• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

PipeScents Portable Convection Vaporizer - Ed's TnT

Ed's TnT

Woodsman
Manufacturer
Like anything else I do it started off going one direction and can quickly veer off course and into something I hadn’t even considered. So, after an attempt at a Lotus stem body and some modifications by an innovative tester and a few betas down the line I am happy to be able to offer the PipeScents Portable convection Vaporizer. The PipeScents is a beautifully hand turned and American made addition to my product line up.

I am releasing it in Cocobolo and Blackwood for the time being. Both are some of the world’s finest woods and have always been my top favorites to work for any project.
PipeScents%20Cocobolo%20-%20Ed's%20TnT-500x500.png

PipeScents is a flame powered vaporizer. It doesn’t need a battery or an electrical outlet, any torch lighter will do. It’s just under 6" in length, has a glass heat intake, intake wood adapter, and lower stem body with a large load area. Every PipeScents will also come with high temperature orings, conical screens, SS heat retention disc, tin of Bomb Ass Butter as well as instruction manual.
PipeScents%20Blackwood%20%20-%20Ed's%20TnT-500x500.png

It has been put through its paces and found to be a heavy hitter and called by one user a "Lung Buster". I am eager to get these out there in the hands of users to see and hear how they work for them.

Also have a user demo video you can find here


You can find it here at my site - https://edstnt.com/index.php?route=product/product&path=89&product_id=182
 
Last edited:

EVlL 55

Well-Known Member
...i picked up one of these beautiful vapes in the blackwood persuasion.
...very well crafted pieces w/ excellent fittings and a nice deep bowl.
...it takes..or it took me a few loads & a few lung fulls of combustion to get where it should be.
...but once i got it dialed in it was good to go.
It hits hard...its a pretty short..direct path.
...its very user friendly and intuitive...very streamlined appearance and feel...nice device.
 

Vaporware

Well-Known Member
Congrats on the release! I’ve been watching the thread in the unreleased section, and of the vaporizers that use directly torch-heated air I’ve seen this is the one I’m most interested in.

I don’t remember seeing it mentioned, but does it fit into 14 and/or 18mm glass well? If not, you might consider making some that do. :)
 

Ed's TnT

Woodsman
Manufacturer
Hello,

@Gigsabits53 Thank you

@EVIL 55 I only did a few in BW, those were really nice pieces, good score! I am glad to hear you were able to get right and enjoy it. Thanks for posting up and letting us know. I hope you enjoy it for a while to come.

@VaporWare Thank you. I didnt mention it and thanks for reminding me to do so. It does taper to 14mm at the mouth piece end so it could be used with any of your favorite water tools.

I hope I have been helpful and thank you all for your interest in this new piece.
 

F-UCTD

Well-Known Member
Ed if I wasn't buying a Ghost MV1 tomorrow I'd order one. But it will be a while till I can buy another vape after that dent in my wallet.
 
F-UCTD,
  • Like
Reactions: Ed's TnT

Fat Freddy

FUCK CANCER TOO !
Like anything else I do it started off going one direction and can quickly veer off course and into something I hadn’t even considered. So, after an attempt at a Lotus stem body and some modifications by an innovative tester and a few betas down the line I am happy to be able to offer the PipeScents Portable convection Vaporizer. The PipeScents is a beautifully hand turned and American made addition to my product line up.

I am releasing it in Cocobolo and Blackwood for the time being. Both are some of the world’s finest woods and have always been my top favorites to work for any project.
PipeScents%20Cocobolo%20-%20Ed's%20TnT-500x500.png

PipeScents is a flame powered vaporizer. It doesn’t need a battery or an electrical outlet, any torch lighter will do. It’s just under 6" in length, has a glass heat intake, intake wood adapter, and lower stem body with a large load area. Every PipeScents will also come with high temperature orings, conical screens, SS heat retention disc, tin of Bomb Ass Butter as well as instruction manual.
PipeScents%20Blackwood%20%20-%20Ed's%20TnT-500x500.png

It has been put through its paces and found to be a heavy hitter and called by one user a "Lung Buster". I am eager to get these out there in the hands of users to see and hear how they work for them.

Also have a user demo video you can find here


You can find it here at my site - https://edstnt.com/index.php?route=product/product&path=89&product_id=182

And replacement glass?

.
 
Fat Freddy,
  • Like
Reactions: Ed's TnT

Ed's TnT

Woodsman
Manufacturer
And replacement glass?

.

Good evening, sorry for the delay. I have replacement heat intakes at my site here

https://edstnt.com/index.php?route=product/product&path=60_91&product_id=184

I have also begun sending a new flame displacement disc or concave SS solid filter disc instead of the SS heat retention disc. Have gotten a couple out for testing and heard back very positive findings.

PS-Heat-displacement-disc-Ed-s-Tn-T.jpg


PS-Heat-displacement-disc-2-Ed-s-Tn-T.jpg


There are those that are very familiar with torch powered vapes and know the PS and others well enough to perform with no issues of combustion but have heard from a couple users that they were getting vapor but possible combustion as well. These take the full force of the flame and disperse it giving it less of a chance of combustion.

Have several of these available is some of the finest two tone Cocobolo ive made yet.
 

IAmKrazy2

Darth Vapor
Decided i needed to order one if these beautiful little vapes. Seems to be a fair price too. Will report back eventually.

Also... And this comes as no surprise to most, Ed always provides top notch customer and i want to mention that again here. Been a customer of his for many years, and he has been A1 since day one.

Cheers all.
 

IAmKrazy2

Darth Vapor
Decided i needed to order one if these beautiful little vapes. Seems to be a fair price too. Will report back eventually.

Also... And this comes as no surprise to most, Ed always provides top notch customer and i want to mention that again here. Been a customer of his for many years, and he has been A1 since day one.

Cheers all.

Bad spell check all. I missed the word "service". Sorry!

*Ed always provides top notch customer service.
 

IAmKrazy2

Darth Vapor
Had this one for a week or two, and really enjoy having it in the lineup.

First off... It is fucking beautiful. As always from Ed the finish is top tier and he paid great attention to detail. Really a showcase vape as far as appearance. Love the pipe feel and look.

Although not as forgiving as something like Daisy or StickyOG with some practice this can be a huge consistent vapor producer that provides the huge hits on just a little pinch of herb.

I also love the portability. It came to the movie theater with me the other day and was my go to car vape before we checked out IT 2.

Personally i have settled on using the dissplacer disks to allow the process to be a little more forgiving.

How are others liking theirs?
 

Ed's TnT

Woodsman
Manufacturer
Good morning everyone, I am sorry I have been neglecting this thread. I have been slammed with all as usual and have let things slide, my bad.

@IAmKrazy2 Forgive me bro, I appreciate your comments very much and your support over all the years but doesnt look good me getting back to you so late on this. I am really glad to hear you were enjoying it and hope thats still the case. I would like to hear more and hope to. I hope all is well bro.

@Adobewan My man I hope all is well for you.

@Ramahs Bro if there is anything I can do pls let me know, sorry for the delay.

@FlyingLow Sorry for this delay to you also. Yes sir this is how this started out initially but it didnt end up that way. This piece is designed as it is to work stand alone.

Our guy @antispleen got one of these the other day and posted some great videos at IG I grabbed and wanted to share here for you all to see his experience.


BTW yall, I have begun running the 3rd Annual Make A Wish Fundraiser/Raffle where you can get more info at my blog. The Grand Prize is valued at $2500 to be awarded to one winner with 18 runnerup prizes to also be awarded. There are so many pieces that make up this wonderful GP and yall know its all about the kids and what the MAW foundation does for them. Pls pls have a look here at my blog

https://edstnt.com/index.php?route=extension/d_blog_module/post&post_id=50

I hope you all will take part in this event and lets make this a great success.
 

GoldenBud

Well-Known Member
Good morning everyone, I am sorry I have been neglecting this thread. I have been slammed with all as usual and have let things slide, my bad.

@IAmKrazy2 Forgive me bro, I appreciate your comments very much and your support over all the years but doesnt look good me getting back to you so late on this. I am really glad to hear you were enjoying it and hope thats still the case. I would like to hear more and hope to. I hope all is well bro.

@Adobewan My man I hope all is well for you.

@Ramahs Bro if there is anything I can do pls let me know, sorry for the delay.

@FlyingLow Sorry for this delay to you also. Yes sir this is how this started out initially but it didnt end up that way. This piece is designed as it is to work stand alone.

Our guy @antispleen got one of these the other day and posted some great videos at IG I grabbed and wanted to share here for you all to see his experience.


BTW yall, I have begun running the 3rd Annual Make A Wish Fundraiser/Raffle where you can get more info at my blog. The Grand Prize is valued at $2500 to be awarded to one winner with 18 runnerup prizes to also be awarded. There are so many pieces that make up this wonderful GP and yall know its all about the kids and what the MAW foundation does for them. Pls pls have a look here at my blog

https://edstnt.com/index.php?route=extension/d_blog_module/post&post_id=50

I hope you all will take part in this event and lets make this a great success.

The "stem" is longer than I thought (lol) how long is it? 6''?
massive clouds it seems ..
 
Top Bottom