• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Customized vape setups

ilovebOObs

can i stick my male joint in there?
I just got word from fishbone that he's gonna be able to start on a custom order soon :D
He's been busy with a big wholesale order, but he said it'll finally be done soon and I'm at the top of his list :)

I'm getting a few bits & pieces, the main one being a Super Worked Space theme dome (I gave him free reign to make it awesome, so it should be cool).
I'm also gonna get him to make me a stand for the VXC Hydratube - here's a crappy sketch I did in paint:

It'll also let me use the Hydratube with other vapes that wouldn't normally allow use in the vertical fashion a HT is normally used :tup:


i was gonna ask glassafarian to do something similar but i don't think he fully understood me. hahah
 
ilovebOObs,

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
Is there any specific place to spam some nice glassporn ? I hope this is the one :).
REHAB 24 Arm Tree Perc Bubbler
and disc
RH24BU-5T.jpg
RH24BU-2T.jpg
RHDBU-4T.jpg
RHDWA-2T.jpg

Some other matrix perc and
Delta 9 Triple Shower
DLOM-BUB-2T.jpg
DLSC-7-2T.jpg

Nice vapor rig with many removable parts :)
LQP79-5T.jpg
LQP79-4T.jpg

Double cricket perc from Pyrology
PYDCRKT-2T.jpg
PYDCRKT-4T.jpg
 

BigDaddyVapor

@BigDogJunction
Well, my coming next week SSFG, now qualifies as a custom blown and fitted rig. Ray had to make the mini inline and downstem for my order and today he found out he didn't have the beaker size I wanted. Instead of sending me the 8" - 10" they offer on sales, he specifically blew me a 10" one today.

Everyone keep their fingers crossed for the kiln. We won't know until tomorrow.

So a routine random purchase, has turned into a full custom job! :D
 

SD_haze

Well-Known Member

illeg

Well-Known Member
cool piece... that base reminds me the zob I just picked up. looks like the blackleaf is a bit larger though.

IMG_20120618_154255.jpg

How do you like the zob? I was looking at those for a first bubbler.

Have you tried taking the logo off? If so, how did you do it?
 
illeg,

BigDaddyVapor

@BigDogJunction
Yahoo! Got word from Allison. My package is in the mail! Will be here no later than Monday, according to her. Sucks, though because I will be gone most of the day. But an awesome welcome home surprise after what I'm guessing, will be another boring day, at the VA.
 
BigDaddyVapor,

SD_haze

Well-Known Member
Definitely would consider this a customized vape setup!


If you follow the omicron/VXC thread and this is a re-post, here's a picture of 20grams of the same batch of nectar thats vaporized in the video.

Sour Diesel :drool:
I know it looks dark, but thats because its 3inch thick. A small piece is verry translucent & golden
458951_124496757688195_1476805017_o.jpg
 

BigDaddyVapor

@BigDogJunction
Well, well, well. HELLO GLASS SNOBS! I COME TO JOIN YOUR RANKS!

I humbly present to you, my custom (yes, it was custom blown my specifications) SSFG 3pc Vapor Rig and a Special Guest Star, a SSFG Gridded (EIGHTEEN HOLES) Inline Bubbler. I hope that you might take my application, this time seriously. I have avoided the dreaded Must Buy Glass NOW, Don't Care Its Chinese Curse and laid hands on something made with thought, care and good ol' USA glass!

Without further ado, I give you...

SSFG 10" Travel Beaker w/ SSFG Showerhead Downstem & SSFG Mini Inline AC/Perc
(excuse the crooked perc. I was SO excited and hadn't even used the pieces yet.)
20120728_153903.jpg


Its a little front heavy. But with water in it... it doesn't tip. Plus... its @#$%ing 10" tall and holds up a inline perc, w/ an 18mm female joint. BAHAHAHA! This thing clears like a jet engine!
20120728_153918.jpg


Can't see it here, but the downstem is off-center. But that's the nature of hand-blown glass. There are going to always be slight imperfections. (like unlevel fritted percs :D)
20120728_153930.jpg


Another side view
20120728_153945.jpg


Closeup showerhead. @#$% this thing has a LOT of slits. BUBBLES!
20120728_154001.jpg


Close-up joint. Thick and sturdy.
20120728_154037.jpg


18mm female joint, 18/14 showerhead downstem, 14mm male joint perc
20120728_154044.jpg


Mini 12-cut Inline AC/Perc 14mm male/18mm female (shotgun clear - *BOOM*). Sorry it looks so crooked (the picture really does exaggerate it). Me, in a hurry putting it together in haste.
20120728_154203.jpg


A little straighter, more closeup shot.
20120728_154059.jpg


Looking down the tube at three very tightly placed (no ice dropping past there) ice notches
20120728_154236.jpg


Now... another drumroll please!

My NEW SSFG Gridded Inline Bubbler

Front view. Notice the same bracing on the body to inline
20120728_154507.jpg


Inline perc... get this... EIGHTEEN holes. Not slits... holes.
20120728_154516.jpg


SEE!!! (@#$%ing amazing!)
20120728_171107.jpg


Side view
20120728_154552.jpg


Yes, that is a closed end tube on the inline (the EIGHTEEN HOLE inline. Bahahahaha!)
20120728_154643.jpg


May I now (I would gladly wear AND defend the title), be considered a Glass Snob?
 

Bouldorado

Well-Known Member
How do you like the zob? I was looking at those for a first bubbler.

Have you tried taking the logo off? If so, how did you do it?


Those zobs are awesome; I highly recommend for a first piece. Glass is much thicker than what you typically find, and it hits very smooth. It actually has a lot of diffusion (gridded showerhead) so it's probably not the best piece if you want to vape strictly oil. I recently traded the zob for a mobius matrix, but that was only because I've had my eye on a mobius for a while. Compared to a piece that retails almost $100 more, the zob has thicker glass and perhaps a marginally rougher hit (subjective, since I haven't used the pieces back-to-back).

If you don't like the label, acetone and a razor blade should make quick work of it.
 
Bouldorado,
  • Like
Reactions: illeg

illeg

Well-Known Member
Those zobs are awesome; I highly recommend for a first piece. Glass is much thicker than what you typically find, and it hits very smooth. It actually has a lot of diffusion (gridded showerhead) so it's probably not the best piece if you want to vape strictly oil. I recently traded the zob for a mobius matrix, but that was only because I've had my eye on a mobius for a while. Compared to a piece that retails almost $100 more, the zob has thicker glass and perhaps a marginally rougher hit (subjective, since I haven't used the pieces back-to-back).

If you don't like the label, acetone and a razor blade should make quick work of it.

I'd be using this with a PD, so I'm liking the sound of this. Thanks for the quickie review.
 
illeg,

MarcellusWiley

Dab Trotter
And I just won that heady piece on BM :party:.
Total Price: $165 + Shipping - Which includes my choice of Push Slide, Curve, or Dome - I'm gonna go with the dome :D

Here's a vid the blower posted of it:

I'm starting to run out of room in my wardrobe for all this stuff :lol:

haha nice man! I think i remember seeing that the other day. great price!
 
MarcellusWiley,

photobooth

Well-Known Member
Nice catch, I was eyeing that one the other day too. Very nice art and I love the colours on it.
 
photobooth,
Top Bottom