shadyonedeath
Well-Known Member
thats cuz market venders are full of shit.
Arizer Solo
- Thread starter Rockwise
- Start date
-
- Tags
- arizer battery powered
shadyonedeath
Well-Known Member
Anyonesd m106 stem seal get loose? Mine feels looser now, like I can swing the stem around with a flick of the solo. ..before i couldnt do that.
tokinginger
Member
I'm only confused about one thing, what is the cap for??
OhTheAgony
here for the chicks
I always assumed it's to keep dirt & dust out. I just took mine off again because it was in the way to much for my likings.
shadyonedeath
Well-Known Member
edit; see below 
E.F.Searles
Member
shadyonedeath said:
Don't have a 106, have a 105 and just last night noticed the same thing. Stems no longer hold themselves in like before.
After a few charges now I'm estimating my battery life at 1.5 hours at most and the unit is drained dead/in need of charge. On my 4th charge now. I've thought about keeping it on a charge when not in use but EVERY battery I have ever done that with doesn't keep a charge for long. Like my laptop for example. Newer laptop with lithium ion battery, I've kept it on charge when not in use since new and the battery was done for within a year. Talking bout wont keep a charge for 10 minutes now. Same with a few cell phones. My newest cell only sees a charge when it asks for it and that battery will last 4 days without a charge, going on a year now.
shadyonedeath
Well-Known Member
Anyone else getting serious headaches?
Vaped Ape
MMJ Therapist specializing in gynecology~wannabe
There was a guy a hundred pages back that reported headaches. Maybe drawing too hard?? Really with so many people with sinus issues I am surprised more people don't complain of headaches as not all sinuses are equal.
As a side note I had a 3 hr ot pt sinus surgery 6 weeks ago and was hitting the Solo straight in the door as soon as I got home. The secret was to draw slow and not a bit of extra bleeding or hemorrhaging but in terms of potential infections it was probably not a good idea.
Have you tried flushing your sinuses with Neti Pot or Neilmed? Flush sinus with saline and see if that helps.
WWW.neilmed.com page 3 for the cheap basic delivery system
(squeeze bottle) Good luck
Da Ape
As a side note I had a 3 hr ot pt sinus surgery 6 weeks ago and was hitting the Solo straight in the door as soon as I got home. The secret was to draw slow and not a bit of extra bleeding or hemorrhaging but in terms of potential infections it was probably not a good idea.
Have you tried flushing your sinuses with Neti Pot or Neilmed? Flush sinus with saline and see if that helps.
WWW.neilmed.com page 3 for the cheap basic delivery system
(squeeze bottle) Good luck
Da Ape
Vaped Ape
MMJ Therapist specializing in gynecology~wannabe
For you two fisted vapefucks (that's a term of endearment for FC dudes and dudettes) that have 2 Solos.
Don't ticket me MOD Max
Willeh will love it: http://www.planetvape.ca/glass-14mm-double-bowl-y-adapter.html
Da Ape
Don't ticket me MOD Max
Willeh will love it: http://www.planetvape.ca/glass-14mm-double-bowl-y-adapter.html
Da Ape
dorkus_molorkus
Well-Known Member
@ da ape- lol go hard or go home!
you can always try the gravity bong solo style, I promise it'll make yr face fall off!
you can always try the gravity bong solo style, I promise it'll make yr face fall off!
Vaped Ape
MMJ Therapist specializing in gynecology~wannabe
These newbies will be WTF-they're still fighting the dust cap . Maybe 2 Solos will equalize and prevent headaches as such. He ha. coming out of Canada so 4-5 day wait then time to adapt. Got to make some type of docking station to tie it all together without falling over-so much for portable. Who wants to bring the herb?
Da Ape
. Maybe 2 Solos will equalize and prevent headaches as such. He ha. coming out of Canada so 4-5 day wait then time to adapt. Got to make some type of docking station to tie it all together without falling over-so much for portable. Who wants to bring the herb?Da Ape
mari
Member
I noticed that there are 4 wires leading to the crucible: 2 for sensor and 2 for heating. They appear to be thinner than my fingerprint ridges.
When I apply power to the crucible, these wires get very hot. How much of the battery energy is getting wasted as heat into the case? it almost melted the plastic.
When I apply power to the crucible, these wires get very hot. How much of the battery energy is getting wasted as heat into the case? it almost melted the plastic.
Vaped Ape
MMJ Therapist specializing in gynecology~wannabe
^^Oh those are fingers 
Welcome I think that insulation right at the end of the visible wires may be breaking down and allowing the wire sheaths to heat and off gas. I would be careful putting it back together maybe so not to degrade the insulation any further. Mine is similar. Wish I had looked inside mine when it was new.
Da Ape
Welcome I think that insulation right at the end of the visible wires may be breaking down and allowing the wire sheaths to heat and off gas. I would be careful putting it back together maybe so not to degrade the insulation any further. Mine is similar. Wish I had looked inside mine when it was new.
Da Ape
tokinginger
Member
I meant the metal caps that came in the package, only I just realized it's a magnetic grinder. 
Bonus! I'll admit, I was looking at it in a rush, I had to go to class. About to try it...woo hoo!
Bonus! I'll admit, I was looking at it in a rush, I had to go to class. About to try it...woo hoo!
mari
Member
Vaped Ape said:
Thanks for the welcome . I have no problem with the insulation. My concern is that Arizer appears to have chosen power-wires thinner than appropriate for this application.
If the wires leading to the crucible are too thin, they will be getting hotter than thick wires would. Hot wires means that energy is getting wasted and not getting delivered to the crucible. This means shorter run-time on a particular pair of batteries
... but how much?
tokinginger
Member
Are my stems supposed to be loose in the bowl? I was watching this on YouTube
http://www.youtube.com/watch?v=W1lDD3cGZdc
And hers seems firm, but both of mine wiggle around. Also, it it normal to get bits in your mouth? I have a four hole set up and I keep getting bits of bud in my mouth. o.O I did not grind.
http://www.youtube.com/watch?v=W1lDD3cGZdc
And hers seems firm, but both of mine wiggle around. Also, it it normal to get bits in your mouth? I have a four hole set up and I keep getting bits of bud in my mouth. o.O I did not grind.
dorkus_molorkus
Well-Known Member
you have some reading to do-
the answer is behind door number- click on 'click here' at the bottom vvvvv of my siggy
the answer is behind door number- click on 'click here' at the bottom vvvvv of my siggy
Lostclusters
Well-Known Member
shadyonedeath said:
Do you use your Solo for multiple 12 minute sessions? Does the whole unit heat up and feel warm in your hand? You may be partially melting the plastic plate at the bottom of the bowl assembly (assuming you have one like the two of mine). There is not much room between it and the block that holds the heater/bowl. It gets warm in there. And it is in the air path. It is the next project of mine to replace that piece with something a little more heat resistant. I will try to contact the Arizer folks and find out what that is made of and how much heat it can resist from back to back 12 minute sessions.
I use mine, sometimes for multiple back to back sessions, with no side effects other than those associated getting medicated. My SS one gets more use now that the nasty flux smell and taste is gone.
OhTheAgony
here for the chicks
Vaped Ape said:
That looks pretty cool Ape, I may have to try that sometime, ha!