel real bad but hopefully they take care of you guys in a timely manner.
I can say mine is going strong and its my main vape that I use everyday.. Good thing I got the 004 as a back up though. Hopefully they work out all the kinks, maybe they need to look @ my unit as it seems perfect lol.

Does yours have two holes or four? If it has two then maybe only four holed units are a problem. Otherwise maybe you just got lucky.
 
weenstoned,

Dreamerr

Always in a state of confusion and silliness♀
That is exactly why I had asked ru if it was worth doing my warranty change...what do you think sonic. I certainly have a well working unit with a glitch that I work around. I don't want to deal with sending stuff back to Canada and customs and all that non-sense. I was doing my exchange through Taylor when he got them in but with the failures I am suspect. This is the IMPROVED WORKED OUT THE BUG MODEL or so they said.
 
Dreamerr,
  • Like
Reactions: ShipDit
Top Bottom