So it will take me half a kilo of buds before I hit the sweet spot.
(I thought sticking to 10gram loads will make working out percentages easier.
Dabpress Rosin Plates
- Thread starter dabpress.com
- Start date
(I thought sticking to 10gram loads will make working out percentages easier.
Thanks for clearing that up Matt! Thought that seemed strange ... I’ll continue recommending these then and will add them to my next order as previously planned
Papi
SevGen
UPS just delivered plates. .let's see if I can post pic. It's been a while. Box is beat up a bit due to oversized Amazon box with a piece of craft paper for padding. Could be packed better at warehouse for sure but the plates box was well packed and everything looks ok..I guess? Thanks again for this generous prize dabpress and @psychonaut
Modnote: Edited to display images
Modnote: Edited to display images
Last edited:
buckhakeesah
Well-Known Member
Do all rosin pressing machines output some level of audible noise (clicking sound from the heating controller) while heating up and maintaining temps? I notice mine does (non-dp) and am wondering if this is standard across any pressing device in the market?
tepictoton
Well-Known Member
Never noticed that on dabpress plates
That sounds like there is a mechanical relay of some sort in there ... instead of a zero crossing SSR ...
High5 enails with the Omron PID for example by default have the alarm trigger the internal relays (with nothing attached to them so they click until you turn them off ... the internal relays on the Omron E5CC are mechanical and not SSR’s but for the actual switching the enails use external SSR’s)
UPS just delivered plates. .let's see if I can post pic. It's been a while. Box is beat up a bit due to oversized Amazon box with a piece of craft paper for padding. Could be packed better at warehouse for sure but the plates box was well packed and everything looks ok..I guess? Thanks again for this generous prize.
Modnote: Edited to display images
I've fixed the images that you were trying to display. You can't use the insert image tool for galleries, that's why they weren't showing. You need to insert each individual image by using the direct link provided by the image host.
https://dabpress.com/products/dabpr...-mini-rosin-press?_pos=3&_sid=8ad695ffa&_ss=r
Here are the details of the pump's dimensions -
Specifications:
- Capacity: 10 Ton
- Rated PSI: 8800
- Gross Weight: 8.4kg
- Dimension of Package: (L) 75cm x (W) 23cm x (D) 24cm
- Length of Pump: 23.6 inches / 60cm
Last edited:
Elbuort19
Well-Known Member
Thanks for clearing that up Matt! Thought that seemed strange ... I’ll continue recommending these then and will add them to my next order as previously planned
Sorry guys, installing heat pump and a 1 day job turned into 3. lol
Been using these jars since JCat posted about them. I collected the last dab from the jar and after I cleaned it I noticed the bottom was scratched up. Don't know what to say, there's material missing from the bottom of the jar which looks like paint.
tepictoton
Well-Known Member
Sure seems like it. A very quick way to check if they are painted... is breaking one?
But this would be a very big surprise to me if they turn out to be painted. @divinetribe is known to look after his clients, and I do not see him selling painted glass knowingly without clearly mentioning it.
But Let's keep this about dabpress. @psychonaut thanks for reply and being like a little bridge between the forum and China
But this would be a very big surprise to me if they turn out to be painted. @divinetribe is known to look after his clients, and I do not see him selling painted glass knowingly without clearly mentioning it.
But Let's keep this about dabpress. @psychonaut thanks for reply and being like a little bridge between the forum and China
@FlyingLow They have actually done a lot of people favors by doing simple post processing. Now with the different consistancies that we are able to achieve, people can have their preferred consistancy. I know when I was buying from my caregiver, I always picked the budder over the shatter or wax, I wanted something that was easy to get the doses right, and shatter irks me in about every single way, not most of which is it's ability to fling across the room and be a complete waste of good medicine!
I do feel that heat is the enemy in our process, the big villan we have to confront and defeat while also using it's strength to our advantage. So things like drip tech, low temperature pressing, pressing higher quality starting material that can be pressed at the lowest possible temperatures, it all matters.
Things such as THCa isolation, "jar tech", or just whipping it during cooling/warming cycles to try and create a different consistancy I find useful and hope that people keep experimenting. Maybe with more people experimenting we can get some good data and draw from our current conclusions.
I haven't seen anyone isolate THCa with any appreciable yields, you might as well static harvest dry sift potent heads and vape that, it's already full melt.
Jar tech I think really just requires a bit too much babysitting. In the process it can go from everything looks fine and normal to wow this is all much worse than when I started, in about 10 minutes. I think practice makes perfect for this like anything and you can still preserve the flavor, I dont think it will ever be like it was when first pressed though.
@JCat good call, I was thinking relay as well, cheap part to replace!
-------------
Here's some pictures of our latest accessories, the titanium enail kit and 7x7" heated plate to manipulate your oils while warm.
$109 - Titanium universal enail with carb cap
https://dabpress.com/collections/thca-rosin-jam/products/enail-dab-kit-herbal-vaperizor
$109 - 7x7" sauce plate
https://dabpress.com/collections/thca-rosin-jam/products/terp-sauce-plates-jar-tek
Availability only in the China factory warehouse at this time.
I do feel that heat is the enemy in our process, the big villan we have to confront and defeat while also using it's strength to our advantage. So things like drip tech, low temperature pressing, pressing higher quality starting material that can be pressed at the lowest possible temperatures, it all matters.
Things such as THCa isolation, "jar tech", or just whipping it during cooling/warming cycles to try and create a different consistancy I find useful and hope that people keep experimenting. Maybe with more people experimenting we can get some good data and draw from our current conclusions.
I haven't seen anyone isolate THCa with any appreciable yields, you might as well static harvest dry sift potent heads and vape that, it's already full melt.
Jar tech I think really just requires a bit too much babysitting. In the process it can go from everything looks fine and normal to wow this is all much worse than when I started, in about 10 minutes. I think practice makes perfect for this like anything and you can still preserve the flavor, I dont think it will ever be like it was when first pressed though.
@JCat good call, I was thinking relay as well, cheap part to replace!
-------------
Here's some pictures of our latest accessories, the titanium enail kit and 7x7" heated plate to manipulate your oils while warm.
$109 - Titanium universal enail with carb cap
https://dabpress.com/collections/thca-rosin-jam/products/enail-dab-kit-herbal-vaperizor
$109 - 7x7" sauce plate
https://dabpress.com/collections/thca-rosin-jam/products/terp-sauce-plates-jar-tek
Availability only in the China factory warehouse at this time.
I know this is a dab press forum but I have to defend my business. I have to reiterate I would never sell painted glass, the original poster just sent me a picture of a black jar with obvious scratches and paint but I have sold over 50,000 of these jars and have had multiple shipments of them, and have never had anyone complain of this. So I’m wondering exactly if he got them from me or he might’ve got them from someone else
Sure seems like it. A very quick way to check if they are painted... is breaking one?
But this would be a very big surprise to me if they turn out to be painted. @divinetribe is known to look after his clients, and I do not see him selling painted glass knowingly without clearly mentioning it.
.
But Let's keep this about dabpress. @psychonaut thanks for reply and being like a little bridge between the forum and China
@divinetribe I completely understand. Perhaps @Stu can see if there is a more appropriate spot for that discussion?
-----------------
Our skeleton frame is now available on the webstore from the china factory only at this time. Pair it with a lot of different types of plates and caged plates to update your setup to driptech capability and pressure gauge with our 10-ton hydraulic hand pump (sold separately)
$399
https://www.dabpress.com/products/r...e-10-ton-driptech?_pos=2&_sid=b3106bd39&_ss=r
Users Guide (Compatibility of plate kit size is listed here) -
https://cdn.shopify.com/s/files/1/2013/8731/files/Protable-frame-user-manual-min.pdf?11999
-----------------
Our skeleton frame is now available on the webstore from the china factory only at this time. Pair it with a lot of different types of plates and caged plates to update your setup to driptech capability and pressure gauge with our 10-ton hydraulic hand pump (sold separately)
$399
https://www.dabpress.com/products/r...e-10-ton-driptech?_pos=2&_sid=b3106bd39&_ss=r
Users Guide (Compatibility of plate kit size is listed here) -
https://cdn.shopify.com/s/files/1/2013/8731/files/Protable-frame-user-manual-min.pdf?11999
Last edited:
hey psychonaut. any chance in the future a demo vid with the heated plate for post processing?
I have a coffee mug warmer that is adjustable to 230 F. I tried using that with some stuff that was extremely sticky. I followed directions i found online and left the lid on and it sitting at 130 F. for several hours, no change in consistency. I then bumped up the temp to maybe 150 and left the lid off for another hour or so, still no change. I then just let it sit with the lid off at room temp and kept stirring, still no change.
The consistency stayed the same. Taste was still good, but more mellow and lost high flavor notes if that makes sense.
I may have needed to do one of those longer, or this stuff just won't budder.
Just wondering if i would get better results from something like the plate above, plus I LOVE TOYS haha. Also would you put the concentrate straight on the plate, or in a jar then on the plate?
I actually got some more of the same strain, but better buds. I pressed one nug that was 4 grams. Got back 20.4%, which was much better then the other batch averaging 13ish%.
The most i have gotten from a strain was 25%, which was awesome.
Another strain that only produced 14%, autobuddered within a day on its own while in the jar with the lid on.
Being over sticky isn't the end of the world, but it is fun experimenting. Also, the buddered one is just a breeze to use and that, so it is nice if it isn't gonna hurt flavor/effects.
Since i switched to glass i picked up some more tools. I got a set from dulytek on amazon and is great. The beveled edge flate piece scraps the glass pretty much perfectly, so no hassling with warming to get the last bits out.
EDIT: I prolly should have clicked the link and read the description first, very informative. Based on the write up though sounds like more for making diamonds then for changing the consistency of the rosin. Last question, would the plate be available separately and be able to connect to our enails we already have?
I have a coffee mug warmer that is adjustable to 230 F. I tried using that with some stuff that was extremely sticky. I followed directions i found online and left the lid on and it sitting at 130 F. for several hours, no change in consistency. I then bumped up the temp to maybe 150 and left the lid off for another hour or so, still no change. I then just let it sit with the lid off at room temp and kept stirring, still no change.
The consistency stayed the same. Taste was still good, but more mellow and lost high flavor notes if that makes sense.
I may have needed to do one of those longer, or this stuff just won't budder.
Just wondering if i would get better results from something like the plate above, plus I LOVE TOYS haha. Also would you put the concentrate straight on the plate, or in a jar then on the plate?
I actually got some more of the same strain, but better buds. I pressed one nug that was 4 grams. Got back 20.4%, which was much better then the other batch averaging 13ish%.
The most i have gotten from a strain was 25%, which was awesome.
Another strain that only produced 14%, autobuddered within a day on its own while in the jar with the lid on.
Being over sticky isn't the end of the world, but it is fun experimenting. Also, the buddered one is just a breeze to use and that, so it is nice if it isn't gonna hurt flavor/effects.
Since i switched to glass i picked up some more tools. I got a set from dulytek on amazon and is great. The beveled edge flate piece scraps the glass pretty much perfectly, so no hassling with warming to get the last bits out.
EDIT: I prolly should have clicked the link and read the description first, very informative. Based on the write up though sounds like more for making diamonds then for changing the consistency of the rosin. Last question, would the plate be available separately and be able to connect to our enails we already have?
Last edited:
Moses Baca
Colorado State Reformatory #8755
Agree! I was on the website earlier today and saw these and thought, "I don't remember those." 
Dake pumps work with the cylinder on the frame. Our gauge kit can hook up to the dake pump as well if you wanted that option.
Doktor Dub
Well-Known Member
@FlyingLow They have actually done a lot of people favors by doing simple post processing. Now with the different consistancies that we are able to achieve, people can have their preferred consistancy. I know when I was buying from my caregiver, I always picked the budder over the shatter or wax, I wanted something that was easy to get the doses right, and shatter irks me in about every single way, not most of which is it's ability to fling across the room and be a complete waste of good medicine!
I do feel that heat is the enemy in our process, the big villan we have to confront and defeat while also using it's strength to our advantage. So things like drip tech, low temperature pressing, pressing higher quality starting material that can be pressed at the lowest possible temperatures, it all matters.
Things such as THCa isolation, "jar tech", or just whipping it during cooling/warming cycles to try and create a different consistancy I find useful and hope that people keep experimenting. Maybe with more people experimenting we can get some good data and draw from our current conclusions.
I haven't seen anyone isolate THCa with any appreciable yields, you might as well static harvest dry sift potent heads and vape that, it's already full melt.
Jar tech I think really just requires a bit too much babysitting. In the process it can go from everything looks fine and normal to wow this is all much worse than when I started, in about 10 minutes. I think practice makes perfect for this like anything and you can still preserve the flavor, I dont think it will ever be like it was when first pressed though.
@JCat good call, I was thinking relay as well, cheap part to replace!
-------------
Here's some pictures of our latest accessories, the titanium enail kit and 7x7" heated plate to manipulate your oils while warm.
$109 - Titanium universal enail with carb cap
https://dabpress.com/collections/thca-rosin-jam/products/enail-dab-kit-herbal-vaperizor
$109 - 7x7" sauce plate
https://dabpress.com/collections/thca-rosin-jam/products/terp-sauce-plates-jar-tek
Availability only in the China factory warehouse at this time.
Looking really nice! What about a set where you get one controller and can plug in the Heatplate or the Coil? And i d like to see a 20mm coil and quartzbanger....
Looking really nice! What about a set where you get one controller and can plug in the Heatplate or the Coil? And i d like to see a 20mm coil and quartzbanger....
I'll make the recommendation. The problem when you start getting into quartz bangers you have to account for all the different joint types, we really just wanna keep things simple and offer beginners a working setup. Have you seen the hybrid quartz/ti nails? They use a flat coil like what's used on the dnail halos on a universal Ti base and then a quartz dish on top of the flat coil heater.
gunmetalshark
Glass Addict
Yeah, like a bigger Version of the dnail Polar Shifter, that would be dope
http://www.d-nail.com/polar-shift
http://www.d-nail.com/polar-shift