fangorn
Well-Known Member
I found a second hand with lot of accesories and with a carefull user.... So it's really better for my budget !
TinyMight / TM 2
- Thread starter kuzko
- Start date
I found a second hand with lot of accesories and with a carefull user.... So it's really better for my budget !
LabPong
Well-Known Member
It would be cool if the heater on led would be a different color.
I would like the main color led to be green or blue...then maybe red when heater is up to temp.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Imp stem is too narrow, will not fit
Being almost sure of that was what led me to buy TM as soon as it appeared here at FC ...
It was obvious that he was not going to make the same mistakes as in the past and with the knowledge acquired he would make a great vape ... and he did!
and the trend is to improve
... Congratulations Ville!
YaMon
Vaping since 2010
If you attempted wax in the TM, I would only do so with the TM inverted, otherwise you run the risk of impacting the units heater which is direct beneath your stem bowl.
Tweakz
Well-Known Member
Ok thanks
Last edited:
LabPong
Well-Known Member
Yes the Elev8r stock bowl with metal screen will work fine with the Tinymight.
Yes...as YaMon says.....keep it upside down.....like using an arizer with concentrates with the wpa.
You can do concentrates with the Tinymight....but it pushes it some...I use 8-10 power level with a 10mm healthstone (ceramic lava stone deal) in a RBT 18mm short stem.
Sensory Leaf
Well-Known Member
The stock tm stems are 16mm od, unless you mean using the elev8r bowl as an 18-14mm adapter in conjunction with a rbt stem, I don't see how you'd use it
Edit; your blue suede "wrap" looks really nice
Tweakz
Well-Known Member
Yes, that's what I wanted to hear. thank you.
excellent . I will try. my TM is already coming to me. I’ll write my feelings soon too.
Alex3oe
Accessory Maker
Yeah, allways use these kind of devices upside down with concentrates and pure hash too, otherwise you could damage the heater!
LabPong
Well-Known Member
lol.....it is actually black....just the lighting when I took those pics.
Yes, that is exactly what I mean using the Elev8r bowl as an adapter...you take the screen out and the 18mm RBT stem fits into the top of the Elev8r bowl which is a female 18mm joint.
I also use my G-43 with the elev8r bowl and screen setup instead of loading into the G43 slide and capping off with the basket screen. I do this because it is easy to stir and load and you get more taste.
How I use my Tinymight normally.
And my arizer go
And G43 (using a smaller adapter like the Elev8r bowl)
Siebter
Less soul, more mind
Oh cool, did you finally find a way? Great!
Tweakz
Well-Known Member
@Siebter Yes, we found a joint solution with the manufacturer.
and it’s great. it is even faster much than I expected. Ville (manufacturer) is a cool professional and
sociable
person. we reached a quick understanding.
so who else can’t pay by credit card, I advise you to write directly about your situation.
very soon, I will also enjoy it. I'm glad that wpa will come to him. I’ll write my assessment later.
thank you all and have a nice day
and it’s great. it is even faster much than I expected. Ville (manufacturer) is a cool professional and
sociable
person. we reached a quick understanding.
so who else can’t pay by credit card, I advise you to write directly about your situation.
very soon, I will also enjoy it. I'm glad that wpa will come to him. I’ll write my assessment later.
thank you all and have a nice day
fangorn
Well-Known Member
Likewise, before my previous posts on FC, I had written to the manufacturer. He did answer me this Monday morning.
He said there was no problem canceling my order. And for a warranty transfer, he told me he wanted to take care of all his units in the wild (not in these precise terms ...)
in short, positive feedback on my exchanges with this gentleman ...
good vape to you!
He said there was no problem canceling my order. And for a warranty transfer, he told me he wanted to take care of all his units in the wild (not in these precise terms ...)
in short, positive feedback on my exchanges with this gentleman ...
good vape to you!
Brewervapesalot
Well-Known Member
Had folks over and crushed Tiny Might.
This is two batteries worth of herb, used pretty casually between four people on on demand mode:
https://ibb.co/Jm6stpQ
The purple light comes on when you kill the battery. Battery works all the way down to 3 volts according to charger.
I didn't notice any change in performance until it shut off...
This is two batteries worth of herb, used pretty casually between four people on on demand mode:
https://ibb.co/Jm6stpQ
The purple light comes on when you kill the battery. Battery works all the way down to 3 volts according to charger.
I didn't notice any change in performance until it shut off...
vapeaveli420
Well-Known Member
What is that black tip the person is using on the glass stem?
Momor
Well-Known Member
Dynavap Fat Moutpiece (https://www.dynavap.com/dynashop/vaporizers-parts/fat-mouthpiece/)
vapeaveli420
Well-Known Member
Thank you!!
SquirrelMaster
Well-Known Member
I was going to keep this short, just like the shipping time from Finland to Canada, as this was sent on Friday! That's insanely fast shipping especially for the price. I had extra fees of $37 CDN~ which was GST and then a handling and processing fee ($16 extra) so be aware of that as I don't recall other Canadians getting hit (I was expecting it).
Upon first inspection the wood needed a good oil so I slathered it up with some Sticky Brick butter and left it to soak it all up (which it did). I tossed the VTC6 on my XTAR VP4 Dragon and it was sitting at a 70% charge which I let charge up while I had to run out.
From an initial look over my OCD thought it was a little rough around the edges. I'm not big on the aluminum top and bottom plate as I see the potential for damage, however really I like the look of the aluminum, just not the durability. My bottom plate has a few "manufacturing marks" (again, I'm OCD with LITTLE marks) but I did notice the screw sits flush and the dial protrudes so little it feels pretty stable standing up. I lay my vapes down anyways to be safe. I also quickly noticed some light bleed around the bottom edge and my god is that light bright when you flip it over if it hits you right! Vapecritic opened his up pretty easily if I remember correctly so I may put something in there to stop it. I would prefer it was disabled to be honest as I like to be stealthy. Also those little O-rings are going to be an issue if you don't have extras. I had to give them a little lick when I put the CU back in as one kept rolling so you just have to be careful. Also the firing button is loose so it clicks when you bump the unit.
Those are the only things cons I cask come up and they are pretty minor especially once I fired up the unit.
Before I get to that though I love the packaging. The little cloth bags are very nice, and the wooden instruction are awesome. There's a nice braided U-Green usb cord if you plan to charge your batteries in the device. I really like the stem and cooling unit set up. Very easy to take apart and if I'm an idiot and I lose a nut or washer, which I nearly did when I dropped one down the sink and had to fish it out with a magnet, I can replace them locally.
First bowl was loaded up with the CU exactly as pictured. I loaded up some Wedding Crasher at level 4~ for a couple draws then 6 for another couple and then 8. I was being very conscious of flavour and although its not Elev8r quality its just below. Definitely better than the Hybrid, Dynavaps, Tera V3. The CU does wonders. I stirred it a couple times IIRC.
Very nice, even AVB imo.
Well, I thought to myself, what happens when you load it up...
And then hit it three times on level 8 without stirring.
It is really hard to not be overly excited with those results. I continued with another 3 bowls the same size starting one at 3.8 which was terpy as hell with some nice gassy Death Bubba. I was jumping between 3.8-8 and I'm feeling very medicated right now which I needed. I can't believe how well it handles large loads. I still like to stir for maximum flavour but if I'm out and about I won't feel like I need to.
I'm going to have a great week.
Upon first inspection the wood needed a good oil so I slathered it up with some Sticky Brick butter and left it to soak it all up (which it did). I tossed the VTC6 on my XTAR VP4 Dragon and it was sitting at a 70% charge which I let charge up while I had to run out.
From an initial look over my OCD thought it was a little rough around the edges. I'm not big on the aluminum top and bottom plate as I see the potential for damage, however really I like the look of the aluminum, just not the durability. My bottom plate has a few "manufacturing marks" (again, I'm OCD with LITTLE marks) but I did notice the screw sits flush and the dial protrudes so little it feels pretty stable standing up. I lay my vapes down anyways to be safe. I also quickly noticed some light bleed around the bottom edge and my god is that light bright when you flip it over if it hits you right! Vapecritic opened his up pretty easily if I remember correctly so I may put something in there to stop it. I would prefer it was disabled to be honest as I like to be stealthy. Also those little O-rings are going to be an issue if you don't have extras. I had to give them a little lick when I put the CU back in as one kept rolling so you just have to be careful. Also the firing button is loose so it clicks when you bump the unit.
Those are the only things cons I cask come up and they are pretty minor especially once I fired up the unit.
Before I get to that though I love the packaging. The little cloth bags are very nice, and the wooden instruction are awesome. There's a nice braided U-Green usb cord if you plan to charge your batteries in the device. I really like the stem and cooling unit set up. Very easy to take apart and if I'm an idiot and I lose a nut or washer, which I nearly did when I dropped one down the sink and had to fish it out with a magnet, I can replace them locally.
First bowl was loaded up with the CU exactly as pictured. I loaded up some Wedding Crasher at level 4~ for a couple draws then 6 for another couple and then 8. I was being very conscious of flavour and although its not Elev8r quality its just below. Definitely better than the Hybrid, Dynavaps, Tera V3. The CU does wonders. I stirred it a couple times IIRC.
Very nice, even AVB imo.
Well, I thought to myself, what happens when you load it up...
And then hit it three times on level 8 without stirring.
It is really hard to not be overly excited with those results. I continued with another 3 bowls the same size starting one at 3.8 which was terpy as hell with some nice gassy Death Bubba. I was jumping between 3.8-8 and I'm feeling very medicated right now which I needed. I can't believe how well it handles large loads. I still like to stir for maximum flavour but if I'm out and about I won't feel like I need to.
I'm going to have a great week.
Siebter
Less soul, more mind
Whoa, never thought this would actually work. :-)
Great first impressions, thx!
Darr1
Well-Known Member
I was going to keep this short, just like the shipping time from Finland to Canada, as this was sent on Friday! That's insanely fast shipping especially for the price. I had extra fees of $37 CDN~ which was GST and then a handling and processing fee ($16 extra) so be aware of that as I don't recall other Canadians getting hit (I was expecting it).
Upon first inspection the wood needed a good oil so I slathered it up with some Sticky Brick butter and left it to soak it all up (which it did). I tossed the VTC6 on my XTAR VP4 Dragon and it was sitting at a 70% charge which I let charge up while I had to run out.
From an initial look over my OCD thought it was a little rough around the edges. I'm not big on the aluminum top and bottom plate as I see the potential for damage, however really I like the look of the aluminum, just not the durability. My bottom plate has a few "manufacturing marks" (again, I'm OCD with LITTLE marks) but I did notice the screw sits flush and the dial protrudes so little it feels pretty stable standing up. I lay my vapes down anyways to be safe. I also quickly noticed some light bleed around the bottom edge and my god is that light bright when you flip it over if it hits you right! Vapecritic opened his up pretty easily if I remember correctly so I may put something in there to stop it. I would prefer it was disabled to be honest as I like to be stealthy. Also those little O-rings are going to be an issue if you don't have extras. I had to give them a little lick when I put the CU back in as one kept rolling so you just have to be careful. Also the firing button is loose so it clicks when you bump the unit.
Those are the only things cons I cask come up and they are pretty minor especially once I fired up the unit.
Before I get to that though I love the packaging. The little cloth bags are very nice, and the wooden instruction are awesome. There's a nice braided U-Green usb cord if you plan to charge your batteries in the device. I really like the stem and cooling unit set up. Very easy to take apart and if I'm an idiot and I lose a nut or washer, which I nearly did when I dropped one down the sink and had to fish it out with a magnet, I can replace them locally.
First bowl was loaded up with the CU exactly as pictured. I loaded up some Wedding Crasher at level 4~ for a couple draws then 6 for another couple and then 8. I was being very conscious of flavour and although its not Elev8r quality its just below. Definitely better than the Hybrid, Dynavaps, Tera V3. The CU does wonders. I stirred it a couple times IIRC.
Very nice, even AVB imo.
Well, I thought to myself, what happens when you load it up...
And then hit it three times on level 8 without stirring.
It is really hard to not be overly excited with those rel
Hi @SquirrelMaster thanks for the first impressions can't wait to try mine . Do you mind me asking your order number just so I can guesstimate the arrival of mine (I'm #110)I was going to keep this short, just like the shipping time from Finland to Canada, as this was sent on Friday! That's insanely fast shipping especially for the price. I had extra fees of $37 CDN~ which was GST and then a handling and processing fee ($16 extra) so be aware of that as I don't recall other Canadians getting hit (I was expecting it).
Upon first inspection the wood needed a good oil so I slathered it up with some Sticky Brick butter and left it to soak it all up (which it did). I tossed the VTC6 on my XTAR VP4 Dragon and it was sitting at a 70% charge which I let charge up while I had to run out.
From an initial look over my OCD thought it was a little rough around the edges. I'm not big on the aluminum top and bottom plate as I see the potential for damage, however really I like the look of the aluminum, just not the durability. My bottom plate has a few "manufacturing marks" (again, I'm OCD with LITTLE marks) but I did notice the screw sits flush and the dial protrudes so little it feels pretty stable standing up. I lay my vapes down anyways to be safe. I also quickly noticed some light bleed around the bottom edge and my god is that light bright when you flip it over if it hits you right! Vapecritic opened his up pretty easily if I remember correctly so I may put something in there to stop it. I would prefer it was disabled to be honest as I like to be stealthy. Also those little O-rings are going to be an issue if you don't have extras. I had to give them a little lick when I put the CU back in as one kept rolling so you just have to be careful. Also the firing button is loose so it clicks when you bump the unit.
Those are the only things cons I cask come up and they are pretty minor especially once I fired up the unit.
Before I get to that though I love the packaging. The little cloth bags are very nice, and the wooden instruction are awesome. There's a nice braided U-Green usb cord if you plan to charge your batteries in the device. I really like the stem and cooling unit set up. Very easy to take apart and if I'm an idiot and I lose a nut or washer, which I nearly did when I dropped one down the sink and had to fish it out with a magnet, I can replace them locally.
First bowl was loaded up with the CU exactly as pictured. I loaded up some Wedding Crasher at level 4~ for a couple draws then 6 for another couple and then 8. I was being very conscious of flavour and although its not Elev8r quality its just below. Definitely better than the Hybrid, Dynavaps, Tera V3. The CU does wonders. I stirred it a couple times IIRC.
Very nice, even AVB imo.
Well, I thought to myself, what happens when you load it up...
And then hit it three times on level 8 without stirring.
It is really hard to not be overly excited with those results. I continued with another 3 bowls the same size starting one at 3.8 which was terpy as hell with some nice gassy Death Bubba. I was jumping between 3.8-8 and I'm feeling very medicated right now which I needed. I can't believe how well it handles large loads. I still like to stir for maximum flavour but if I'm out and about I won't feel like I need to.
I'm going to have a great week.
Thanks D
SquirrelMaster
Well-Known Member
Darr1
Well-Known Member
Thanks @SquirrelMaster , erm that's worrying but yea maybe by region I'm in the UK anyone else have any idea ??
Easywider
Simple is the way
This is correct, I can't remember if this has been discussed here or not but it has been confirmed in another forum. Different countries have different #'s. It may just be EU vs International's but there is a different # system.
Edit:
@SquirrelMaster great post!
I got the DHL fee's as well. How much would you say you have loaded .3 -.4? How was pack and draw speed? I'm going to have to try a "super load" myself today.
Last edited: