Recent Acquisitions - Post Your New Pieces Here

Bouldorado

Bouldorado

Well-Known Member
aero18 said:
Why do you use such a large tube for oil? Oil rigs are typically small with low filtration, to preserve the flavor of the oil and to lessen the condensation of the oil (reclaim). And ice in an oil rig! :lol:
Click to expand...

because that's not an oil rig, well at least not entirely. I bought it as a general tube (combustion, vape-bong, and oils) and anyway it's on the smaller side, 1 ft, so its not too bad. I definitely agree that you need low filtration for vapor though. I picked up a 18" roor beaker with a single hole downstem off craigslist the other day. after using a pd to vape-bong, the roor tastes absolutely better, despite it being 6 inches taller and having the extra volume of the beaker.

P1000614.JPG
 
Bouldorado,
S

StrainToGain

Well-Known Member
Oooh ooooh, for those wanting to buy a cheaper RooR. Ive just seen on their website that everyonedoesit are running a 20% sale on all products for a Black Friday Promo they're doing. It looks like it only lasts until the end of the week. Make sure you get the voucher code from the homepage cause otherwise you won't get your discount. Hope that helps people wanting a RooR but thinking it's too much.
 
StrainToGain,
CombustionJunction

CombustionJunction

What's Your Function?
I love my RooR. I've never hit anything smoother. You truly get what you pay for. If you're wiling to spend the cash, you will be very happy with your purchase.
 
CombustionJunction,
  • Like
Reactions: Sinnerman.
E

e5cape

Member
CombustionJunction said:
I love my RooR. I've never hit anything smoother. You truly get what you pay for. If you're wiling to spend the cash, you will be very happy with your purchase.
Click to expand...

you should try SG then
 
e5cape,
Carbon

Carbon

Well-Known Member
It's just got battle damage now, but at least it still works. A funky looking stem on a functional tube beats a 300+ dollar paper weight.

I got my brother a Sovereignty Stemline at the beginning of the year, and it was left on the floor by the couch and took a dive. A long while later it got fixed but the stem wasn't perfectly vertical; it had a bit of a slant to it. We weren't happy, but dealing with the shop that fixed it got so tiresome that we just became glad to have it back and working. It's very slight but just wasn't the same as original. This is what should serve as a constant reminder to be careful. Glad to see it's up and running again.
 
Carbon,
Bouldorado

Bouldorado

Well-Known Member
I actually like the angle better than the straight stem. its nicer for vape-bonging and the oil dome isn't so close to your face. and it does have thicker glass, but still looks janky as hell. I'm not complaining, but the blower definitely could have done better work :)
 
Bouldorado,
SD_haze

SD_haze

Well-Known Member
It looks like the Vapexhale Cloud might nothave fit on that piece originally (too close to the tube) but NOW it looks like it would fit.

silver lining mebe ;)
 
SD_haze,
Gonzo

Gonzo

Slightly Stoopid
Went into my LHS today and saw a small bubbler made by GRAV LABS that caught my eye. I have never owned a piece of glass as I was a blunt smoker before converting to vapor. I decided to take a chance on the piece even though I had read no reviews about it.

My first piece, the GRAV LABS Hammer Bubbler

img0397bf.jpg


img0402fn.jpg


So far I have run one of my UDs through it and I am loving it. Very smooth hit and great taste. Will post a video up if I can get one.
 
Gonzo,
Abysmal Vapor

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
These videos show one of the benefits of the silicon stems.. U aint need a gong or adaptor.. just stick it and it will fit tight everywhere.. :)
 
Abysmal Vapor,
Gonzo

Gonzo

Slightly Stoopid
Loving my UD with this piece. MY LHS had a sale on them. I may pick up another as I have a habit of dropping things :ko:
 
Gonzo,
Gonzo

Gonzo

Slightly Stoopid
No gong adaptor. That's why I had to use the silicone stem to make the attachment. I had never seen one like it either. Works great though.
 
Gonzo,
Gonzo

Gonzo

Slightly Stoopid
Got some time to experiment with the new bubbler today and figured out a way to pair it with my WISPR :ko: Nice size clouds and very smoothe taste. Also cut out the popcorn taste from the last few hits. Day 2 and I am already looking at what my second glass piece is going to be. Considering a Wilson inline bubbler or maybe a Headford inline. Those are just two that I have seen that are appealing. Any other nice inline bubblers you guys can suggest?


Edit,
I will try to post a video of the WISPR the glass later tonight.
 
Gonzo,
hazy

hazy

combustion fucker
Manufacturer
I've never vaped with glass and I'm getting curious. I was thinking about a small cheapish glass bong to use with my PD, but now having seen this hammer bubbler... the size and simplicity of it are appealing. How much was it?
 
hazy,
Gonzo

Gonzo

Slightly Stoopid
It was $50 at a LHS. I have been looking for them online to compare pricing but so far no luck.
 
Gonzo,
Gonzo

Gonzo

Slightly Stoopid
Did not want to start a new topic for this so I thought I would post it here. Got a chance to go to the French Quarter to finish off some holiday shopping today and had a few extra minutes to stop in my favorite LHS that I know carries interesting pieces at times. Noticed the smallest 4 arm tree bubbler that I had ever seen and had to come out with it. Ran it with the UD and a little while ago and loving it.

img0423yg.jpg


img0424ij.jpg


img0425ht.jpg


It measures in a little under 6.5" from bottom to top of mouthpiece. Will post a video when I can :ko:
 
C

Canna Hound

Vapor test pilot/glass freak
Gonzo said:
Did not want to start a new topic for this so I thought I would post it here. Got a chance to go to the French Quarter to finish off some holiday shopping today and had a few extra minutes to stop in my favorite LHS that I know carries interesting pieces at times. Noticed the smallest 4 arm tree bubbler that I had ever seen and had to come out with it. Ran it with the UD and a little while ago and loving it.

http://img823.imageshack.us/img823/1769/img0423yg.jpg

http://img641.imageshack.us/img641/9596/img0424ij.jpg

http://img860.imageshack.us/img860/985/img0425ht.jpg

It measures in a little under 6.5" from bottom to top of mouthpiece. Will post a video when I can :ko:
Click to expand...

That is a really neat looking little bubbler. Really cool score...
Do you know what size the down-stem ground joint is?

The size is perfect to replace a mouth piece on a whip and with removable d/s, crushed ice can easily be added. I'm sold! Thank you for the pictures; I think this will be a great starting point for what will most likely be my first custom ordered piece of glass.

H
 
Canna Hound,
Gonzo

Gonzo

Slightly Stoopid
Your welcome, it really caught my eye when I saw it because it was unique looking. The down-stem ground joint is 14mm, perfect for attachments.
 
Gonzo,
YoGranMazPimp

YoGranMazPimp

I Vapes Hard
I went to denver yesterday and checked out illuzions glass. (for anyone in the area who hasnt been there, check it out, its amazing) anyway i was in awe by their selection and it was like the angelic choir sang as i came upon the mobius pieces. I loved the bubblers and after debating and a bit of indesiveness, i pulled the trigger and got me a mobius ion bubber with reti perc. Couldnt resist with a discount offered and another discount if i didnt take the slide bowl (fuck combustion) After the first session, i was amazed. The stacks of bubbles are amazing. Extreme low drag and just damn cool to vape from. The reti put my friend to bed and left me well baked for hours to come.

Check out my new baby....
20iyov7.jpg


Milkshots huh? Well heres a quick vid to check it.


https://www.youtube.com/watch?v=VKWMx3XDm24


No buyers remorse here.

Keep the thread going and proudly show your new equipment.
 
You must log in or register to reply here.
Top Bottom