hujdimislav
Well-Known Member
hello,
im bit late but ice steam will be available in epicvape.com once again ?
greeeetings
They are still there.
E-Nano from Epickai
They are still there.
beiberhole69
Sexual Maven
Faaaaaaaak! I just made a big mistake
Was doing concentrates in bed and tipped my nano over and it touched my remote and mlted to the core!!!!
Plastic is all stuck in the mesh. Maybe a torch and something? IDK, I don't want to be breathing in plastic fumes.
Was doing concentrates in bed and tipped my nano over and it touched my remote and mlted to the core!!!!
Plastic is all stuck in the mesh. Maybe a torch and something? IDK, I don't want to be breathing in plastic fumes.
caliganja420
Well-Known Member
Just got this beauty, exotic wanut
. She is a damn beauty. Really missed the nano since i gave my old one to my sister about a year ago. 2-3 hits and its fully extracted on 7. Ice stem and e-pick on the way. Really dark abv with this unit, unlike any other vape ive had. (Maybe the evo) Cheers to the epic team
BabyFacedFinster
Anything worth doing, is worth overdoing.
Just got this beauty, exotic wanut
Cheers to the epic team
Very nice nano! and stand. You now have a solid home base to go with your portables.
Under that situation I would consider spending the money and sending it back to epicvape for a refurbish.
Baron23
Well-Known Member
Yep....I would send it back to Epic and request a repair with installation of a new cartridge heater. I don't think you will ever get all of the plastic off of the one you have....but I may well be wrong.
ataxian
PALE BLUE DOT
Look’s fun!Found an old Piece from way back from the combustion days...several rinses and cleaning and I got it pretty clean again! It's really cool, very little water needed and icecatcher as well haha
Tastes great but I think I probably won't use the ice cubes next time because they make the inhalation cold, or...colder than needed.
Happy weekend nanoites!
NANO = FUN
midnight rider
Well-Known Member
hi all
hope i am following protocol as where to post, etc
bought an enano recently from puffitup
got this very cool tool with it
not sure if a freebie from epicvape or piu
looked on both sites and neither has exact same tool
can anyone clue me in on where to get one of these? thanks
hope i am following protocol as where to post, etc
bought an enano recently from puffitup
got this very cool tool with it
not sure if a freebie from epicvape or piu
looked on both sites and neither has exact same tool
can anyone clue me in on where to get one of these? thanks
Last edited:
Chaos47
Well-Known Member
midnight rider most likely it came from PIU as the E-nano comes with the E-pick
Looks like a cheap "dab" tool.
Check ebay / amazon for "earwax curette"
Looks like a cheap "dab" tool.
Check ebay / amazon for "earwax curette"
StringTheorista
Well-Known Member
Ice stem arrived today. Excited to try it out this evening
StringTheorista
Well-Known Member
my edit window closed in my previous post. Is this a new feature?
Anyway, I love the Ice stem! Nice cool delicious vapor. Feels like it cools more than the spiky-indents style of cooling stem. Plus, I’m enjoying the marbles clinking back and forth (using it level).
Now I want a similar stem for my Solo II...
Anyway, I love the Ice stem! Nice cool delicious vapor. Feels like it cools more than the spiky-indents style of cooling stem. Plus, I’m enjoying the marbles clinking back and forth (using it level).
Now I want a similar stem for my Solo II...
Logic
Old Skool Member ‘10
The edit option goes away after 4 hours, I believe.
So how does the ice stem work? Is it like those glycerin coils attachments you can buy where you just throw them in the freezer for awhile?
StringTheorista
Well-Known Member
No, “ice” is metaphorical. It’s a borosilicate glass stem filled with 10 or 11 borosilicate marbles. These both add turbulence, which cools the vapor, and also maybe absorb heat themselves, which would be like them sucking heat from the vapor as it passes by. I don’t know for sure. But it works, and you don’t have to chill it before use.
Last edited:
midnight rider
Well-Known Member
did get the e-pick and like the sharp grinder they have on that nowhi all
hope i am following protocol as where to post, etc
bought an enano recently from puffitup
got this very cool tool with it
not sure if a freebie from epicvape or piu
looked on both sites and neither has exact same tool
can anyone clue me in on where to get one of these? thanks
found product you mentioned on ebay, thanks
i don't think i would have the nerve to gouge my earwax out with it
We've had the limited edit window for many years actually. Way back in the day, you could edit your post no matter how old they were. We learned our lesson when a manufacturer decided to remove the content from each and every post they had ever made (paranoid lawyer's advice I'm sure) making the entire thread for their product essentially unreadable. After that we put in the limited time edit window.
It's six hours actually.
StringTheorista
Well-Known Member
Thanks Stu! I guess I just never bumped against it before so I was blissfully ignorant. 
KurtSmoooth
Well-Known Member
Howdy all, Im new here on FC. Had my e nano for well over a year now and its my go to daily driver when at my desk.
Seems that a few others also are diggin the matrix sidecar for glass and it hits nice with the e nano.
Seems that a few others also are diggin the matrix sidecar for glass and it hits nice with the e nano.
StringTheorista
Well-Known Member
snappypappy419
New Member
New to FC. So do y'all just learn to live with the crack? I've already sent it in for repair once for this
Also I don't get the whole photo upload thing...
Also I don't get the whole photo upload thing...
Last edited:
GetLeft
Well-Known Member
The crack doesn't bother me, but I never really see my nano anyway (it stays tucked out of view). One day I'll send it in for an esthetic upgrade. Might be a few years yet before it finds its way into the light. I think I read several pages back that epcivape was about to implement a change of design to limit the expansion of the metal that can contribute to the cracking.
I've been using tinypic.com for images.
StringTheorista
Well-Known Member
Postimages.org is an easy photo site too. After you upload a pic, it offers multiple different kinds of links. Choose “direct link”, then touch the little photo icon at the top of your FC comment box, and paste that link into the box. Then touch “insert” button in that window, and it will paste the image into your post.
https://postimages.org/
https://postimages.org/
scooterboy
Muppet, not moped.
Can't speak to the crack, as mine has yet to (after 15 months of being on 24/7).New to FC. So do y'all just learn to live with the crack? I've already sent it in for repair once for this
Also I don't get the whole photo upload thing...
But I do love your avatar - Karl rules!
BabyFacedFinster
Anything worth doing, is worth overdoing.
I just ordered one now.
howie105
Well-Known Member
Here you are again, so first hello and welcome to the show and compliments for your tastes in vapes. For split wood there is always the DIY hose clamps and wood glue option but sending it back is a bit easier.
Gray Area
Well-Known Member
I've lived with the crack in mine for 5 years... I like it
Add's a bit of character imo
Can't see your pics though, so dunno how bad your crack is (one for the out of context thread). Mine runs from the top, all the way through the wood rim, and runs about 2/3 down the side (I'll try to snap a pic later).
Happened within a month or two of getting it.
It was a third party exotic blank though, so no blame lies with Epicvape for the crack...