• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

Shrike

Flower Potted, Maxed, & Rio'd.
^^^says this when I clicked on the link..."Oops,an error occurred."
 
Shrike,

Vaporware

Well-Known Member

The whole handle system really looks great now! I’m glad you kept testing and refining it after the first design. Definitely buying one or more soon. :rockon:

I’ll buy it either way, but I’m curious, does the dabber end get very hot when it’s on a carb cap that’s left on the FlowerPot for a little while, or does this design minimize the heat transfer that end?

I’m not familiar enough with heat transfer through wood wrapped metal (especially with the minimized wood-metal contact in this design) to know how quickly heat should make it to the other end.
 
Vaporware,
  • Like
Reactions: Summer

Chris_CH

Company Rep
Company Rep
The entire assembly is indeed metal so the dabber end will get hot still. Not sure if it delays it, but for some reason i doubt it...now this is speculation. Only Ed really knows at this point. Hes the mad genius.

The whole handle system really looks great now! I’m glad you kept testing and refining it after the first design. Definitely buying one or more soon. :rockon:

I’ll buy it either way, but I’m curious, does the dabber end get very hot when it’s on a carb cap that’s left on the FlowerPot for a little while, or does this design minimize the heat transfer that end?

I’m not familiar enough with heat transfer through wood wrapped metal (especially with the minimized wood-metal contact in this design) to know how quickly heat should make it to the other end.
 

chaos_theory

The Dude abides
Very nice! Going to look out and get one of those handles for sure.

Anyone still having issues with getting a ring with still green flower in the middle of the bowl with the vrod rev b? I've tried less in the bowl and I really don't like higher temps. I usually set at 585 and will hit multiple times really enjoying the flavors. I know the uneven ring on the flower has been covered extensively here especially with the vrod but I still can't seem to get a handle on it.

Other than that, still loving my rig and I show it off whenever I can. Hell I even get free bud out of it from a friend who constantly gets new strains and wants to use it just so he can taste it!
 

EmDeemo

ACCOUNT INACTIVE
Very nice! Going to look out and get one of those handles for sure.

Anyone still having issues with getting a ring with still green flower in the middle of the bowl with the vrod rev b? I've tried less in the bowl and I really don't like higher temps. I usually set at 585 and will hit multiple times really enjoying the flavors. I know the uneven ring on the flower has been covered extensively here especially with the vrod but I still can't seem to get a handle on it.

Other than that, still loving my rig and I show it off whenever I can. Hell I even get free bud out of it from a friend who constantly gets new strains and wants to use it just so he can taste it!

What glass are you using? Is it a chugger? Whats your inhale speed? Capped or uncapped?

Give us ya parameters, buddy! :)
 
EmDeemo,

chaos_theory

The Dude abides
Haha fair enough!

I have the 12.5" stereo matrix from newvape site. I do a slow steady draw uncapped mostly, but have tried capped. The rig is larger than my others and being a wider 18mm I feel the slower draw helps to get a nice hit for me. Otherwise it's just not extracting enough it seems.

I have smaller rigs that are more dab style and those I draw a bit faster but I seem to still have the issue.

My only current guess is maybe I'm packing too much flower?
 
chaos_theory,
  • Like
Reactions: EmDeemo

PandaLee

Well-Known Member
Anyone still having issues with getting a ring with still green flower in the middle of the bowl with the vrod rev b? I've tried less in the bowl and I really don't like higher temps. I usually set at 585 and will hit multiple times really enjoying the flavors. I know the uneven ring on the flower has been covered extensively here especially with the vrod but I still can't seem to get a handle on it.

I was away during that discussion, and now have the Vrod revb. Haven't paid too much attention to it, but have noticed the outside getting darker sometimes. I usually stir after each hit (gives me something to do as I recover from previous hit), so I never really looked into it. I'll test out different rigs and methods tonight to see when it happens most for me.
 

Vaporware

Well-Known Member
Haha fair enough!

I have the 12.5" stereo matrix from newvape site. I do a slow steady draw uncapped mostly, but have tried capped. The rig is larger than my others and being a wider 18mm I feel the slower draw helps to get a nice hit for me. Otherwise it's just not extracting enough it seems.

I have smaller rigs that are more dab style and those I draw a bit faster but I seem to still have the issue.

My only current guess is maybe I'm packing too much flower?

I do up to about 3 scoops from NewVape’s loading tool, and that should fill the bowl, but I don’t pack it down or anything. If you have an *extremely* fine grind that might make it more difficult for the air to get consistently through everything, but other than that or being packed down too much I don’t think it could be a packing problem.

Generally though, to get vapor production faster you need to set the temp higher and/or cap at least the first part of the draw. The faster the extraction goes, the fewer draws you need to finish it.

If you do go to like 700 or higher though, you might want to load less. At 777 for example, I just cover the screen and use a medium draw ramping up to fast as vapor production starts, and it’s pretty quick.

I hope that helps!
 

Baron23

Well-Known Member
I do up to about 3 scoops from NewVape’s loading tool, and that should fill the bowl, but I don’t pack it down or anything. If you have an *extremely* fine grind that might make it more difficult for the air to get consistently through everything, but other than that or being packed down too much I don’t think it could be a packing problem.

Generally though, to get vapor production faster you need to set the temp higher and/or cap at least the first part of the draw. The faster the extraction goes, the fewer draws you need to finish it.

If you do go to like 700 or higher though, you might want to load less. At 777 for example, I just cover the screen and use a medium draw ramping up to fast as vapor production starts, and it’s pretty quick.

I hope that helps!
Yep...I'm 700 with about .15 g as a load (1 and 1/2 of a NV scoop with fine grind...so, maybe up to .2 g). I would rather reload more often (easy peasy with a FP) that slog through too big of a load long after taste is gone. And, i think I get more even extraction but that's all subjective opinion.

Cheers
 

chaos_theory

The Dude abides
Cool thanks for the help all. I'm going to experiment again with loading less and raising the temp maybe.

While I don't pack it down I do put a good amount in there and sometimes with higher temps it combusts the flower on the top of the bowl which is really close to the vrod.

I'll return with more results soon :rockon:
 

WelshBrok

Well-Known Member
I’m at about 3/4 of a Nv scoop of medium/fine grind @ 570 on the auber capped with 2 SiC terp pearls and a revA vrod and I'm probably getting 3 full almost instant vapour hits (pretty long draw and fast enough to spin the pearls) and a bit of cleanup. I think the combo of cap and pearls is giving it a more even cook but it’s difficult to tell whether it’s the angled cap and/or pearls making the difference
 

Chris_CH

Company Rep
Company Rep
Fellas fellas, the handle is now up.

Fancy...if you ask me.

insulated_handle_3.jpg
 

EmDeemo

ACCOUNT INACTIVE
Cool thanks for the help all. I'm going to experiment again with loading less and raising the temp maybe.

While I don't pack it down I do put a good amount in there and sometimes with higher temps it combusts the flower on the top of the bowl which is really close to the vrod.

I'll return with more results soon :rockon:

Looks like the problem was found :) If you're packing that much in that the top of the load can scorch due to proximity to the FP head, then yeah, the dark ring is likely. If you push one variable to a bit of an extreme, another variable will have to be changed to accommodate, and expectations adjusted accordingly :) I usually push vapes to see their limits in similar ways :)

Out of interest, what reason do you have for large loads? That you dont wanna refill the bowl or that you have a fairly large tolerance?
 

Jblizz

Well-Known Member
Anyone here use their FP with a 10mm rig?

I’m currently using my weedeater on a 18mm tube with a matrix Perc and enjoy the experience. But I’m looking into getting a new heady piece and while I’m thinking of going with a 14mm, a 10mm rig has caught my eye. I’ve personally never hit a 10mm rig, but I’m worried the restriction may be an issue? I know many dabbers prefer 10mm, but flower is generally 14/18mm. Any input would be appreciated, thanks.
 
Jblizz,
  • Like
Reactions: mixchu69

EmDeemo

ACCOUNT INACTIVE
Finding it a bit tricky to get 8 SiC balls moving that easily, trying 6 instead. 6 seems just a tad easier to get it all moving.
 
EmDeemo,

thevapist

Well-Known Member
Yea, I commented on that after I got mine and experimented. I am still using 7 with the single angled hole VROD cap.
 
thevapist,
  • Like
Reactions: EmDeemo

Baron23

Well-Known Member
Anyone here use their FP with a 10mm rig?

I’m currently using my weedeater on a 18mm tube with a matrix Perc and enjoy the experience. But I’m looking into getting a new heady piece and while I’m thinking of going with a 14mm, a 10mm rig has caught my eye. I’ve personally never hit a 10mm rig, but I’m worried the restriction may be an issue? I know many dabbers prefer 10mm, but flower is generally 14/18mm. Any input would be appreciated, thanks.
Not me....I have mostly 14 mm but went in the other direction and generally use my 18mm stemless can glass for my Shower Head.

I seem to like a bigger rig with the SH.
 

wildything

Well-Known Member
Anyone here use their FP with a 10mm rig?

I’m currently using my weedeater on a 18mm tube with a matrix Perc and enjoy the experience. But I’m looking into getting a new heady piece and while I’m thinking of going with a 14mm, a 10mm rig has caught my eye. I’ve personally never hit a 10mm rig, but I’m worried the restriction may be an issue? I know many dabbers prefer 10mm, but flower is generally 14/18mm. Any input would be appreciated, thanks.
Yes 10mm rigs work(I use an 18mm glass bowl and 10mm adapter tho).

I dont usually notice too much restriction but I also use the 10mm glass for flavor so I tend to take smaller hits than using a larger tube.
 
wildything,

EmDeemo

ACCOUNT INACTIVE
Yea, I commented on that after I got mine and experimented. I am still using 7 with the single angled hole VROD cap.

Two hole carb cap here, but I also have a one hole. The difference between the two in how easy it is to get balls moving is quite large, so I'd hoped it might make 8 usable, but not really.

Maybe one more hole in my carb cap might do it, a three hole cap, but then I suspect there will start being a trade off with having too much airflow etc
 
Last edited:
Top Bottom