Discontinued The RBT Milaana (unregulated single 18650)

Status
Not open for further replies.

Alex3oe

Accessory Maker
Hello gentlemen

I recently broke my Milaana´s cooling stem. I live in europe and buying spares is incredibly expensive. Is there anyone in dhgate or aliexpress selling appropiate-fit stems?

If you would need only one of the standard short stems coming with Milaanas/Splinters I could send you one for shipping costs only. Have some lying around and don't use em :)
 

jardri

Vapor Dreams
If you would need only one of the standard short stems coming with Milaanas/Splinters I could send you one for shipping costs only. Have some lying around and don't use em :)

Thank you for your kind offer @Alex3oe !! Fortunately I have the OG colored stem and a wooden Ed´s Tnt one but I find them hot and harsh. Please keep them for someone who really needs it.

I had a Vapefiend cooling stem that worked wonders until it broke. Then bought 3 more and they broke too, they are just too damn fragile. I didn´t even drop them, just the heat/cold cycles broke them. I have a Stempod and I use an herborizer sphere suction tube which is the best stem I have found for this kind of vapes. I even dropped it 3 feet and it survived with a minor scratch but it doesn´t fit well in my Milaana.

I would like to find something similar for the Milaana if what I seek exists.

PD: Ryan why didn´t you use standard joints?? We the europeans are having a bad time seeking for stems!!
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Thank you for your kind offer @Alex3oe !! Fortunately I have the OG colored stem and a wooden Ed´s Tnt one but I find them hot and harsh. Please keep them for someone who really needs it.

I had a Vapefiend cooling stem that worked wonders until it broke. Then bought 3 more and they broke too, they are just too damn fragile. I didn´t even drop them, just the heat/cold cycles broke them. I have a Stempod and I use an herborizer sphere suction tube which is the best stem I have found for this kind of vapes. I even dropped it 3 feet and it survived with a minor scratch but it doesn´t fit well in my Milaana.

I would like to find something similar for the Milaana if what I seek exists.

PD: Ryan why didn´t you use standard joints?? We the europeans are having a bad time seeking for stems!!

The Milaana actually is standard, 18.8/22mm, there just happens to be another standard that is 18.8/26mm, is all.

Check out Tubo Nub Cooler stem at lamart.ch it is sized to fit the 22mm standard length so it will fit the Milaana.

Other folks here are selling their own cooling stem options now as well btw.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Screenshot-20191204-125605.png


Check it out! Lamart.com is now selling these narrow-tipped bent cooling stems the are size 19/22 like their nub cooler so it will fit the Milaana. Glass bent stems for RBT finally!!
 

DDave

Vape Wizard
Accessory Maker
Tha DDave cooling stem is amazing ... I'll be buyin a 2nd one as a back up ...
Thanks Friend!
Just released a new model. Uses the custom rimmed basket screens I offer, plus it's modular so it can be used on many different portables and even on desktop vaporizers by 14mm whip adapter.

The stems that come with the unit can also be used natively, without the cooler.

RBT.jpg
 

Vapster707

Well-Known Member
Thanks Friend!
Just released a new model. Uses the custom rimmed basket screens I offer, plus it's modular so it can be used on many different portables and even on desktop vaporizers by 14mm whip adapter.

The stems that come with the unit can also be used natively, without the cooler.

RBT.jpg

Nice I didn't see it listed ... Also I had a question about tha cooling stem and tha limited cooling stem ... What's tha difference ??? Tha OG fits my OG milanna .... Would tha limited also fit ???
 
Vapster707,
  • Like
Reactions: DDave

sickmanfraud

Well-Known Member
The Milaana actually is standard, 18.8/22mm, there just happens to be another standard that is 18.8/26mm, is all.

Check out Tubo Nub Cooler stem at lamart.ch it is sized to fit the 22mm standard length so it will fit the Milaana.

Other folks here are selling their own cooling stem options now as well btw.

Yesterday while cleaning one of my Nub stems it slipped out of my hand (darn you PBW) onto a granite counter. RIP little nub.

Within a few minutes, I had already ordered 2 more from @funkyjunky.

Understand that I have just about every cooling stem available in 18 mm and I could not "rest" until I made sure I had spare (s) Nubs.
 

DDave

Vape Wizard
Accessory Maker
Nice I didn't see it listed ... Also I had a question about tha cooling stem and tha limited cooling stem ... What's tha difference ??? Tha OG fits my OG milanna .... Would tha limited also fit ???
Thanks!

The modular cooling stem is listed here. The Limited Edition 18mm Male here.

Both use Rimmed basket screens.

Regarding OG vs. Limited... OG used rimless basket screens and a screen install tool. The Limited uses rimmed basket screens. (as does the Modular cooling stem).
 
DDave,

jbm

Well-Known Member
Thanks!

The modular cooling stem is listed here. The Limited Edition 18mm Male here.

Both use Rimmed basket screens.

Regarding OG vs. Limited... OG used rimless basket screens and a screen install tool. The Limited uses rimmed basket screens. (as does the Modular cooling stem).

i can fit rimmed screens into my OG.
 
jbm,
  • Like
Reactions: DDave

kadjo

Well-Known Member
All this talk of stems I have to ask. First time posting, long time lurker. Great community at fc!


I have several rbt stems from new and older models which have gotten mixed up.

Is there a standardized table with rbt year/model/stem size and a way to measure?

I've read that using the wrong stem can be bad news. Ive been using the same stems for over a year and a half.

Thanks in advance for your help.
 
kadjo,

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
All this talk of stems I have to ask. First time posting, long time lurker. Great community at fc!


I have several rbt stems from new and older models which have gotten mixed up.

Is there a standardized table with rbt year/model/stem size and a way to measure?

I've read that using the wrong stem can be bad news. Ive been using the same stems for over a year and a half.

Thanks in advance for your help.

Shouldn't be a problem, check the fits, all RBT is 22mm joint length despite potential variance, only regular Splinters are 19mm joint length and you will see how the stem won't fit properly if you try, or just compare the joint lengths across your various stems...Which vapes do you have?
 
Shit Snacks,

kadjo

Well-Known Member
Shouldn't be a problem, check the fits, all RBT is 22mm joint length despite potential variance, only regular Splinters are 19mm joint length and you will see how the stem won't fit properly if you try, or just compare the joint lengths across your various stems...Which vapes do you have?


I have 2 og Milanna 1s, 1 og mi2, an orginal splinter, an original splinter z, a splinter v1, and splinter z v1.

Ingot a lot of bonus stems (thanks Ryan!) Niw I gotta figure out which is which. I'll try your technique. Thanks for responding.

Much appreciated
 
kadjo,

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I have 2 og Milanna 1s, 1 og mi2, an orginal splinter, an original splinter z, a splinter v1, and splinter z v1.

Ingot a lot of bonus stems (thanks Ryan!) Niw I gotta figure out which is which. I'll try your technique. Thanks for responding.

Much appreciated

Yeah glass variance means best way is to test, carefully, and compare to other stems that you know fit well. Biggest variance will be the regular SplinterV1 which should only be 19mm length, so don't risk using stems with joints that seem longer even if they seem to fit in that one at least... The rest should be fine, less risk (except your OG Splinter, depending when it was made it could be 22mm length or it could be the 19mm)
 
Shit Snacks,

kadjo

Well-Known Member
Yeah glass variance means best way is to test, carefully, and compare to other stems that you know fit well. Biggest variance will be the regular SplinterV1 which should only be 19mm length, so don't risk using stems with joints that seem longer even if they seem to fit in that one at least... The rest should be fine, less risk (except your OG Splinter, depending when it was made it could be 22mm length or it could be the 19mm)


Thank you! I'm gonna sort them ASAP. Trying to figure out the best way to keep the ever growing collection organized. So many parts! Fyi ,Shit Snacks, for what it's worth the image I always associate with fc is your pam profile pic and tag line. I really appreciate your help. Your early posts convinced me it was worth pursuing rbt and sparking my VAS!
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Thank you! I'm gonna sort them ASAP. Trying to figure out the best way to keep the ever growing collection organized. So many parts! Fyi ,Shit Snacks, for what it's worth the image I always associate with fc is your pam profile pic and tag line. I really appreciate your help. Your early posts convinced me it was worth pursuing rbt and sparking my VAS!

Thanks for the kind words! It is nice to have helped others the way I was helped by members here when I began (and associated FC with avatars like ataxian's old Bender with the sunglasses, maybe that's what inspired me lol) When the prototype was named Milaana I knew I had to update my signature, and really how could I ever change it?! Love the FC community!

It has now been over four years since the RBT journey began for me with my OG Zion beta, and almost 4 years since I tested the first official Milaana beta (that was Ryan's own unit originally --it even oversaw my move across the country to California-- now it is a true relic) They all really changed the game for me as a top tier vapor experience. I have too many vapes and stems etc. but I still use RBT ones the most probably!
 
Status
Not open for further replies.
Top Bottom