. Beware!
I tell you what it will do as well almost zero out accidental combustion! Well it did for me and it alows the heat helix shape to actually have enough clear path to form then it almost suspends the herb in the airflow, run it hot bro! 3-4 pmekulaj said:Cleaned my wand last night. Then I took a couple seconds to clean my pick, and the wand fell off the counter to a 3 foot drop and broke...
Just bought a fatty wand because I usually used about 3 bowls on the standard wand per session. Hopefully it saves me some time. I also bought a hands free attachment, which I think I'll use occasionally depending on the situation. $45 out of my pocket because I wasn't careful enough (I was pretty careful) while cleaning... and because I'm impulsive enough to buy accessories I don't need
Flickr - Where exactly does that little shim go? I took my heater cover off a few days ago and when I put it back on I had no clue where to put the shim so i guessed...Frickr said:
Thanks for your help Frickr. I'm an idiot, I just read the FAQS on 7th Floor's site and they mention something about a bent piece, which is the small shim, which is what I thought was bent because of me, and I bent it back. Like a moron. Its been working fine but I think I will try and fix it tonight, if I can't hopefully 7th Floor will lend me a hand...Frickr said:
First off thanks lol, Honestly I jus got it a few days ago and am still in the learning curve myself. I havent had time to extensively perfect the spherical ground glass kit yet. But I have tried it out and it seems to give off very nice rips around higher temps between 2-3 however with that said I wouldnt be surprised if it could hit jus as well at lower temps. Hopefully others who also have the spherical kit can give feedback as well. For now I cant really say I found any cons with any of the Wands I own haha.lwien said:
Wow that sucks maan. Im actually from Winnipeg, Manitoba and Ive ordered tons of shiet from 7th Floor for both my SSV and DBV and i means tons lol. It usually only takes about 1 and a half weeks for me to get my stuff from them. I get mine shipped out to a friend who owns a local headshop. So what are you expecting anyway?! SSV with some custom pieces haha?Mark said:
Have you tried using any oils yet? I am planning on buying the GG kit from 7th Floor this weekend and I was on the fence about getting the aroma top. Do you just drop some oils onto it and thats it? I read something about adding wax and that confused me...spazo555 said:I jus got an aroma top for my SSV the other day. I didnt really need it, but I thought id try it out anyway I mite enjoy the nice smell in my room. lol turns out that It made my vaporizing experience a lot better. And its not because of the purpose its suppose to serve haha. Rather than diffusing oils to make my room smell better I use the top just to keep the temperature inside the SSV nice and warm soo when it goes up the carb whole on the heater cover it heats up my greens in my wand faster thus giving off a thicker hit compared to vaporizing without the aromatop.
For my SSV, combustion starts to occur closer to 3-4 o'clock taking medium consistent hoots. So normally I set mine to 1 o'clock with or without the top. However with the aromatop on at 1 o'clock the hits feel like I have it cranked up to 3 o'clock and almost combusting my weed lol. Yet when I check my wand out after 3-4 thick rips, it has just barely begun to turn light brown at the top. Soo basically I'm in love with the aromatop right now lol but not for what it's suppose to be used for lol .
really? It doesn't seem like it would make that much difference in the temperature inside the wand... maybe make the outside of the SSV hotter...spazo555 said:I jus got an aroma top for my SSV the other day. I didnt really need it, but I thought id try it out anyway I mite enjoy the nice smell in my room. lol turns out that It made my vaporizing experience a lot better. And its not because of the purpose its suppose to serve haha. Rather than diffusing oils to make my room smell better I use the top just to keep the temperature inside the SSV nice and warm soo when it goes up the carb whole on the heater cover it heats up my greens in my wand faster thus giving off a thicker hit compared to vaporizing without the aromatop.
For my SSV, combustion starts to occur closer to 3-4 o'clock taking medium consistent hoots. So normally I set mine to 1 o'clock with or without the top. However with the aromatop on at 1 o'clock the hits feel like I have it cranked up to 3 o'clock and almost combusting my weed lol. Yet when I check my wand out after 3-4 thick rips, it has just barely begun to turn light brown at the top. Soo basically I'm in love with the aromatop right now lol but not for what it's suppose to be used for lol .
Sorry if you misunderstood what I had posted. It doesnt affect the temp in the wand and it also doesnt make the SSV unit hotter. It's all glass and does get hot but should not be used at high temps past 2 o'clock according to whomever I had spoken with over the phone at 7th Floor the other day due to risk of it cracking.. The aromatop seals over the top of the SSV completely exposing only where you attach the wand to the heatercover. So what I was trying to say was that because of the nice seal overtop of the SSV the air inside of the unit that your gonna be pulling up the carb hole on your heater cover when you draw is already gonna be nice and warm. As oppose to without the aromatop where your pulling in cold air and using the ceramic element to heat it up as it goes into your wand. I hope that kinda clears it up I tried to explain as best I can if its still confusing I can draw up an easy diagram on paint lol.darth_vapor said:really? It doesn't seem like it would make that much difference in the temperature inside the wand... maybe make the outside of the SSV hotter...spazo555 said:I jus got an aroma top for my SSV the other day. I didnt really need it, but I thought id try it out anyway I mite enjoy the nice smell in my room. lol turns out that It made my vaporizing experience a lot better. And its not because of the purpose its suppose to serve haha. Rather than diffusing oils to make my room smell better I use the top just to keep the temperature inside the SSV nice and warm soo when it goes up the carb whole on the heater cover it heats up my greens in my wand faster thus giving off a thicker hit compared to vaporizing without the aromatop.
For my SSV, combustion starts to occur closer to 3-4 o'clock taking medium consistent hoots. So normally I set mine to 1 o'clock with or without the top. However with the aromatop on at 1 o'clock the hits feel like I have it cranked up to 3 o'clock and almost combusting my weed lol. Yet when I check my wand out after 3-4 thick rips, it has just barely begun to turn light brown at the top. Soo basically I'm in love with the aromatop right now lol but not for what it's suppose to be used for lol .
Sidebar: Are the SSV heater covers compatible with the DBV and vice versa?
No I have not tried any Oils yet but I have tried the wax melts and they do work quite well actually. Definitly masks the smell but then again vape doesnt stank too badly anyway. But yea it does its job really well not to mention making hits a lil more potent lol. With the melts you jus let it sit and do just that haha let it melt. I believe what your talking about is a method where you add 2 drops of oil as the wax balls are starting to melt.AgentofChaos said:Have you tried using any oils yet? I am planning on buying the GG kit from 7th Floor this weekend and I was on the fence about getting the aroma top. Do you just drop some oils onto it and thats it? I read something about adding wax and that confused me...spazo555 said:I jus got an aroma top for my SSV the other day. I didnt really need it, but I thought id try it out anyway I mite enjoy the nice smell in my room. lol turns out that It made my vaporizing experience a lot better. And its not because of the purpose its suppose to serve haha. Rather than diffusing oils to make my room smell better I use the top just to keep the temperature inside the SSV nice and warm soo when it goes up the carb whole on the heater cover it heats up my greens in my wand faster thus giving off a thicker hit compared to vaporizing without the aromatop.
For my SSV, combustion starts to occur closer to 3-4 o'clock taking medium consistent hoots. So normally I set mine to 1 o'clock with or without the top. However with the aromatop on at 1 o'clock the hits feel like I have it cranked up to 3 o'clock and almost combusting my weed lol. Yet when I check my wand out after 3-4 thick rips, it has just barely begun to turn light brown at the top. Soo basically I'm in love with the aromatop right now lol but not for what it's suppose to be used for lol .
