• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Healthy Rips FURY EDGE

Jealousy

Well-Known Member
You're welcome, but I still think you're fighting an uphill battle. The MP and accessory attachment from EDGE will not work with F2 as I said above. They are about half an inch 'taller' than F2 so won't latch on F2.

Your call.

OF

Oh, I had the impression that the mp/aa were the same size as the Fury2. Thank you for the info! Thats too bad then, I like the Fury2 and the attachment- mouthpiece would be nice like in the potv one.
 

bossman

Gentleman Of Leisure
...got my 3D flow stems from healthy rips...work much better than the shipped ones..(imo).’have both f2 and fierce (which I love)....the stems are similar in functionality to the rbt cooling stems..
Super cool. I've been holding off on the Edge but it's great to hear about the cooling stem magic because that's part of why I use my Splinters more than any other portable.
 

OF

Well-Known Member
So will they now stop production on the F2, with the Edge being the replacement or will they both be in the product line? Apologies if I missed that in the thread somewhere.

I don't believe it's been discussed. My take is 'as long as sales are good, they will continue'. You can still buy Soio I, years after the 'better' Solo II was introduced. Solo I price has come down, if were lucky, maybe the same will happen here with F2?

Capitalism in action, with us, the customers, reaping the advantages. Pretty cool.

Regards to all.

OF
 

Jill NYC

Portable Hoarder
I have not noticed any difference in clouds or taste in the F2 vs. the Edge. Performs the same with a few more conveniences.
Here are a few comparison photos - please ignore the smudge on the Edge, it was just my greasy thumb mark that I didn’t notice until I finished taking pics.

Here they are with bent stems...



Here they are with native mouthpieces:



Here, I put the Edge in the Davinci Miqro case. It won’t fit with the native mouthpiece (unlike F2) but it does fit with the bent mouthpiece (unlike the F2):


Zipped shut:



And finally, this is by far my favorite way to use the Edge thus far. The sidewinder fits, albeit not snuggly. However - it leads to major clouds!
 

C No Ego

Well-Known Member
just purchased a Fury Edge vape- Yay! . just want to make sure the Fury2 WPA inserts in the Edge bowl chamber for that all glass vapor air path and micro dose amounts ... seen a post a few pages back mentioning it fits but no more info about it

edit , a mix of VAS and I have been sharing my two Fury2 lately and could use a third work horse vape
 

OF

Well-Known Member
just purchased a Fury Edge vape- Yay! . just want to make sure the Fury2 WPA inserts in the Edge bowl chamber for that all glass vapor air path and micro dose amounts ... seen a post a few pages back mentioning it fits but no more info about it

edit , a mix of VAS and I have been sharing my two Fury2 lately and could use a third work horse vape

I don't have a F2 WPA to try, but I'm confident it will NOT work with EDGE. As I said above, the two stems are different diameters. If the F2 stem is long enough to stick into the adapter far enough to reach the seals (my F2 bubbler won't) it's too small to seal. Best plan to buy the WPA designed for EDGE I think. "All glass" is not going to happen.

OF
 
OF,
  • Like
Reactions: BigJr48

C No Ego

Well-Known Member
I don't have a F2 WPA to try, but I'm confident it will NOT work with EDGE. As I said above, the two stems are different diameters. If the F2 stem is long enough to stick into the adapter far enough to reach the seals (my F2 bubbler won't) it's too small to seal. Best plan to buy the WPA designed for EDGE I think. "All glass" is not going to happen.

OF
@HealthyRips.com Quote = Thank you for the question! You cannot use the FURY 2 glass stems with the FURY EDGE accessories attachment. However, you can use your FURY 2 glass stems inside the FURY EDGE chamber without the accessories attachment - just as you would with the FURY 2. We hope this answers your question. - unquote....
only message I've seen mentioned and it looks promising to keep all glass vapor air path and micro amounts... If I'm stuck with silicone and new edge WPA only I'm sending it back
 

Jill NYC

Portable Hoarder
@HealthyRips.com Quote = Thank you for the question! You cannot use the FURY 2 glass stems with the FURY EDGE accessories attachment. However, you can use your FURY 2 glass stems inside the FURY EDGE chamber without the accessories attachment - just as you would with the FURY 2. We hope this answers your question. - unquote....
only message I've seen mentioned and it looks promising to keep all glass vapor air path and micro amounts... If I'm stuck with silicone and new edge WPA only I'm sending it back
I can’t believe I haven’t checked - but when I get home tonight I will check that my F2 bent stem fits directly into the Edge. I assume it does since the oven sizes are the same and HR said so! But will let you know for sure later tonight.
 

OF

Well-Known Member
However, you can use your FURY 2 glass stems inside the FURY EDGE chamber without the accessories attachment - just as you would with the FURY 2. We hope this answers your question. - unquote....

While that's true for at least some other F2 stems, based on the second photo on the F2 page:
https://www.puffitup.com/Healthy-Rips-Fury-2-Vaporizer-p/hr.fury-2_bla.htm

The 'bell' of the WPA happens just above the body (which on the EDGE is half an inch taller). If HR says it works, it does, but from what I can see not so. A taller or bent stem should be OK without the adapter. This photo:
fury-edge-adjusted_orig.jpg


Clearly shows the WPA using the adapter, it, like the bubbler next to it, must be different????

Please let us know how it works? TIA
I can’t believe I haven’t checked - but when I get home tonight I will check that my F2 bent stem fits directly into the Edge. I assume it does since the oven sizes are the same and HR said so! But will let you know for sure later tonight.

It does, or at least mine did. As I said, I don't have a WPA to try, but I suspect it'll hit the body? My bubbler for F2 fits fine, but not using the adapter like in the photo, the one in the photo is clearly different.

Good luck to the OP (and us all) but I don't think it works with that stem for the above reason.

OF
 

HealthyRips.com

Healthy Rips Team
Company Rep
just purchased a Fury Edge vape- Yay! . just want to make sure the Fury2 WPA inserts in the Edge bowl chamber for that all glass vapor air path and micro dose amounts ... seen a post a few pages back mentioning it fits but no more info about it

edit , a mix of VAS and I have been sharing my two Fury2 lately and could use a third work horse vape
Hi! This is the beautiful thing about our FURY EDGE, you can use the FURY EDGE glass accessories with the FURY EDGE accessories attachment and use your entire chamber - or you can use the FURY 2 glass attachments without the accessories attachment and insert them directly into the FURY EDGE chamber for micro-dosing. Our FURY EDGE and FURY 2 have the identical size stainless steel chamber, and all of the FURY 2 glass attachments fit perfectly into the FURY EDGE chamber (they are tall enough as well - including the WPA).

Have a wonderful day!
Healthy Rips Team
https://www.healthyrips.com
 
Well, this may sell me on the Edge. I don't like using a chamber. The way I empty all my vapes is by sticking the stem in my "jar with a hole in the top" ABV collector and give it a toot. That works for all my E-nano stems, my Vapcap, my Fury2, my Argo and just about every other vape I own.

So, now..... why buy the Edge? I remember it had longer battery life (but not a swap-able battery). That would be nice. One reason I never take my Fury2 out is because the battery dies after a few sessions. I take my Argo for on-the-go. So, longer battery is one reason.

Why else would I want one?
 

olivianewtonjohn

Well-Known Member
..really digging the 3D stems with this thing..very good hits consistently.

Can you confirm if the dynavaps fit it? Would help in determining if they are the same as sneakypetes option (which are originally for dynavap). Im happy to buy from HR to support them, if it doesnt fit then its possible HR is thicker glass, if its loose then perhaps thinner glass, etc (since its probably safe to assume they are similar outer diameter).

@Hackerman honestly im not sure why buy fury edge if you already have fury 2 and an arizer go. But perhaps we have different needs? I would guess some overlap between the three devices
 
Last edited:

ohmygodimsohigh

Well-Known Member
just purchased a Fury Edge vape- Yay! . just want to make sure the Fury2 WPA inserts in the Edge bowl chamber for that all glass vapor air path and micro dose amounts ... seen a post a few pages back mentioning it fits but no more info about it

edit , a mix of VAS and I have been sharing my two Fury2 lately and could use a third work horse vape
Fury 2 WPA fits directly into Edge bowl without any other required attachments.
I tried it, posted a story to my instagram demonstrating
 

Jealousy

Well-Known Member
Can anyone tell me how long is the glass stem that comes with the edge accessory attachment and how much of it goes inside/left outside the attachment?
 

olivianewtonjohn

Well-Known Member
Can anyone tell me how long is the glass stem that comes with the edge accessory attachment and how much of it goes inside/left outside the attachment?
Approximately 4.38 cm in length. When inserted there is about 1.85 cm exposed. Good to have the correct number of sig digits right @OF? Although this was measured with an app on my phone, so keep that in mind.
 
Top Bottom