710 coils
- Thread starter 710Coils
- Start date
-
- Tags
- coils concentrates enail
ensabbahnur
Hash Vacuum
Start low, maybe around 450-500 and work your temps up until your happy with the quality/quantity ratio of the vapor.
With 710 coils gear you can leave the banger and coil mated at all times (minus maybe cleaning) and you will be totally fine.
Keep it clean and qtip after every dab and youll love never have any issues, unless maybe your into "dirtier" rosins or something.
bizwaxzion
Enigmatic Cannabist
@tepictoton He finished them and they are on the way here. Once they land I will put them up for sale on my site. I have also gotten skillet tools and will be adding them to the site soon =)
Lastly, I have purchased some of Disorderly conductions budget controllers to sell. They are actually solid units and the price point is better than Aubers.
Hope everyone is having a great day
Your ever loyal coil and quartz monger
Shane
Lastly, I have purchased some of Disorderly conductions budget controllers to sell. They are actually solid units and the price point is better than Aubers.
Hope everyone is having a great day
Your ever loyal coil and quartz monger
Shane
tepictoton
Well-Known Member
Ok, got a friend on the fence for the auber plus your coil and banger.
So I will tell him to hold of a bit.
They do run on 220v?
So I will tell him to hold of a bit.
They do run on 220v?
@tepictoton They do =) You just need the plug adapter and thats it =)
Kanna_Kult
Well-Known Member
@710Coils i thought the budget units were $100 which is also what I thought the Auber RDK-300 was down too as well. Do you feel these units preform any better?
EDIT: to be clear I mean do you think the disorderly conduction unit preform better than the RDK or about the same ?
@Kanna_Kult The Aubers are up in price and end up being 120 to 130 shipped. The Budget disorderly units will be 110 shipped and honestly perform on par with the Auber. You cannot access the setting on the disorderly units like you can on the Aubers. But most dont mess with the settings since the units work great out of the box.
So happy with my new 710coils.com setup! Played with the "naked" opaque 25mm banger and Pi cap (perfect seal), then with the slitted insert, then added one Lil SiC pearl that Shane so generously included. Wow, all this extra stuff really does make the hit stronger and tastier. Only used one pearl Cuz I just know Ima lose these lil suckers!
If it's possible to have a dab hangover I sure got one today.
If it's possible to have a dab hangover I sure got one today.
I have gotten skillet tools added to the site and have been building the bundles that will be live soon
Here is a bit of info on the bundles:
“Keep It 100” Coil and Banger
“TriForce” Coil, Banger, and Clear Quartz Pi Cap
“The Kitchen Sink” Controller, Coil, Banger, Clear Quartz Pi cap, Skillet tool, Terp Pearls and tweezers
The above have a discount built into them ranging from 5.00 to 23.00
I will also be posting some 710 swords custom titanium dab tools. There is a mix of swords, spears, and spoons =)
Its also looking like 30 or so days and I will have a small batch of 25 and 30mm ruby inserts. They will be close to the specs of the Adaptech inserts and will be under 100.00 a pop (Hoping to have this closer to 80.00)
I have also been working on expanding my wholesale side of things and am ready to sling bangers and coils to any shops interested =)
Hope everyone is having a great weekend
Your ever loyal coil and quartz monger
Shane
Here is a bit of info on the bundles:
“Keep It 100” Coil and Banger
“TriForce” Coil, Banger, and Clear Quartz Pi Cap
“The Kitchen Sink” Controller, Coil, Banger, Clear Quartz Pi cap, Skillet tool, Terp Pearls and tweezers
The above have a discount built into them ranging from 5.00 to 23.00
I will also be posting some 710 swords custom titanium dab tools. There is a mix of swords, spears, and spoons =)
Its also looking like 30 or so days and I will have a small batch of 25 and 30mm ruby inserts. They will be close to the specs of the Adaptech inserts and will be under 100.00 a pop (Hoping to have this closer to 80.00)
I have also been working on expanding my wholesale side of things and am ready to sling bangers and coils to any shops interested =)
Hope everyone is having a great weekend
Your ever loyal coil and quartz monger
Shane
Sign me up for one of those 30mm inserts please!
Easy dude just realised i know who this is. Ita glass charlie btw. Big up your business couple my buddies are rocking your coils and sure i will once ive got somewhere to put it. Hopefully catch you in september dude!
roboticnightmares
Well-Known Member
I just discovered 710coils. So excited to try your gear. Can anyone explain any advantages from using the slitted insert vs regular insert? Do the slitted ones just provide a better grip with tweezers or is it something else?
@roboticnightmares Welcome to the party =)
Non slit inserts are shorter and sit below the neck of the banger, where the slit version lines up with the neck. The slit is supposed to allow air to pass through the slit instead of over the top and it was supposed to help reduce the dab from splashing into the neck. The slit version is the highest seller since most prefer the extra height and also use the slit to grab the insert when taking out of the banger. If you are torn and want to try them both. Just let me know and I can swap one of the 2 for the other style so you would have one slit and non slit =)
We have a giveaway going till the end of the month on Instagram for a coil and banger. Next month we will be giving away another complete setup and I hope all of you enter. Really easy to get in on and we have had a few winners from the FC fam so far and this makes me sooo very happy!!!!
Hope everyone is having a great weekend =)
Your ever loyal coil and quartz monger
Shane
Non slit inserts are shorter and sit below the neck of the banger, where the slit version lines up with the neck. The slit is supposed to allow air to pass through the slit instead of over the top and it was supposed to help reduce the dab from splashing into the neck. The slit version is the highest seller since most prefer the extra height and also use the slit to grab the insert when taking out of the banger. If you are torn and want to try them both. Just let me know and I can swap one of the 2 for the other style so you would have one slit and non slit =)
We have a giveaway going till the end of the month on Instagram for a coil and banger. Next month we will be giving away another complete setup and I hope all of you enter. Really easy to get in on and we have had a few winners from the FC fam so far and this makes me sooo very happy!!!!
Hope everyone is having a great weekend =)
Your ever loyal coil and quartz monger
Shane
StormyPinkness
Rhymenocerous ʕ•ᴥ•ʔ
Anyone doing hash in their banger? Curious if it works and what temp to set it at. I saw some videos on youtube, but they were torching and I'm not sure what the temp was.
Kanna_Kult
Well-Known Member
I’ll do some really high grade stuff but anything that leaves any char I’d use SiC or ruby, hash seems to make my quartz Chaz faster
b0
Cloudy...
The only hash I dab is 6 star, anything else will leave residue and make your quartz chaz faster.
For other qualities of hash I think is better to just press it and make rosin if you wanna dab it.
I am going to setup a pre order on my site for the 30mm Ruby inserts and wanted to let everyone know. They sound like they will be here in a few weeks or less and the specs for them are:
30mm insert:
22mm wide
20mm tall
2.5-3mm thick side walls and base
Price will be 100.00 shipped domestic
I will also be messaging everyone that hit me up earlier as I have them on a list and will hold inserts for them until I confirm if they want in on this batch or not =)
Hope everyone is having a great day
Your ever loyal coil and quartz monger
Shane
30mm insert:
22mm wide
20mm tall
2.5-3mm thick side walls and base
Price will be 100.00 shipped domestic
I will also be messaging everyone that hit me up earlier as I have them on a list and will hold inserts for them until I confirm if they want in on this batch or not =)
Hope everyone is having a great day
Your ever loyal coil and quartz monger
Shane
StormyPinkness
Rhymenocerous ʕ•ᴥ•ʔ
I've been waiting for this day, 30mm ruby insert is pre-ordered. It'll be my first time trying ruby or sapphire inserts, I'm looking forward to it.
I was so excited I almost ordered one of the pomegranate quartz pi caps I keep drooling over.
I was so excited I almost ordered one of the pomegranate quartz pi caps I keep drooling over.
Roth
Pining for the Mountains
I've been waiting for this day, 30mm ruby insert is pre-ordered. It'll be my first time trying ruby or sapphire inserts, I'm looking forward to it.
I was so excited I almost ordered one of the pomegranate quartz pi caps I keep drooling over.
Ha, I went through the exact same thing! That 30mm pomegranate almost made it into my basket several times! If I didn't have a perfectly functional and wonderful 30mm Potion cap staring at me right now, might have ordered it!
That red is gorgeous, and would be PERFECT with the ruby insert!
Can't wait to try my new insert!
Last edited:
So I wasn't able to get an actual 30mm sample and based my specs off of what I felt would be a safe fit. Once I have one of the inserts to test, I can figure out what to adjust and will tweak the second round of these as needed. The current specs are basically my 30mm slit insert measured from the bottom of the slit to the bottom of the insert. That's roughly 20mm. I also asked for 2.5 to 3mm sides and base as I felt this would be beneficial in heat retention.
I think these are going to be pretty damn sweet and will fill up my 30mm banger nicely with all that luscious Ruby goodness =)
Feedback is always welcome especially when its something that most manufacturers are steering clear of while the path gets forged. I know @biohacker prefers a shorter insert and would be interested in hearing his thoughts on optimal specs for the 25 and 30mm ruby inserts
Hope everyone is having a great day
Shane
I think these are going to be pretty damn sweet and will fill up my 30mm banger nicely with all that luscious Ruby goodness =)
Feedback is always welcome especially when its something that most manufacturers are steering clear of while the path gets forged. I know @biohacker prefers a shorter insert and would be interested in hearing his thoughts on optimal specs for the 25 and 30mm ruby inserts
Hope everyone is having a great day
Shane