Multi-brand Flowermate CAP

ginolicious · Jan 29, 2020

I can’t seem to get my mouthpiece hot. Thank god. I’m good for two sessions in the same load in the evening and that’s it for me. Like how the bowl is a lot smaller than my nano.

just did a flavour comparison with my V5 nano. V5 nano provides better taste. Probably cause of glass mouth piece.

Ramahs · Jan 29, 2020

lookhigh said:
cap capped.

You don't have a problem with the magnetic mouthpiece coming off when you take the cap off of that end?

FLOWERMATE OFFICIAL · Jan 30, 2020

ginolicious said:
I can’t seem to get my mouthpiece hot. Thank god. I’m good for two sessions in the same load in the evening and that’s it for me. Like how the bowl is a lot smaller than my nano.

just did a flavour comparison with my V5 nano. V5 nano provides better taste. Probably cause of glass mouth piece.

Hi, it seems people like glass mouthpiece more, so our next new generation will consider Glass. thanks

Br,

Phoebe

lookhigh said:
cap capped.

Is it silicone cap?

Dutch-Mic · Jan 30, 2020

@FLOWERMATE OFFICIAL to be sure: are we allowed to post pictures of the Cap on social media?

FLOWERMATE OFFICIAL · Jan 30, 2020

Dutch-Mic said:
@FLOWERMATE OFFICIAL to be sure: are we allowed to post pictures of the Cap on social media?

yes, its allowed

ginolicious · Jan 30, 2020

I do like the design of the mouthpiece that’s for sure. Just if it could be glass would offer a more pure taste but keep the style similar I guess instead of being like a straw if possible. I do like the design of the mouthpiece just not the material to be clear.

lookhigh · Jan 30, 2020

Ramahs said:
You don't have a problem with the magnetic mouthpiece coming off when you take the cap off of that end?

Little bit. I squeeze the cap a bit and it slides off.
Can switch it on without any smell emanating.

FLOWERMATE OFFICIAL said:
Is it silicone cap?

High temp vinyl i think.

Alex3oe · Jan 30, 2020

A glass mouth piece with this spiral would be the killer. But I think this would push up building costs through the roof

chlorophyll_man · Jan 30, 2020

I'm not so bothered about glass in a conduction vape given they're not the best flavour vapes anyway. If the ceramic is tougher I'd prefer that in a cheap out-and-about portable.

Btw, be careful when you're cleaning the mouthpiece because that tiny spiral is really easy to lose, trust me!

stickstones · Jan 30, 2020

glass might get hotter

ginolicious · Jan 30, 2020

So I took out my spiral piece. Noticed it gets gunked up. I hit a bowl without it. I think I found better flavour. Vapour isn’t that much hotter without it. Seems like the piece isn’t needed to be honest.

Ramahs · Jan 31, 2020

stickstones said:
glass might get hotter

That was exactly my first thought.

Maybe glass that is lined on the outside with a layer of silicon that is bonded to the glass?

Though, I'd much rather anything but sticky silicone on my lips.

If you could make a multi-layer mouthpiece...

jardri · Jan 31, 2020

I think zirconia has a very neutral taste. In my opinion glass would add a lot of inconveniences, extra costs and little advantages.

The spiral inside the mouthpiece is indeed a pita to clean. Also, heat dissipation goes down real quick once it gets coated with resin.

I have found that @Abysmal Vapor did a great modification on page 7 of this thread and this device works best for me that way. Sometimes less is more.

Maybe @FLOWERMATE OFFICIAL could make a Cap v2 with an improved cap and reaching 220ºC while still mantaining this price point, it would be a masterpiece!!

FLOWERMATE OFFICIAL · Jan 31, 2020

jardri said:
I think zirconia has a very neutral taste. In my opinion glass would add a lot of inconveniences, extra costs and little advantages.

The spiral inside the mouthpiece is indeed a pita to clean. Also, heat dissipation goes down real quick once it gets coated with resin.

I have found that @Abysmal Vapor did a great modification on page 7 of this thread and this device works best for me that way. Sometimes less is more.

Maybe @FLOWERMATE OFFICIAL could make a Cap v2 with an improved cap and reaching 220ºC while still mantaining this price point, it would be a masterpiece!!

Hey, you mean improved cap is the mouthpiece? some users told us that don't set high temperature, cuz too high temp easy to burn the flowers.

TommyDee · Jan 31, 2020

The Flowermate CAP does very well in design of the mouthpiece both with regard to materials and somewhat in effectiveness from user reviews. Contact with the zirconium mouthpiece can give a hot reply. The cooling spiral appears to be effective when clean but easily gets coated with vape and does not draw the heat away using mass. However, the spiral piece does increase the path-length and that is only good. I can only glean from comments but I did review the design earlier. Many have also appreciated the unit for what it is. I would not change the zirconium parts. The only improvement I can see is a rubber bio-barrier between the mouthpiece plastic and zirconium. That may also help with accidental contact between the lip and a hot zirconium mouthpiece.

jardri · Feb 1, 2020

FLOWERMATE OFFICIAL said:
Hey, you mean improved cap is the mouthpiece? some users told us that don't set high temperature, cuz too high temp easy to burn the flowers.

Yes I mean the mouthpiece. Excuse my english, i am spanish and sometimes I say weird things.

Some people dont like high temp but let the user decide. If the herbs are weak you need more temperature or orherwise it wont extract the goodies.

About the mouthpiece I think vapor is cool enough for my lungs but I burn my lips. You achieved the most difficult part that is delivering smooth pleasant vapor with a short airpath so this problem should be easy peasy for your skilled engineers!

ginolicious · Feb 1, 2020

After thorough use of this device and mouth piece I do enjoy it. I don’t have issue with it. Or flavour really. It’s not perfect. But it’s impossible to get perfect for a good price point.

Alex3oe · Feb 1, 2020

Tried the mouth piece hack, flipped the silicon piece, but was in a hurry and couldn't find a small screen, so I simply put the original screen on top of the load.
Surprisingly I feel you could use the CAP without the spiral. Vape is cool enough, taste improved and clouds bigger. Helped me getting through a damn sad funeral today.

FLOWERMATE OFFICIAL · Feb 2, 2020

@all

I think you guys known that China is facing Corona-Virus right now. Whole country citizens are all stay home till 10th Feb. Actually everything under control and getting better, please trust Chinese government and people. by the way the 1000pcs sleeping bed hospital was built already only in 10days, Thousand of military medical team went to Wuhan to help patients,

Regarding our production facility, all Flowermate products are producing in complete dust-free workshop. And we clear each spot of production line with medicinal alcohol everyday, plus temperature detection for each operator, so the Virus won't infect anyone by products.

Br,

Phoebe

Jill NYC · Feb 3, 2020

Thanks for the info Phoebe. Obviously it is huge news throughout the world.
Appreciate your update on the matter.

We are wishing you all the best and that this outbreak will subside quickly. Stay safe.

TheThriftDrifter · Feb 3, 2020

I second what @Jill NYC said. Stay safe indeed.

FLOWERMATE OFFICIAL · Feb 4, 2020

Jill NYC said:
Thanks for the info Phoebe. Obviously it is huge news throughout the world.
Appreciate your update on the matter.

We are wishing you all the best and that this outbreak will subside quickly. Stay safe.

TheThriftDrifter said:
I second what @Jill NYC said. Stay safe indeed.

Thank you guys

Stonedbadger · Feb 4, 2020

Yep this is a pretty good little vape, its small size and ease of use are big pluses for a lot of my friends.

ginolicious · Feb 4, 2020

I have to remember to charge it nightly. I have had it die on me twice now. I also did my first clean from use. No complaints. Very easy.

blackstone · Feb 4, 2020

ginolicious said:
I have to remember to charge it nightly. I have had it die on me twice now. I also did my first clean from use. No complaints. Very easy.

How about a plug in timer that switches the adapter on every night for 1 to 3 hours when the vape is cool? You only have to remember to plug in the usb each night!
On some surfaces a loud vibrating vape can wake you when you do this though.

Multi-brand Flowermate CAP

Well-Known Member

Fucking Combustion (mostly) Since February 2017

Company Rep

Well-Known Member

Company Rep

Well-Known Member

FC member

Accessory Maker

AVB Inspector

Vapor concierge

Well-Known Member

Fucking Combustion (mostly) Since February 2017

Vapor Dreams

Company Rep

Vaporitor

Vapor Dreams

Well-Known Member

Accessory Maker

Company Rep

Portable Hoarder

Land of the long vapor cloud

Company Rep

Well-Known Member

Well-Known Member

Well-Known Member