• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Multi-brand HEALTHY RIPS FURY

Vaporific

All who wander are not lost...

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Hi All! Sorry about the 'tease' yesterday - it was simply meant to let our FC friends know that we have our FURY EDGE just about ready for release. Our FURY EDGE is the third progression of our original FURY. It is built on the same proven FURY platform, but is slightly taller (10 mm) to allow for a much larger battery. We also packed it with all the features that you could possibly want in a vaporizer - especially in the $150 range.
Here are just a few of the eight upgrades to our FURY EDGE vs our FURY 2:
  • 2300 mAh Lithium Polymer battery - almost 50% larger than our FURY 2.
  • Accessories Attachment for the glass accessories - inspired by a @Vape Dr. design (thread post #361).
  • Haptic Feedback vibration when turning on/off and when reaching set temperature.
  • USB-C Charging for fast charging and non-directional plug into the unit.
We are extremely confident in a very smooth transition from our FURY 2 to our FURY EDGE - similar to the natural transition from our FURY to our FURY 2 two years ago. Our FURY EDGE is our HR design and is contractually exclusive to us - we are not allowing rebrands of this device.

In the spirit of peace, we are reluctant to give an exact date of our FURY EDGE release. However, as we approach the FURY EDGE launch over the next 4-5 weeks, we will continue to post information, pictures, and videos. We sincerely hope that this is enough information to satisfy your curiosity for now :).

All the Best!
Healthy Rips Team
https://www.healthyrips.com

Nice! Giving the Fury a fierce upgrade. That is one thing I've noticed now that I have a Fierce, its upgrades made the Fury2 feel lacking, so the FEdge sounds like a perfect evolution solution! :tup:
 

Vaporific

All who wander are not lost...
One FEdge upgrade wishlist item I forgot earlier would be a magnetic mouthpiece. Since I've had MP issues with two units I can't believe I forgot to mention that as that's Fierce-like. A larger battery though likely not swappable would be huge and truly make it an all-day device. Weekend days usually need a recharge during the day for me but I have two Furies which are my only vapes at the moment :):peace:...
 

LesPlenty

Well-Known Member
Company Rep
I gave my F2 oven a deep clean the other night
My F2 was feeling rather asthmatic as I really only ever use it on a bong with a cloud buddy (cleisen adapter) I noticed sometimes when I replaced the carb cap after clearing the bowl, a little backpressure puff of vapor would come out of the air intake. I then cleaned the oven as @Jill NYC advised but also just turned the unit the right way up, placed it over a glass container and proceeded to fill the bowl with 100% pure Iso using a syringe. I ran a total of 100ml completely through the unit and the iso/oil that was collected from under the unit looks very dark and was reclaimed(poo dabs)
I left the unit in front of a fan for a few hours and left it overnight to dry completely before using it again, that was a couple of weeks ago and the little guy is still working fine with a bit better air flow.
I would not recommend people do this to a unit that is under warranty or is performing properly anyway.:tup:

mod note: edited to move content oputside of quote
 
Last edited by a moderator:

vaptronix

Well-Known Member
no damage to the unit?

Uc5kgRh.png
 

StringTheorista

Well-Known Member
I believe @StringTheorista mentioned the Miqro case will fit the F2. I tried and it’s a tight fit but it does the trick and was designed to be smellproof.
https://www.davincivaporizer.com/miqro-soft-case/
Also, other cases I have for other reasons that fit the ONE/ Fury 2 are this lighter case, which is similar to the pelican 1010 but smaller:
https://www.amazon.com/OtterBox-Lighter-Cargo-Case-Discontinued/dp/B00X7RVMK0
A1-B7-BF78-6854-44-B3-AD83-2-C4-C65-DC6-DBA.jpg


C63-A27-DF-9-E90-4-ADC-93-A3-F2-D1-B9274-F3-E.jpg



And this case, that comes free with a mini cash stash or other “Tru Utility” product
https://www.amazon.com/True-Utility-TU241B-P-CashStash-Waterproof/dp/B00D6D8YAG
54736-F1-B-DBCB-48-A8-9-F8-A-1429-E8884374.jpg
 

Jill NYC

Portable Hoarder
So.. in the past week both my glass stems have been broken (WPA and bent stem).
Should I spend $30 bucks and rebuy from HR or spend $35 and get the One accessory and their own bent stem and WPA?
The One bent stem doesn’t look that “bent” and the HR bent stem has always been my favorite. Then again, I am a creature of habit so maybe I need to try something new.
Maybe I should just flip a coin... or just wait for the Edge... (which I do NOT need)...
 

Pistol Pete

Well-Known Member
So.. in the past week both my glass stems have been broken (WPA and bent stem).
Should I spend $30 bucks and rebuy from HR or spend $35 and get the One accessory and their own bent stem and WPA?
The One bent stem doesn’t look that “bent” and the HR bent stem has always been my favorite. Then again, I am a creature of habit so maybe I need to try something new.
Maybe I should just flip a coin... or just wait for the Edge... (which I do NOT need)...
Remember you only live once, I think?!:rofl:
 

Vaporific

All who wander are not lost...
So.. in the past week both my glass stems have been broken (WPA and bent stem).
Should I spend $30 bucks and rebuy from HR or spend $35 and get the One accessory and their own bent stem and WPA?
The One bent stem doesn’t look that “bent” and the HR bent stem has always been my favorite. Then again, I am a creature of habit so maybe I need to try something new.
Maybe I should just flip a coin... or just wait for the Edge... (which I do NOT need)...
Sorry to hear!
I’d spend the short money on the HR bent stem if it’s your fave and save your nickels for a more substantial purchase, perhaps the Edge or other. I’m still mulling my next vape yet loving my dual Furies and use them ALL THE TIME! :):peace:
 

RUDE BOY

Space is the Place
So.. in the past week both my glass stems have been broken (WPA and bent stem).
Should I spend $30 bucks and rebuy from HR or spend $35 and get the One accessory and their own bent stem and WPA?
The One bent stem doesn’t look that “bent” and the HR bent stem has always been my favorite. Then again, I am a creature of habit so maybe I need to try something new.
Maybe I should just flip a coin... or just wait for the Edge... (which I do NOT need)...

If you like using the Bent Stem in the Fury You'd ought to buy a new one. . . the One just has the mouth piece with glass sticking out of one end but it's not really a "stem" like HR came up with, you fill the chamber like the original Fury mouthpiece.
 

StringTheorista

Well-Known Member
If you like using the Bent Stem in the Fury You'd ought to buy a new one. . . the One just has the mouth piece with glass sticking out of one end but it's not really a "stem" like HR came up with, you fill the chamber like the original Fury mouthpiece.
...which some consider a benefit. You get a bigger bowl and less chance of breakage. Were it me, I’d get the ONE accessory mouthpiece and the POTV bent stem
 

MonkeyTime

Well-Known Member
So.. in the past week both my glass stems have been broken (WPA and bent stem).
Should I spend $30 bucks and rebuy from HR or spend $35 and get the One accessory and their own bent stem and WPA?
The One bent stem doesn’t look that “bent” and the HR bent stem has always been my favorite. Then again, I am a creature of habit so maybe I need to try something new.
Maybe I should just flip a coin... or just wait for the Edge... (which I do NOT need)...

Yes you do :razz:
 

Jill NYC

Portable Hoarder
Thanks for all the suggestions!

I went with the HR bent stem because I miss it already. The One bent stem just doesn’t look long enough or bent enough to be as smooth.

I got the One accessory and WPA because it should be easier to use.
I like the way the mouthpiece holds the WPA in place on the Fierce. It makes it much easier to lift it off the bubbler. As mentioned before by others, the precarious way you have to lift the F2 WPA is exactly why mine broke (I didn’t explain it properly to a newbie and it was broken on the first hit)
I’m glad they are addressing it with the Edge.
 

RUDE BOY

Space is the Place
...which some consider a benefit. You get a bigger bowl and less chance of breakage. Were it me, I’d get the ONE accessory mouthpiece and the POTV bent stem

I like the HR glass stems much better than I like filling the chamber, to me it just tastes so much better that I only use the stock mouthpiece and fill the chamber when it's cold out and I'm rushing to get through the session. I'm pretty sure I'll end up getting the ONE mouthpiece down the road though.
 

His_Highness

In the land of the blind, the one-eyed man is king
I'm partial to the POTV One's accessory adapter and WPA. I just leave the WPA in and use it dry or through a bubbler. I like that the WPA (and the other ONE glass pieces) don't take up space in the oven.

I do see your point @RUDE BOY about the HR glass pieces. It's similar to the Arizer Solo(s) and that's a good thing.
 
Top Bottom