Arizer Solo
- Thread starter Rockwise
- Start date
-
- Tags
- arizer battery powered
JSteez4205
aka Gordon NugzB
i I imagine since you can remove the battery core and heater that you could essentially remove the outer shell completely which would enable you to paint & modify to your tastes... I'd check to make sure your paint is temperature safe if I were you...maybe that's not even a thing, I don't know much about paint.
Red Indy
Low carbon PSYCHONAUT
Great idea!!
It unscrews quite easily at the bottom (4 tiny screws) and the top cover of the heating element can be screwed off as well.
Than you can take off the outer casing from the part where the battery houses and the circuitboard sits.
When you take it apart you will see that the battery has most of the weight, so the casing, after taking out the electronic part, can be easily (spray)painted.
m0sh
Singer Song Writer Stoner
More than sure, I always charge fully...
What you are saying is not occurring.
M1A4xxxxxx
kingofnull
ace
More than sure, I always charge fully...
What you are saying is not occurring.
Maybe they did fix the issue? Mine is M1A3XXXXXX.
olivianewtonjohn
Well-Known Member
m0sh
Singer Song Writer Stoner
Maybe, but then again my battery dropped to "5" from "7" after one session at 5 with my M107
kingofnull
ace
I agree, I never once combusted with my Solo.
poonman
Well-Known Member
kingofnull
ace
It's definitely something I appreciate after having accidentally combusted twice in the E-nano.
poonman
Well-Known Member
You're correct with that link onj ,
But I think ataxian also mentioned , it's not as simple as just plug it in .
There " may " be some soldering or attachment/plugs involved .
He post it a few pages back ...
It will still be cheaper tho .
poonman
Well-Known Member
Ya the Zenman ,
What was his fee again ?
if you know ....
I think he's been busy playing with the Pax or inh004 ....
poonman
Well-Known Member
where do you find his battery thread ?
SteezyJ
Well-Known Member
???
timmahsan
treEnt
I just wanted to let you all know that I received the $40 bubbler from pipesdaddy and the PHVES GonG adapter, and it hits well! Does anyone have any temperature recommendations? I tried starting at a 3, and didn't get much visible vapor. I tried a fresh bowl at a 6 and 7 and whoa--that was a lot of vapor!
modnote: sorry, tried to merge my back to back post, couldn't delete the second one!
I like my short turbo's for just myself. quick bowls and nice even brown ABV. I usually do two. It is very ritual-like for me. My wife is pregnant and is very sensitive to smells, so I am stuck outside medicating.
modnote: sorry, tried to merge my back to back post, couldn't delete the second one!
chromehorse
New Member
I just got my Arizer and it seems like the battery is underwhelming. I've been vaping at about temp 4 with a very loose grind and domed screen. The LED's flash once at 7 and then it shows a lower number which I assume indicates charge. When the battery is supposedly empty, it is not heating at all and has a solid red charge button.
I just started the last stem with a battery charge of 6. I put the setting up to 7. It hovered heat wise around 7 but would drop quickly to 2-3 and heat back up after I started inhaling. Not sure how fast I'm supposed to draw, but I've been drawing very hard. When I first got it a couple days ago, I was drawing really slow, about as fast as you would a magic flight. Anyway, that last 12 minute session which was maybe 6 minutes at 7 and 6 minutes at 2-3~ dropped the battery from 6 to 2. Are my batteries not matching expectations? Or am I drawing too fast and hurting the battery that way by forcing more current to heat the air? I put the battery on the charger about 5 minutes ago and it's already up to # 4 so that's another interesting point. Is the battery "memory" weak and needs to be completely depleted and charged for a few hours? For anyone curious, the model number begins with M1A4.
Update: I just ran through a session on the arizer. Toasted to light brown when finished. Started at battery 7 and now at 5.
I just started the last stem with a battery charge of 6. I put the setting up to 7. It hovered heat wise around 7 but would drop quickly to 2-3 and heat back up after I started inhaling. Not sure how fast I'm supposed to draw, but I've been drawing very hard. When I first got it a couple days ago, I was drawing really slow, about as fast as you would a magic flight. Anyway, that last 12 minute session which was maybe 6 minutes at 7 and 6 minutes at 2-3~ dropped the battery from 6 to 2. Are my batteries not matching expectations? Or am I drawing too fast and hurting the battery that way by forcing more current to heat the air? I put the battery on the charger about 5 minutes ago and it's already up to # 4 so that's another interesting point. Is the battery "memory" weak and needs to be completely depleted and charged for a few hours? For anyone curious, the model number begins with M1A4.
Update: I just ran through a session on the arizer. Toasted to light brown when finished. Started at battery 7 and now at 5.
Red Indy
Low carbon PSYCHONAUT
Well, no total combustion, not white burned ash, I agree, but when I take it to #7 the content of my stem surely looks black on the surface and has a very burned smell to it.
Over #4 I notice that the color changes the hotter it gets, also there will be more vapor but the taste will be less, as is the smell.
In my new M1A3 I even noticed that it got partialy darker on #4, not every time but it happened and I could taste it as well.
m0sh
Singer Song Writer Stoner
You smell benzene that starts building at 400C and above...and the blackness is the chlorophyll.
I want to remind you that if you really combust then the chamber+stem would smell like s**t, forcing you to wash it ASAP.
Red Indy
Low carbon PSYCHONAUT
Hmmm...you might be right there but I really have no idea what benzene would smell like, it smells burned to me.
m0sh
Singer Song Writer Stoner
Well, try burning the herb then smell it, also put a LED flashlight on your "black ABV" and notice how green-brown it is.
Benzene is formed during the heating process....