Sticky Brick Labs Vaporizer
- Thread starter Justpassedu
- Start date
ThAt is a great collection @Coal Cracker. The woods are all beautiful and unique. A clean cut group that packs a sneaky tsunami punch that the uninformed would never see coming. I don't think a lot people know about Sticky Brick but I do know that if they knew theyd like them. I'm fully on board. Since I got mine I've used nothing else. Since I put in the restrictor disc and put the heat to it without fear I've done nothing but babble about its greatness using terms like "game changet" and "revolutionary.". My wife has threatened to leave me if I don't shut up about it so I keep blasting away here. Sorry. I think we all mostly feel the same way otherwise we wouldn't post here, so my bad for beatin the dead horse. I wish others could find out about these beasts. We all know. Lol
nonamekevin
Well-Known Member
If you could only use one, which is it and why?
alleyhoops
Phila
@Coal Cracker, is that a Canary OG? That’s the one I have. Very beautiful wood
Coal Cracker
Well-Known Member
Yes
That's a tough one. I keep changing my mind haha. They all hit great. Right now, cause I've been on the go a lot, It's been the junior. I don't think you'll be disappointed getting any of the 3. I'm very glad I found these vaps. I love the flavor that I get from these. I dont use a water piece no more like I did with electronic vaps
Last edited by a moderator:
bossman
Gentleman Of Leisure
Whoa! I installed the restrictor disk in my limba og and I do find it to be a more reliable way to get big hits. Without it it seems more hair trigger to combusting even with a small flame and will need stirring after every big hit. By contrast the vapor stays dense safely for longer with the disk plus I'm getting more even browning like I'm used to with my Splinters.
Beautiful OG @bossman. Really nice. Your description of the hair trigger right on the edge of combustion is spot on to my pre-disc experience with my Maxx. The disc just let's me go to a whole new level of massive hits. Every time. Without combustion. At all. Like the vape is intended to perform.
nonamekevin
Well-Known Member
Anyone else use their brick with CBD flower? Don't really care for the taste of hemp, but i started a break today. Through the runt, cbd still tastes weird, however, it's more tolerable than it was through my dynavap.
alleyhoops
Phila
Yes I do. Have to find a good company to buy it from. I think its very tasty with my OG and even when I owned a runt. i thought it tastes better than the Dynavap
Ramahs
Fucking Combustion (mostly) Since February 2017
I only have a HydroBrick Maxx at the moment. I hope to have a SBL collection like yours one day!
CABtheFISHKING
CAB
STICKY BRICKS SUCK!!!
Good I got your attention! Sorry for speaking such blasphemy. I hope you're having a wonderful week friend. Came here to say that Boundless Tera concentrate pads fit perfectly into almost all Sticky Bricks. I suggest using a double/triple flame jet lighter for a faster heat up but if all you have is a single flame torch just take out the restrictor disk to allow more heat to zap your dabs. Keep on rocking everyone!
Good I got your attention! Sorry for speaking such blasphemy. I hope you're having a wonderful week friend. Came here to say that Boundless Tera concentrate pads fit perfectly into almost all Sticky Bricks. I suggest using a double/triple flame jet lighter for a faster heat up but if all you have is a single flame torch just take out the restrictor disk to allow more heat to zap your dabs. Keep on rocking everyone!
Good advice @CABtheFISHKING . I'm wanting to try some concentrates too. So far I've just put kief on top of herb. That works bueno with The restrictor disc. I'm interested in the adapter and the banger and I wonder if anyone here has used them yet? I've also read that some people have used the storz and bickel capsules which leads me to believe their concentrate pads would also fit. I have some of both i just haven't checked them out in my Maxx yet.
nonamekevin
Well-Known Member
Before spending money on adapters, try placing a small dab, maybe the width of the metal stir tool the Maxx comes with, on top of a freshly ground, LIGHTLY tamped, bed of herb. The dab should sit right in the center. Rip as normal. If you are able to get the herb brown on the first rip, you'll see the center is still green and only the edges are brown. The dab would have melted into the herb as well as vaporized. Stir it for two more solid hits. It is a great combo hit, with huge clouds. This is absolutely my favorite way to use the brick.
The downside, you gotta replace screams more often. $6 gets you 200, 5/8" Stainless steel screens on Amazon. That's a lot of dabs.
CABtheFISHKING
CAB
Another thing you could do is buy a spool of SS316 vape wire (anything between 30 to 36 gauge) and form a pad and then lay it on top of some rayon cotton.
Today I am absolutely crushed. As I put my Maxx down after a delicious hit i noticed a line going from where the mouthpiece goes into the Brick, right through the burned in logo.....A CRACK. After about 3 weeks. I have been so careful with it...never been dropped, gently placed on table, I was even super careful taking the 18 mm mouthpiece attachment out the two times I cleaned it. Like I said, I'm devastated. I spent extra $$$ to get purple heart wood, and I love it. I'm going to contact SBL and see what they say. I'm fond of the phrase "game changer" and sadly this is too. I can't imagine what happened except being wood it just did what wood does sometimes. I'll report back what happens going forwArd but today is a sad day for me.
Thanks @Megaton. I am hopeful, and I believe they will too. I contacted customer service and they got right back to me. I sent them photos and documents, and even though I got it at y PuffItUp StickBrickLabs said they'd work with me on it. I'll hear back today from them i think.
Okay I'm probably going to get yelled at for back to back posts but I just wanted to report that Sticky Brick customer service got back with me and they are going to replace my Maxx due to the crack could break completely. I'm super happy and i will always be a sticky brick supporter due to the performance of my Maxx and their customer service after the sale. I'd rather mine not have cracked but I'm grateful for the replacement and how I was dealt with. Thank you Sticky Brick, and I'm sorry to the moderator for the back to back.
Okay I'm probably going to get yelled at for back to back posts but I just wanted to report that Sticky Brick customer service got back with me and they are going to replace my Maxx due to the crack could break completely. I'm super happy and i will always be a sticky brick supporter due to the performance of my Maxx and their customer service after the sale. I'd rather mine not have cracked but I'm grateful for the replacement and how I was dealt with. Thank you Sticky Brick, and I'm sorry to the moderator for the back to back.
Last edited by a moderator:
So I just got my replacement Hydro Maxx. What an easy company to work with... Sticky Brick customer rep (not sure if I should say his name here) was really helpful, and even though I bought it from another retailer Sticky Brick made everything right after my Maxx developed a cosmetic crack that could have gotten worse. They even emailed me to say thanks for letting them make things right. Great product, service, and I'm really happy
flammy
Well-Known Member
That's great to hear and I honestly would have been shocked if you weren't taken care of. Fantastic customer service.
nonamekevin
Well-Known Member
Surprised there hasn't been more posts since the sale is over soon. Guilty of looking daily at the yellow heart og...
Ramahs
Fucking Combustion (mostly) Since February 2017
Nice choice, but it's that Canary OG that gives me wood!