Ed's WoodScents Log Vape - Ed's TnT

Ramahs said:

With the screen at the top of the tube it doesn't let me load as much in the bowl without squashing it down. Plus, for some reason I feel like I get a more even and thorough extraction this way...but that could be all in my head. I'm not sure.

Click to expand...

Thanks for clarifying. And that makes sense and is actually what I meant to suggest/ask before, specifically in relation to being able to load more without squashing the load down which certainly reduces air flow and as you say limits the overall amount of material you can load at a time.

I have a Woodscents myself since some time. I have never gotten around to sharing my thoughts on it. It is an older 2017 model.

I never realised that the screen could be moved to a lower position I did give it a little press earlier but I was worried I might damage something it seems pretty tightly fixed in there.

I would really like to make this adjustment myself because I'm certain it would elevate my WS experience.

A fully loaded Ti tip is really the minimum load I like to rock with on any vaporizer even if I'm looking to microdose with small hits. The biggest drawback to my WS, for me personally is the restricted draw when loading more than just a pinch.

I am frequently torn between packing it fuller and and accepting the reduced airflow and just loading a little for one or two hits and a fast extraction but more fiddling and maintenance constantly emptying and reloading which which I prefer to avoid in favour of a more prolonged session out of each load.

So if I can adjust the screen it would certainly help to improve airflow from a slightly fuller load.

I also have been meaning to give a big shout of thanks to our awsome down under amigo @LesPlenty for alerting me to the existence of the @DDave Ti vapcap screens. Love your warm, upbeat and humorous vibes here bro.

After I saw your post I immediately ordered some and they unquestionably improve the air flow and extraction and all-round experience of using the Ti tips both with the vapcap setup and the WS.

I strongly recommend. Perfect fit. I picked up 12 and I'm glad I did because they do get a bit blocked up after a day restricting the airflow again so I just switched them out and I will ISO them together and try to avoid torching to keep them study for longer.

So if I may please ask @Ed's TnT (hey bro, huge huge love, it's been a while but I'm always following and wishing you the very best my dear kind hearted friend) will I be able to adjust my my own heater screen on my 2017 model and if so any instruction on how to do it without breaking anything would be really useful.

Thanks everyone for all of the passion and enthusiasm you have all put into this thread since the beginning with so much great information and nothing but pure goodwill and fun. This remains without question one of the most peaceful and harmonious threads on this whole website and I can't see that changing at any point.

Nice to be in the mix, out of the closet, as an official Woodscents owner!

letter never sent said:

Wow, this thing is a powerhouse.

Been getting massive rips through water tonight. Starting at 8.5 on the dial seems to be a sweet spot for my unit. I finish it off at 10.

I'm pretty blown away by the vapor output that's achievable using 0.05g or less. From a vape this compact and elegant. Microdosing king.

Side note - does anyone have some good cable management tips? One of my few nitpicks so far is the cord. It gets tangled easily and can become a bit unwieldy, especially with glass. Not the end of the world, but it would be nice if the cord was softer and more flexible.

Click to expand...

As far as cable management goes. I use a binder-clip on the edge of whatever table I'm using it on. It makes it completely manageable and easy.

See the following pic I just took for reference as to what I am talking about:

Nice easy way to keep cables under control @Ramahs , the cable itself is quite stiff and a nice slinky\pliable one would be a nice touch...time for some searching, thanks for the idea @letter never sent..see, something I did not know I needed, great thread!

LesPlenty said:

Nice easy way to keep cables under control @Ramahs , the cable itself is quite stiff and a nice slinky\pliable one would be a nice touch...time for some searching, thanks for the idea @letter never sent..see, something I did not know I needed, great thread!

Click to expand...

Let us know if you find anything interesting in your searching

Ramahs said:

Three days in and I've already decided to move my heater tube screen down to to the bottom of the insertion part of the tube, Like my other Woodscents. I really like it better that way.

Click to expand...

this is genius!

I'm using a glass tube that fits exactly the VapCap and WoodScent heater. So the WoodScent is totally stable on my water tools and stirring is much easier:

Hello all,
I haven't posted a full review yet of my Karelian Burl beauty but so far its been all love

I felt I might be of some quick help if anyone is looking for a 12v coil cord.

I picked it up last week on ebay. It is used for heated motorcycle suits. The price range from $17 to $22 shipped. Search coil cord excc and it should pop up.

Seems to work pretty good and is less cumbersome then the stock cord. It was a little stiff but is loosening up with use, can be stretch too 3ft if needed. I prefer it tight coiled uses up less space then.
45* plug swivels nicely when moved around and up side down for water tools.

Enjoy

Happy belated birthday @Ed's TnT hope it was a good one!

Good evening all, I am just popping in to announce that 2019 WS models will be available in the morning tomorrow. I am giving it hell as you can imagine lining everything up from shop to site to customer with photos site updates social media announcements jeez I am sure I am forgetting other stuff and such. Guess I will find out when its needs doing right. I will have many species available, some I wont. Will have them in limited quantities and some may only be one, With so many species there is only so many you can do of each. Have a look at some below, hope you all like the new body style, am eager to hear how so after its been in hand.





@Ramahs Thats right, stay posted more to come. Thats really a nice WS even for Maple its got that POP going on in it, you scored bro. You know I like mine the same way, just feels right.

@letter never sent Conservation is preservation right, WoodScents rules! Sorry bro I dont have a solution for the cable, pls let us know if you find one worth sharing.

Appreciate the Bday wishes @Modicum @Ramahs @Mr. Me2 @Wolf46

@Alexis My man appreciate your post and for sharing. Most certainly you can adjust your heat port screen, it should be rather easy to do so. I would take a blunt object and lightly press down on it evenly. I have mine same position as @Ramahs where its just above the heater kinda at where the air path shoulders down. If you move it and its not sitting flat it should be easily tweaked to your liking. If you have any problems let me know. The heater should stay put and there will be no issue of damage.

Wow @Alex3oe Thats something I havent seen before. How far does the glass slide over the air path, how far down into the unit does it go? Whats size ID and OD is it also? This is very interesting. Pls tell me more.

@Slickwilly Wow that is still one of the most fun pieces I had ever done. That LE upper rim is something I have only done a couple times maybe. Not a bad coil cable, thanks for sharing. I appreciate the bday wishes too.

I hope all is well everyone, I gotta cover more bases and get the word out. Hope you all like the new shape and look forward to hearing so after its been in hand a bit. Wish everyone a great night!

Slickwilly said:

Hello all,
I haven't posted a full review yet of my Karelian Burl beauty but so far its been all love

I felt I might be of some quick help if anyone is looking for a 12v coil cord.

I picked it up last week on ebay. It is used for heated motorcycle suits. The price range from $17 to $22 shipped. Search coil cord excc and it should pop up.

Seems to work pretty good and is less cumbersome then the stock cord. It was a little stiff but is loosening up with use, can be stretch too 3ft if needed. I prefer it tight coiled uses up less space then.
45* plug swivels nicely when moved around and up side down for water tools.

Enjoy

Happy belated birthday @Ed's TnT hope it was a good one!

Click to expand...

Gorgeous WS you got there.

Modicum said:

I never use water, it leaves some flavor behind . As far as micro dosing , the original Milaana was the greatest until I got my hands on my first WoodScents . It’s efficiency, vapor and taste bends the mind and in the end my piggy bank doesn’t take that big of a hit !

Click to expand...

I use a water piece dry...this is what I use with all of my desktops. Placed ~ 65 6mm borosilicate glass beads in the catcher:


EDIT: Sorry for double post...I reported it to mods.

Ed's TnT said:

Alexis My man appreciate your post and for sharing. Most certainly you can adjust your heat port screen, it should be rather easy to do so. I would take a blunt object and lightly press down on it evenly. I have mine same position as @Ramahs where its just above the heater kinda at where the air path shoulders down. If you move it and its not sitting flat it should be easily tweaked to your liking. If you have any problems let me know. The heater should stay put and there will be no issue of damage.

Click to expand...

Hey Ed thanks brother really appreciate you confirming that. And damn sorry I forgot to shout Happy Returns. Golly they roll around too quick don't they.

I swear man it tripppps me out. Ronaldo vs Messi for Ballon D'or, it spun me out hard a couple years ago (what was that now last week? ) Ronaldo won I think, then it was honest to god like 6 months later and suddenly it was announced that Ronaldo had won again!

I couldn't believe for the life of me a year had passed. I was convinced it was a differemt contest but when I checked- yep, a whole year had elapsed.

However I then came to a realisation- time is an illusion of the 3D material plane and is not linear and constant how we see it.

Anyway....I can't wait to adjust my heater screen. Also @Ed's TnT real sorry to have kept so quiet and cagey about my own WS ownership. As you know it never came to me under normal circumstances at an ideal time and so I never got around to announcing and posting about it.

Partly because I didn't feel there was anything I could say which has not already been expressed many times in the thread so far,

But it is a great vape for sure. One of the very few I can tolerate well without an unusual allergy type reaction to the vape signature as with most. Vapour quality and smoothness is very high and efficiency in particular is off the charts as many have discovered and reported.

Perfect for really enjoying a nice special bit of bud, getting the most out of it in contrast to tearing through a whole pile in no time with a half gram load as I do with bigger desktops.

The WS was my first and only log vape, and I am a self-confessed Macro-doser. Im sure log vapes and micro loads will never be my own preference, but I would never want to be without the option and the services.

Since installing the DDave Ti screens and improving airflow, the WS has been my most used vaporizer for the past week now. I have been favouring it over the vapcap because the vapor quality is so much better and and it is less aggravating to my airways.

One thing I particularly like about the WS- despite how hard it hits, the high is a very functional one. Just right without chopping your head right off. Not sleepy and mongey like the Vapcaps can be.

Sorry you can see I suck at these vaporizer reviews. But I'm so glad I have my Woodscents. I too have never even nearly combusted, simply seems impossible even at 10 with any material, but it comes out dark and spent at that heat.

I still don't have an actual preferred heat setting. There is a wide range of very acceptable vapor. I go through water 100% of the time which is a key reason I prefer the most open airflow.
I never go below 8, lately 9-10 mostly.

10 can be less tasty and pleasant, but pulls the goods out very quickly. But such different effects with different temperatures. On 9 the taste is a lot better as is vapor quality. 9-9.5 is my usual range currrently..

Okay I just thought I would at least share a few thoughts. Off to see about adjusting my heater screen now- bigger loads...better airflow! Excited.

Edit- heater screen adjusted with ease using Ed's supplied wooden dowel.

Slickwilly said:

Hello all,
I haven't posted a full review yet of my Karelian Burl beauty but so far its been all love

I felt I might be of some quick help if anyone is looking for a 12v coil cord.

I picked it up last week on ebay. It is used for heated motorcycle suits. The price range from $17 to $22 shipped. Search coil cord excc and it should pop up.

Seems to work pretty good and is less cumbersome then the stock cord. It was a little stiff but is loosening up with use, can be stretch too 3ft if needed. I prefer it tight coiled uses up less space then.
45* plug swivels nicely when moved around and up side down for water tools.

Enjoy

Happy belated birthday @Ed's TnT hope it was a good one!

Click to expand...

Beautiful!

--------------------------------------------------------

Ed's TnT said:

Click to expand...

^ Yup...I'm in love. That beautiful burl always gets me!

Alex3oe said:

stirring

Click to expand...

Never had to stir, even at lower than standard volts and my extraction is always even.

Ed's dowel is good for removing filters, S&B brush for inserting, especially mesh screens.

Ive never had to stir either.

LesPlenty said:

Never had to stir, even at lower than standard volts and my extraction is always even.

Click to expand...

Ramahs said:

Ive never had to stir either.

Click to expand...

Lately after every hit I'm tapping my stem out into a little ceramic cup. Calling it such makes it sound a little inelegant, but it's basically a shot glass.

I find my first hit always cooks the herb closer to the heater a little more. The WS is nice in that you can continue to draw and you will eventually end up with an evenly extracted load, but I find mixing it up preserves the flavor a little better. Reload with the staw method and continue!

Also, sometimes I will just stick little nugs into my stem, so this lets me use the stem to mash the bud into a finer grind after a great flavor hit for a more complete extraction. Honestly, if I didn't have other vapes I probably wouldn't even grind my weed anymore.

It's a nice little session ritual. I am running at 13.0v recently.

@Ramahs Gotta say thanks man for alerting me to the fact the heater screen is adjustable I honestly never realised.

Im just about to try it now, except Im so friggin dumb, had my unit all heat-soaked up, finally sat down to toke, I could tell something wasn't quite right then I realised the pesky thing wasn't even plugged in at the socket!

Muppet me, just waiting for it to heat up now. So to kill a moment, I was thinking about you saying how you get better and more even extraction with the heater screen lowered and I think I can see why this is the case because I do actually stir my loads as I always have a green ring around the edge.

I can see in advance how the heater tube will now improve this, by actually bunching up the material away from the edges into the centre, funnelling the heat through it more evenly and I expect also- bringing in some extra conduction heat, directly on the top outer edge of herb, which is where the weak extraction point is.

I'm confident of this logic anyway.
Okay, nicely heated up now. A nice fresh ground pile of our 2018 Durdan Poison Autoflower awaits. We have some superb Autos on the go currently, galavanting to a record early finish, 61 days old with 2 weeks max to go almost home.

To any interested please feel welcome to come take a browse: https://www.instagram.com/p/B0OiqGIHAQz/?igshid=sim422fxbnph

I'm vaping a hash - weed mixture mostly, so stirring is mandatory for me with every vape

Ah, that makes sense @Alex3oe.

JEMSKU said:

I find mixing it up preserves the flavor a little better. Reload with the staw method and continue!

Click to expand...

Or don't pack as much to start with and pack a fresh load every hit if you really want to preserve vapor, the WS works better with a nice sprinkle load, don't tamp it too tight or at all

Ed's TnT said:

Wow @Alex3oe Thats something I havent seen before. How far does the glass slide over the air path, how far down into the unit does it go? Whats size ID and OD is it also? This is very interesting. Pls tell me more.

Click to expand...

I'll make some more and better pics and do some measuring and send it all over to you

Good morning all, popping in for a quick post, will be back soon to follow up on yalls posts. Its on yall

Hey guys, well stoned late evening UK. Just a few quick thoughts since I lowered my WS heater screen today:

For some reason, however I load and use, my Ti tip gets so much hotter to touch compared to before I lowered the screen. I always used to just about be able to stir between hits with no cool down time, placing my thumb over the Ti bowl to keep herb in while stirring with Bud's pick tool.

I would often feel the heat on my thumb but it would very rarely stop me from actually completing the task without the need to grimace or pull away.

Since adjusting the screen earlier the ti tip is radically hotter and untouchable for quite a while after each hit. Huge difference.

Also, my ABV is darker at respective temps. When I remove the Woodscents the herb has a different appearance and togetherness , looser and more fluffy and uneven (not extraction, just the way it sits in the tip)

also has a tendency to fall out more easily or get pulled out stuck inside the the top of the heater against the screen. Like those gravity faced fairground rides we would stick to the wall spinning around lol !

I'm guessing the improved airflow is resulting in in more heat getting into the actual tip in that short space of time with each inhalation.

It did hit me harder too with a fresh DDave Ti screen. Hope everyone is having a good night. Stoned here should be...

Alexis said:

also has a tendency to fall out more easily or get pulled out stuck inside the the top of the heater against the screen.

Click to expand...

If I have a mostly full bowl, I don't immediately push the heater tube down on the Ti tip right away. I just sort of set it on top, and as I hit it the heater settles a bit and is eventually all the way in either partly through the first hit or into the second hit. When I use that technique I almost never have anything stick to or in the heater tube. That first hit just needs to be a long one to evaporate anything that is immediately touching the tip of the heater tube.

It's a little different technique than what I use with the screen at it's starting position.
My first Woodscents had the screen lowered already when I received it (I purchased it used on r/entexchange), but this new Maple one, I decided to leave the screen the way it originally came for a while to see if I'd like it. By day-3 of use I decided that I did not, and I lowered it.

I am glad I kept my Walnut unit CCD in the flush position as it helps heat my Rosin that I melt into a small ball of S/S wool, my Huon Pine is for low temp bud hits, the walnut used to be used to temperature step but now it is on rosin duty at 13.2 volts (I was using it at 12.3 volts to finish off bowls but was doing so less and less due to flavor chasing)

LesPlenty said:

I am glad I kept my Walnut unit CCD in the flush position as it helps heat my Rosin that I melt into a small ball of S/S wool, my Huon Pine is for low temp bud hits, the walnut used to be used to temperature step but now it is on rosin duty at 13.2 volts (I was using it at 12.3 volts to finish off bowls but was doing so less and less due to flavor chasing)

Click to expand...

Hey man. Interesting point about the Rosin. But maybe for all we know, it might extract even better from the Rosin pushed lower down, as it has unquestionably changed the performance for me. I swear more heat is getting into the load and the bowl now.

So I would be curious how that alteration would affect rosin extraction, my Ti tip gets much hotter now with every draw, it was burning the shit out of me.

I did notice my CCD belching vapor when I removed it from my M18 S/S tip(more conduction to help the rosin sizzle) as would the standard CCD placement, touching the top of the load?
I may have used too much as it seemed to last quite a while...longer than me, getting used to having rosin...

Anyone cop a 2019 model yet? Looking forward to seeing some of those in the wild!