Hey guys, I just got my aqua vape, and had some trouble getting the end of it to fit in to the UD stem. darkrom said he just puts it into the glass stem adapter silicone that dave gives you, is that any different from the normal stems? Also, I think I've read somewhere in this thread about "thin-walled" and "thick-walled" stems. Is this something that dave used to do, but only provides one variety of now, kinda like the 1/4 core?
For now, I made the aqua vape fit by making a small slit on the UD stem to make it open wider. But this is far from a permanent fix, and I'm looking for a more secure way to connect the UD and aqua vape.
For now, I made the aqua vape fit by making a small slit on the UD stem to make it open wider. But this is far from a permanent fix, and I'm looking for a more secure way to connect the UD and aqua vape.
Gonzo
Slightly Stoopid
@Barca
Dave's glass stems come with a different size 3/8" tubing which has a thinner wall. It is much more flexible and able to stretch while still making a nice seal. This is what use for all my glass connections. I only use the regular stems when doing dry hits. I buy the tubing in 3' lengths from Dave so I can cut my own stems and fittings.
Dave's glass stems come with a different size 3/8" tubing which has a thinner wall. It is much more flexible and able to stretch while still making a nice seal. This is what use for all my glass connections. I only use the regular stems when doing dry hits. I buy the tubing in 3' lengths from Dave so I can cut my own stems and fittings.
barca14 said:
Do you have a full size UD core or a 1/4" one (like a b-day vape)?
The stem tubing for the full size UDs (3/8") should fit the AV nicely but the tubing for a 1/4" core UD wouldn't be able to fit without slitting it or something like you've described.
scottio19 said:
Some will and some won't..
I switched over to a larger ID tubing a while back and they will fit in those ones but not the smaller ID (thicker wall) tubing of the older style. Some of the revised cores are using the old tubing so it's not as simple one-size-fits-all answer.
scottio19
scotty
underdog said:Some will and some won't..
I switched over to a larger ID tubing a while back and they will fit in those ones but not the smaller ID (thicker wall) tubing of the older style. Some of the revised cores are using the old tubing so it's not as simple one-size-fits-all answer.
but as long as it fits, the SS tip would fit into the heater port right? like would a PD stem fit? I could have sworn I have seen this answered before, I just can't find it through the 90 something pages
Edit: I found some info on page 54, I misunderstood you and thought you misunderstood me and thought I was talking about fitting the metal tip into the silicone. If that makes any sense. I have one of your newest twigs, I got it before you left on your trip. Does that mean I have the one that'll fit?
Gonzo said:
Thinner tubing transfers less heat to the stem (a good thing) and it's a bonus to be compatible with the other log dude's stems. I had been considering changing for a while then an opportunity came up to buy a few grand worth of thin tubing for a fraction of that. Couldn't pass it up so I grabbed it even though I still had a bunch of the old stuff.
I think I'm down to maybe 20 cores left with the old thick stuff so once that's all gone it'll be the thin stuff in all new pieces..
OhTheAgony
here for the chicks
He was talking about the inner diameter of the heater port Darkrom. Some logs use stems that are inserted in the heater port instead of going around it like with the UD, it only matters if you want to try out one of those stems.
[h]I'm baaaaaack![/h]
My trip was an exhausting yet great success and I am now officially back. I picked up some wood though not as much as I would have liked, I'll get some pictures when I can. Eager to get back on the UD horse and get stuff going again. Apparently a ton of rain while I was gone led to some minor shop flooding so I've got some cleanup to do but I'll be back in operation shortly.
Anyone who was waiting to send a piece in for exchange or repair can now do so at your convenience, if you want to do that and send me a message to let me know that'd be great. I will be trying to catch up on messages and whatnot in the order they came in so be patient and I'll get to yours soon I'm sure. If patience isn't your strong point you can always email again.
@ scottio - the picture you posted on the bottom shows the older style thick tubing, the thinner stuff is about 1/2 (maybe a bit more or less) the thickness (of the wall of the tube not the overall diameter) of that. If it looks thinner than what you posted it must be the thin stuff.
My trip was an exhausting yet great success and I am now officially back. I picked up some wood though not as much as I would have liked, I'll get some pictures when I can. Eager to get back on the UD horse and get stuff going again. Apparently a ton of rain while I was gone led to some minor shop flooding so I've got some cleanup to do but I'll be back in operation shortly.
Anyone who was waiting to send a piece in for exchange or repair can now do so at your convenience, if you want to do that and send me a message to let me know that'd be great. I will be trying to catch up on messages and whatnot in the order they came in so be patient and I'll get to yours soon I'm sure. If patience isn't your strong point you can always email again.
@ scottio - the picture you posted on the bottom shows the older style thick tubing, the thinner stuff is about 1/2 (maybe a bit more or less) the thickness (of the wall of the tube not the overall diameter) of that. If it looks thinner than what you posted it must be the thin stuff.
Abysmal Vapor
Supersniffer 2000 - robot fart detection device
Welcome back Dave 
! We can flood you now with questions and orders 
...
! We can flood you now with questions and orders ...
OhTheAgony
here for the chicks
Oh shoot, I hate coming home to a mess. Good luck with the cleanup & I hope nothing expensive was broken!
I just emailed you for the second time today, but you already answered one so please take your time with the other one.
Also, welcome back dude
I just emailed you for the second time today, but you already answered one so please take your time with the other one.
Also, welcome back dude