Ed's TnT Wooden Vapor Tubes & Vapor Stems

Ed's TnT

Woodsman
Manufacturer
Thanks Mom, its alota fun! Still got a long way to go to get it right, I only wanna offer the best I can. I see what I want in my head just making it happen is all now!

I also wanna say I appreciate everyone's interest in my work, it does mean a whole lot to me!
 

Sonics420

Well-Known Member
1hazja.jpg


thanks for the stem, cant wait to try it out. would like to thank you for the screens also i was needing some extras. ALSO shipping was QUICK.. less than 3 business days it was here. will be sure to leave a great review on amazon for you :cheers:
 

Maynard G Krebs

Well-Known Member
Just received my Granadillo solo tube.. couldn't be happier.. I did notice a bit of a 'wood' taste to it just inhaling thru it, so I gave it a good rinse and dry. After about an hour or so, when I was pretty sure it was no longer damp, I put it on the Solo and gave it a couple full run's on '7'. Loaded it up and took 'er for a test drive. I got very little if any flavor degradation from the wood tube. It's a very handsome look and I'm going to order another one so I've got one to go and one to show, so to speak. I need to find some sort of plastic or rubber cap to put over the 'bowl' end of the tube do I can carry a loaded one while traveling.. I can have them both loaded for quick load and go... I love the thing.. great work Ed.. sure hope you start offering the Dugout for the solo tube.

mgk :smug:
 

m0sh

Singer Song Writer Stoner
why don't you buy one of his dugouts for the solo? You know it comes with a mini stem right?

Yes but then I'm defeating the purpose ... there's no reason to get it if I'm only using the stem...I try to avoid combustion anyhow...
 
m0sh,

Ed's TnT

Woodsman
Manufacturer
Yes but then I'm defeating the purpose ... there's no reason to get it if I'm only using the stem...I try to avoid combustion anyhow...

You would use the solo dugout to store your stash and the shorty for use. There is no combustion involved!
 
You would use the solo dugout to store your stash and the shorty for use. There is no combustion involved!
yes what Ed's said.
Yes but then I'm defeating the purpose ... there's no reason to get it if I'm only using the stem...I try to avoid combustion anyhow...

he makes a dugout for the solo. So its made with a shorty stem and a stash spot like he said. No need to combust
 
VapeNStone,
  • Like
Reactions: Ed's TnT

m0sh

Singer Song Writer Stoner
yes what Ed's said.


he makes a dugout for the solo. So its made with a shorty stem and a stash spot like he said. No need to combust

I guess I never really understood what a dugout meant...thanks for clearing it up mate
 
m0sh,
I guess I never really understood what a dugout meant...thanks for clearing it up mate
No you were right. The original dugout is meant for stealth combustion(cig looking one hitter and a spot for your stash). But Ed redesigned one of his dugouts specifically for the solo(shorty solo stem and I believe a stash spot and maybe even a spot for your ABV). Its a special request type item. So get in contact with him if you want one.
 
VapeNStone,
  • Like
Reactions: Ed's TnT
Hey Ed.. I'd be very interested in purchasing one of the Solo Dugouts.. Don't see 'em on ur site..

Thanks,!!

mgk
That's because you would need to contact him on it as its a special request type item. That is even if he has the wood available to make it in. So you would most likely have to wait for a bit. I would email him or give him a call if your interested.
 

vorrange

Vapor.wise
No you were right. The original dugout is meant for stealth combustion(cig looking one hitter and a spot for your stash). But Ed redesigned one of his dugouts specifically for the solo(shorty solo stem and I believe a stash spot and maybe even a spot for your ABV). Its a special request type item. So get in contact with him if you want one.

If i'm not mistaken it was Stu who ordered one of these dugouts. Now that i have a Solo, looks like a nice addon. And i don't have any of Eds Stems yet. :D
 

Stu

Maconheiro
Staff member
If i'm not mistaken it was Stu who ordered one of these dugouts. Now that i have a Solo, looks like a nice addon. And i don't have any of Eds Stems yet. :D
You are not mistaken, vorrange. I posted this in the Solo thread a while back when I got it:

http://fuckcombustion.com/threads/arizer-solo.3833/page-346#post-278938

I haven't really used it as it still needs a spring mechanism installed to get it to "pop up" the stem when the lid is opened. Otherwise, you'll have problems getting out the stem without spilling your weed all over the place.

It is beautiful, though, and the shorty stem works great for vaporbonging.

2nv9jyd.jpg


:peace:
 

Ed's TnT

Woodsman
Manufacturer
Hello and good morning all, have been in the shop slammed again with more wood work. Am working on Solo stems now, just got the SS bushings in and am back turning wood.

I appreciate your input on the above fellas, yes they are correct, the wooden solo dugouts are a special piece that hasnt gone to my website yet. Not sure how many or if I will offer these in the ordinary. I have 3-4 of these made and will let them go if you wanna get in on em, you would need to contact me and lets talk more about it. Thing is I am having trouble finding a spring that is just right for the box. Gotta have one that will push the solo stem out so you dont have to turn it upside down. Stu was the only one that has gotten one so far.

I hope all is well out there and thanks again stu and VNS, I appreciate your interest Mosh, Vorrange, & Krebs.
 
Ed's TnT,
  • Like
Reactions: Vitolo

Maynard G Krebs

Well-Known Member
Hello and good morning all, have been in the shop slammed again with more wood work. Am working on Solo stems now, just got the SS bushings in and am back turning wood.

I appreciate your input on the above fellas, yes they are correct, the wooden solo dugouts are a special piece that hasnt gone to my website yet. Not sure how many or if I will offer these in the ordinary. I have 3-4 of these made and will let them go if you wanna get in on em, you would need to contact me and lets talk more about it. Thing is I am having trouble finding a spring that is just right for the box. Gotta have one that will push the solo stem out so you dont have to turn it upside down. Stu was the only one that has gotten one so far.

I hope all is well out there and thanks again stu and VNS, I appreciate your interest Mosh, Vorrange, & Krebs.

Count me in.. I did email you in regards to this, but never heard back from you, so I thought I'd rattle you're cage here. I'm a very patient person.. let me know when you're ready to rock..

mgk :tup:
 
Maynard G Krebs,
  • Like
Reactions: Vitolo
Hello and good morning all, have been in the shop slammed again with more wood work. Am working on Solo stems now, just got the SS bushings in and am back turning wood.

I appreciate your input on the above fellas, yes they are correct, the wooden solo dugouts are a special piece that hasnt gone to my website yet. Not sure how many or if I will offer these in the ordinary. I have 3-4 of these made and will let them go if you wanna get in on em, you would need to contact me and lets talk more about it. Thing is I am having trouble finding a spring that is just right for the box. Gotta have one that will push the solo stem out so you dont have to turn it upside down. Stu was the only one that has gotten one so far.

I hope all is well out there and thanks again stu and VNS, I appreciate your interest Mosh, Vorrange, & Krebs.
I'll be in on one of those dugouts when I can vape again lol. Should be a few more months. :tup:
 
VapeNStone,
  • Like
Reactions: Vitolo

vorrange

Vapor.wise
Hello and good morning all, have been in the shop slammed again with more wood work. Am working on Solo stems now, just got the SS bushings in and am back turning wood.

I appreciate your input on the above fellas, yes they are correct, the wooden solo dugouts are a special piece that hasnt gone to my website yet. Not sure how many or if I will offer these in the ordinary. I have 3-4 of these made and will let them go if you wanna get in on em, you would need to contact me and lets talk more about it. Thing is I am having trouble finding a spring that is just right for the box. Gotta have one that will push the solo stem out so you dont have to turn it upside down. Stu was the only one that has gotten one so far.

I hope all is well out there and thanks again stu and VNS, I appreciate your interest Mosh, Vorrange, & Krebs.

Ed, i would get the dugout once the spring is done, but is it possible to get just a mini stem, say blackwood? ;) That would be a more pressing concern.
 
vorrange,

Stu

Maconheiro
Staff member
I think it's just a matter of finding the right one. Proper size, resistance, etc...

I keep telling myself I'll stumble across one around the house, but I've not found one yet.
:peace:
 

Ed's TnT

Woodsman
Manufacturer
Good morning, just sent ya an email Krebs, pls forgive me for the delay bro.

I think it's just a matter of finding the right one. Proper size, resistance, etc...

I keep telling myself I'll stumble across one around the house, but I've not found one yet.
:peace:

This is exactly right Stu, its all about the right spring and these things arent just laying around out there. I have tried fastenal and all theirs is either to small OD or the spring rate is to low itself. The stems is just over a 1/2" OD so am looking for one that is this size so that I can just bend it slightly outa round on both ends so it will grab the bottom of thee wooden hole and push the stem out of the top. Maybe alot of it is just time. Have been slammed with alot of other work and put these on the back burner. I will try and google it today and see if I can find something out there that will work.

Pls hang in there with me!
 
Ed's TnT,
  • Like
Reactions: Vitolo
Top Bottom