TinyMight / TM 2

Facticity

Facticity

Well-Known Member
darbarikanada said:
from the little I've seen as far as video, this thing can deliver huge hits. combine that with the fact that in on-demand it's all convection, it'd be pretty impressive if the ABV wasn't dark and at least somewhat uneven, esp. w/out stirring. I'll be curious to hear reviews that talk about the different temperature settings - it seems like most of the early adopters are opting for big hits/high temps, finishing loads in 2-3 hits. I don't think I've seen anyone reporting back on starting low, working up.

or did I miss something?
Click to expand...

I do enjoy vaping at mid-range temps, just for a clearheaded high. So I decided to do some research tonight - here's a comparison of temp stepping the TM vs Omnivap with induction heater: https://i.imgur.com/ReTFzKO.jpg
Left: 0.95g (my average bowl size) in the Tinymite - temp stepping 4-5-6
Right: 0.8g in the Omnivap with induction heater and low temp - 3 heat cycles

Honestly, not a bad roast on the TM, considering the Dynavap benefits from a decent amount of conduction.
 
Siebter

Siebter

Less soul, more mind
biohacker said:
Well from the usage vid the ABV looks way too "roasty" as it was described, and uneven, but that's perhaps because 7 was too hot. But i'm fussy about taste, as if I detect burning starches/sugars/chlorophyll it ruins the experience for me.
Click to expand...

I don't quite understand the sugar... a chlorophyllic taste is mostly caused by drying herb too fast after harvesting, both aspects are not something a vaporizer can do much about. I might be misunderstanding something here.

khelek41girls usage video was uploaded mainly because of the high demand of the community for info, it does not aim for studio quality and may suffer a bit esp. when it comes to detailed illustration, so for example the contrasts may be more pronounced than in real life.

Any vaporizer can cook the herb unevenly, it's a matter of heating, pack, amount, grind etc. I got some slight unevenness with my first sessions and even that (to me) was neglectable. Meanwhile I've found my perfect pack and usage for both microdoses and bigger amounts, so those small spots of green don't really occur anymore, even though I don't stir.

I recommend the Tinymight (by the way @all: it's *not* written TinyMight :-) ) especially for people who are fussy about taste. I have yet to experience a hit that I'd consider to be „popcorny“, and I don't think this device is even capable of producing a burnt taste. I'd like to quote Zuhdjs comment on that matter because it's exactly what I experience:

Zuhdj said:
I extracted the whole bowl in just 2 hits. No combustion. I'm on hit 8 of temp stepping my second bowl and wow the vapor is potent. And I barely feel it while pulling. It's almost hard to gauge how large your hit will be.
Click to expand...

So true.

Edit: Since a lot of attention has been focused on the hard hitting and fast extraction qualities of the Tinymight, I'd like to point out that it also works well on lower temps, which lets you stretch a session nicely if you prefer that. While the clouds will be smaller, the vapor quality remains to be the same. I just did a .075g session on temp setting 5.5 (instead of my usual 7-7.5) and got 5-6 small, but lovely tasting clouds. ABV turned out to be 100% even (medium to coarse grind here). Effects just hit me oh so nicely. And how the fuck is this device able to stretch the flavor of herb so well without even a hint of toasted darkness? I don't know.
 
Last edited:
Baron23

Baron23

Well-Known Member
Vaporific said:
Thanks. Does she have her own site though? I didn’t see that on Page 12. No, I haven’t seen a video of this, only pics on https://tinymightvape.com/ and here. Is this site hers or the direct manufacturer’s? This could be a perfectly wonderful and awesome vape for me. :peace:
Click to expand...
https://www.kgwoodcrafts.com/

I'm pretty sure its in the thread somewhere but would be nice if she added it to her profile page or something, yeah?

Also, wrt to constant product improvement...that is, that the device is still being improved.....that approach seems to be applauded when it comes to New Vape who also do not version control in particular and will cut in changes as needed. As do many other vape companies.

Not sure why this would be controversial with this vape?
 
B

Brewervapesalot

Well-Known Member
Just read this thread. I still cant figure out what anyone is legitimately complaining about....

Looks like a solidly constructed portable vape that, from the video, cranks clouds quickly. The screw open battery compartment looks super durable and the analog dial control I personally applaud.

It's not an all glass path, but so what. Many vapes are not. The stainless cooling assembly seems unique in design, and looks fine to me.

Basically, I'd love to try this vape.

Edit: this thing pushed enough of the right buttons for me that I am order #61. Lol. Pretty impulsive, but we'll see!:shrug::lol::D

Edit #2: https://m.imgur.com/q3qi3gU

Looks great, nuts and bolts and all !:tup:
 
Last edited:
Vaporific

Vaporific

All who wander are not lost...
There’s no magnetic cap, correct? I didn’t see on on the retail site. The video, specs and postd herein early on really have me intrigued about this vape. While this likely won’t be available for Black Friday sales, I’m buying a new vape by then and this has made my short list and checks off many boxes... :peace:
 
Facticity

Facticity

Well-Known Member
If you aren't getting evenly roasted herb, try placing the cup screen in front of the cooling unit (closer to the heater within the tube). I think having the stainless steel mesh against the back of the herb makes it heat more evenly by keeping it off the cooling unit. This has given me the best results so far.

Edit: With this same logic, using the Mistvape dosing capsules will likely increase efficiency and evenness of roast. In @khelek41girl 's video, using the capsule seemed to create a nice, even AVB. Will try and report back.

Overall, this thing is great. Lasts around 10 chambers for me with varying length of sessions.
 
Last edited:
Zuhdj

Zuhdj

Charles Mingus
I've used mine exclusively since i got it. I wanted to see if i would miss anything from the crafty or dyna or grasshopper or sbj. The crafty is definatly my preference for long 20ish min sessions and i like the dyna because it's fun. But also i prefer it for microdosing. But the tinymight completely replaced the function of my grasshopper. It just does the grasshoppers job better and more pleasantly. And I'm going back and forth between this and the sbj for the "getting ripped" vape. {5}

Tldr: This vape can do the function of all of my other vapes. But imo it can only really take the place of my sbj and grasshopper. I have a ghost coming in next week so I'll be comparing it to that too.
 
B

Brewervapesalot

Well-Known Member
Zuhdj said:
I've used mine exclusively since i got it. I wanted to see if i would miss anything from the crafty or dyna or grasshopper or sbj. The crafty is definatly my preference for long 20ish min sessions and i like the dyna because it's fun. But also i prefer it for microdosing. But the tinymight completely replaced the function of my grasshopper. It just does the grasshoppers job better and more pleasantly. And I'm going back and forth between this and the sbj for the "getting ripped" vape. {5}

Tldr: This vape can do the function of all of my other vapes. But imo it can only really take the place of my sbj and grasshopper. I have a ghost coming in next week so I'll be comparing it to that too.
Click to expand...

I haven't used thing yet, but I'm familiar with the design and using vapes like it. I also have owned the MV1. My bet is that the simplicity of this thing will win out over the MV1.

I really want see your comparison of the vapor temperature, quality, and cloud size.
 
B

Brewervapesalot

Well-Known Member
Zuhdj said:
Idk about different glass stems. I'm probably going to get this for mine

https://www.sneakypetestore.com/col...cts/the-master-adapter?variant=23564648153169
Click to expand...

Someone said Milaana glass pieces fit? On milaana website, it has mouthpieces with 19mm gong joint, looks like anyway. Will the milaana 19mm gong mouthpiece work with 18 mm gong joints?

18, 18.8, 19 mm gong joints etc., are all pretty intenchangable?

Edit: https://www.rastabuddhatao.com/product-p/smpsm.htm

Fit this vape? Fit a 18 mil gong joint? Didnt I see a post like this already?
 
Last edited:
Shit Snacks

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Brewervapesalot said:
Someone said Milaana glass pieces fit? On milaana website, it has mouthpieces with 19mm gong joint, looks like anyway. Will the milaana 19mm gong mouthpiece work with 18 mm gong joints?

18, 18.8, 19 mm gong joints etc., are all pretty intenchangable?

Edit: https://www.rastabuddhatao.com/product-p/smpsm.htm

Fit this vape? Fit a 18 mil gong joint? Didnt I see a post like this already?
Click to expand...

Yes 18=18.8=19mm, the variance is joint length
 
Nano-Doser

Nano-Doser

Well-Known Member
Can any of the guys that have already picked one of these up comment about the vapour warmth and harshness in relation to other vapes? For example how does the vapour compare to a solo 2 with standard stem and the mighty? I've read that the vapour is surprisingly cool and not harsh, but without context that could mean anything. I'm really keen to pick one up but really don't want to be irritating my mouth with uncomfortable vapour. I'm sure the vapour can't be as fluffy and cool as the mighty (unless that little cooling unit works like magic) also, has anyone cleaned the cooling unit yet? I'm wondering how much of a bitch that is going to be? Can it just be dunked in iso? Or is it a requirement to disassemble the unit and clean it? Any info would be awesome! Cheers
 
M

mephisto

Well-Known Member
Using the short stem and 6.5 setting I feel zero heat at all. That can be misleading as it tends to lead to
over hitting......The coughing fit that I caught yesterday on some super dry Hemp was unexpected. I totally blame it on the cooling unit and effective delivery of the TM. I have not cleaned the cooling unit, and I probably will not until condensed resin gets delivered to my face, or I cannot draw through the device.
 
You must log in or register to reply here.
Top Bottom