Dynavap VapCap

RogueGuy · Nov 28, 2019

Thanks @Xclerk I knew there was something I was supposed to do but after hitting the Dynacoil, I forgot.

https://www.instagram.com/theroguewaxworks/

JacoboP · Nov 28, 2019

What about a vape cap size car lighter port remember the car lighter you push in then it popped out red hot what about a smaller version to pop a vapcap into and pop out when the click hits I'm not a electrical person but was wondering if this would work somehow

GoldenBud · Nov 28, 2019

JacoboP said:
What about a vape cap size car lighter port remember the car lighter you push in then it popped out red hot what about a smaller version to pop a vapcap into and pop out when the click hits I'm not a electrical person but was wondering if this would work somehow

heating the flat part of the cap isn't recommended because the click mechanism is set on this part.. so if you can just heat the cap from its sides, it will work

TommyDee · Nov 28, 2019

JacoboP said:
What about a vape cap size car lighter port remember the car lighter you push in then it popped out red hot what about a smaller version to pop a vapcap into and pop out when the click hits I'm not a electrical person but was wondering if this would work somehow

Oh Snap! I need to look into that for a heat source. If the heater material is kosher, sure, why not. I'd say it is enough of a heat load to get a nice hit by using a glass 'funnel' and no cap. Just huff the heat straight to the herb. It doesn't even need to heat up the bowl. "Now where did I stash that old popcorn maker..."

Ramahs · Nov 28, 2019

TommyDee said:
no cap. Just huff the heat straight to the herb. It doesn't even need to heat up the bowl.

You just described a Woodscents log.

TommyDee · Nov 28, 2019

...small world :rolleyes:

stark1 · Nov 28, 2019

Full convection. Damn the torpedos :cheers:

JacoboP · Nov 29, 2019

GoldenBud said:
heating the flat part of the cap isn't recommended because the click mechanism is set on this part.. so if you can just heat the cap from its sides, it will work

So maybe just extend the contact point from a 12 v soxket to the sides of the walls to complete the circuit on the sides of the cap when inserted

TommyDee said:
Oh Snap! I need to look into that for a heat source. If the heater material is kosher, sure, why not. I'd say it is enough of a heat load to get a nice hit by using a glass 'funnel' and no cap. Just huff the heat straight to the herb. It doesn't even need to heat up the bowl. "Now where did I stash that old popcorn maker..."

I once use to use the car lighter on top of a deep bubbler bowl and would get insanely ripped I believe it's nichrome wire

GoldenBud · Nov 29, 2019

JacoboP said:
So maybe just extend the contact point from a 12 v soxket to the sides of the walls to complete the circuit on the sides of the cap when inserted

Yea, but you'll have to make sure the plastic from the outside won't be melted or so. If you live in the US/CA (low shipping price purposes), I suggest you check some Induction Heater option (12V)
The one which sold by Pipes and received good reviews is 12V all the way, no need to voltage change

stark1 · Nov 29, 2019

Good to know, Pipes sells a 12V car plug with his Caldron?

Hey. You changed your posting., Bud.

GoldenBud · Nov 29, 2019

stark1 said:
Good to know, Pipes sells a 12V car plug with his Caldron?

Yes, check out here, just need the 12v car cable (10$):
https://docs.google.com/document/d/1_202eBzWeF7rkTjqV5sWumPxtbSNtfjqOZEs1i9d16k/edit

stark1 · Nov 29, 2019

Meh.
Buy it locally (double saw bux shipping from Canada).

Of course have been meaning to get a Cauldron, but having a couple Minis, I have been dragon
My butt.

swieder711 · Nov 29, 2019

GoldenBud said:
Yes, check out here, just need the 12v car cable (10$):
https://docs.google.com/document/d/1_202eBzWeF7rkTjqV5sWumPxtbSNtfjqOZEs1i9d16k/edit

Does any know the specs of the car adapter that can be used with the Caldron? What is the output current?

Here is one on eBay, but it is only rated for 2 amp
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/112151063361

stark1 · Nov 29, 2019

According to Pipes (enlarged) specs, 12V, 1000 mA

CanadianBakin · Nov 29, 2019

That's a charger, not a power supply.

There was some discussion about power supplies for the Caldron here and @Pipes reply is in the next post. TLDR - The Caldron draws 5-6 amps, which is pushing the limits of the lighter plug.

http://fuckcombustion.com/threads/v...op-and-in-car-use.23211/page-116#post-1385886

doug@futo · Nov 29, 2019

Ramahs said:
Oohh. That's tempting. I've been wanting one for some time!

Hey thanks, so if you're still looking we're running everything on our site on sale for the weekend including all the new stashes. I stayed up late and released a couple dozen new pieces for the weekend including new galaxy burl stashes and our new JavaStash made from coffee beans. posted some details in our thread http://fuckcombustion.com/threads/futostash-for-dynavap.33750/page-2#post-1428558

thejackalsmark · Nov 29, 2019

CanadianBakin said:
That's a charger, not a power supply.

There was some discussion about power supplies for the Caldron here and @Pipes reply is in the next post. TLDR - The Caldron draws 5-6 amps, which is pushing the limits of the lighter plug.

http://fuckcombustion.com/threads/v...op-and-in-car-use.23211/page-116#post-1385886

Yeah, and I DON'T think that's changed.
I specifically remember him once recommending NOT to plug in from a car plug. :tup:

Happy Vaping! :leaf:

TommyDee · Nov 29, 2019

Car lighter connections were fused at 20 amps at one time. I'm pretty sure they still are. Most IH's require about 5-6 amps for a VC Since car batteries tend to run high, say 13.8V, the current requirement will increase a bit over a home unit.

Rasputin · Nov 29, 2019

For the low low price of $6.38 USD, you too can be a proud new owner of Dynavap's most recent offering- a hunk of wood. Complete with predrilled air port and tip holes! #innovation

NizzyJones · Nov 29, 2019

Hello VapCappas, playing the BB9 I found it fits the glass adapter for the Edge. Forgot to cover the airport for a minute and was thinking, "what the hell, that's leaking a ton of air somehow" before I got it hitting right. :lol:

https://www.instagram.com/p/B5dYvKeH2aV/?utm_source=ig_web_copy_link

cybrguy · Nov 29, 2019

So, the new website appears to have lost my previous order history. It's not a big deal really, I was just gonna try and calculate my current investment in Dynavap. I'm probably better off (or they are) not knowing. :rolleyes:

Milo · Nov 29, 2019

Sneaky Pete is having their Black Friday sale and they had ten Apollo 2 induction heaters for $55 each that included an M that sold out in under a minute. No surprise there. Anyone get one?

ElPic · Nov 29, 2019

Milo said:
Sneaky Pete is having their Black Friday sale and they had ten Apollo 2 induction heaters for $55 each that included an M that sold out in under a minute. No surprise there. Anyone get one?

It was in my cart, I apply the coupon code, I chose my shipping option, and when I try to chose my paiement option, the site told me Sorry, Sold Out!! :mad:

It was such a Good deal! :cry:

triskelion · Nov 29, 2019

Sneaky Pete is just playing with fire.

Schlumples · Nov 29, 2019

triskelion said:
Sneaky Pete is just playing with fire.

Bein' Sneaky :lol:

Dynavap VapCap

Well-Known Member

New Member

Well-Known Member

Vaporitor

Fucking Combustion (mostly) Since February 2017

Vaporitor

Lonesome Planet

New Member

Well-Known Member

Lonesome Planet

Well-Known Member

Lonesome Planet

Well-Known Member

Lonesome Planet

Well-Known Member

Owner @ Futo

Just another "Person Of Interest"

Vaporitor

Bobcat @ VLife. Le__Bobcat @ IG

Well-Known Member

Putin is a War Criminal

Well-Known Member

Take my money

Member

Resident Otter