Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
Xclerk
The Universe is our endless supply
Genius!
SS works too but just gold, then? Cheeky S.O.B said red-ish. I did not want to push my luck
Thanks for the shout out @StringTheorista
cawshook
Solod out.
Is the M with the dynacoil good for really crumbly concentrate, like sometimes disintegrating into sand-like consistency? Im guessing no, because it'll just fall out? im thinking the maud dib box is my best option, but would appreciate any suggestions. i dont usually use concentrates, and when i do i usually use one of those pens, but i want to upgrade.
Vaporware
Well-Known Member
You can heat the coil up before loading and that should help melt it into the coil and keep it there.
I prefer to use concentrates that vaporize pretty completely with it though rather than something that tends to leave a lot of residue behind so I don’t have to clean it all the time, so you you know how cleanly what you have vaporizes that might help you decide. I don’t know too much about the muad dib though, so I don’t know how they compare.
I prefer to use concentrates that vaporize pretty completely with it though rather than something that tends to leave a lot of residue behind so I don’t have to clean it all the time, so you you know how cleanly what you have vaporizes that might help you decide. I don’t know too much about the muad dib though, so I don’t know how they compare.
D4Dank
Well-Known Member
Hey everyone. Been Lurking for a while and Somewhat new dynavap owner(2019m) and was hoping to get some help on here with any tricks or tips you have on using this bad boy. I was also hoping to upgrade the body to a dark wood one with a spinning mouthpiece(if anyone could offer some advice on how or where to get it from) thanks 
Last edited:
so, I dont recognize that brass thingie from back in the day...would you offer some info thanks danieljVintage 20th Century VapCap “stem”
A blast from the past Century
D4Dank
Well-Known Member
Sorry for such an old bump but where did you get that body for the dynavap? Does the moth piece spin?@StringTheorista the zigzag should mean the incoming air takes longer to enter the load which should mean a bit more convection but it'll be a tiny amount.
I've spent a lot of time using both Ti and SS and I like them equally.
The Shadow M is my favourite for cleanliness and I mentioned to George it was kind of non stick, just need to persuade him to do a black 7 fin SS now.
Down in Southern Spain for a few days toking on some Zkittles.
Got my stem and IH through customs again.
Pulled over leaving the UK and the nice lady had a quick look at the Lipo safe bag and didn't bat an eye lid.
@stark1 that brass cigarette holder is awesome!! But you have to wear some Gatsby Sear Sucker Suite when you smoke it.
@D4Dank thats a @phattpiggie stem. You can find his amazing work here on FC
You can probably find what you are looking for at:
Dynavap: https://www.dynavap.com/dynashop/parts
Vgoodiez: https://vgoodiez.com/collections/dynavap Look at Ed's section
@danielj also makes really beautiful stems and mouth pieces.
@mrb works with Ti
Welcome!
Also, It can be a little confusing at first what fits with what, people here can help and Cheeky S.O.B. has some cool tips and hacks.
https://www.youtube.com/channel/UCnkknQyBiN7CQ5sZZpXrx4g
@D4Dank thats a @phattpiggie stem. You can find his amazing work here on FC
You can probably find what you are looking for at:
Dynavap: https://www.dynavap.com/dynashop/parts
Vgoodiez: https://vgoodiez.com/collections/dynavap Look at Ed's section
@danielj also makes really beautiful stems and mouth pieces.
@mrb works with Ti
Welcome!
Also, It can be a little confusing at first what fits with what, people here can help and Cheeky S.O.B. has some cool tips and hacks.
https://www.youtube.com/channel/UCnkknQyBiN7CQ5sZZpXrx4g
D4Dank
Well-Known Member
Thank you for the reply. Getting used to the layout of the forum but I’ll fefinitely look into those users you’ve recommended
warren0728
Well-Known Member
well i finally got some condensers from dynavap and built my new xls with my new mrb stem and mrb wooden spinning mouthpiece! i love it just like i love my first mrb stem!
stark1
Lonesome Planet
Not to forget our own SDS, @stardustsailor, recently gone missing: NDS (New Dad Syndrome)? Carbless Ti stems
@danielj, I believe @RogueGuy nailed it, spot on.
Last edited:
Xclerk
The Universe is our endless supply
Oh man oh man oh man! I just got 3 pqckages not intended for today ...my screen tool and tips from danielj. ( tool is way heavier than I expected. Super well done) my pipes induction heater and a spare ti tip and cap somone basicly gave me just charged shipping. It's an awesome world....its playtime...gna Do my best to get some pics and details up later. Super happy. Prob wont make it 2n lol. Plan on giving another 1 away this weekend to friends still combusting.
SquanchKava
Well-Known Member
Having fun with this little taster tonight that I ordered off of ebay after seeing the post about using a Grav Lab as a stem. I must of bought the wrong kind as you can't slide a condenser in it as the the top and bottom holes are different sizes. Slightly awkward to roll because of the glass stopper, anti-roll piece but not bad. It doesn't cool the vap as much as a thicker glass would, but not harsh either, and gives a big cloud. Cute little piece for $9.
Xclerk
The Universe is our endless supply
I have the same collection. Got about a dozen that fit. Glad you ended up w one that fit. A bunch a cool graphics on those little guys No condensers or carbs on these just a hard hitting glass hitter! If anyone wants one I also have them for Around 9 bx lolHaving fun with this little taster tonight that I ordered off of ebay after seeing the post about using a Grav Lab as a stem. I must of bought the wrong kind as you can't slide a condenser in it as the the top and bottom holes are different sizes. Slightly awkward to roll because of the glass stopper, anti-roll piece but not bad. It doesn't cool the vap as much as a thicker glass would, but not harsh either, and gives a big cloud. Cute little piece for $9.
cawshook
Solod out.
thanks for taking the time to reply. i have one more question to whoever is willing to answer. I was thinking about it, and for the crumbly concentrates I have, I would probably be better off just sandwiching it between some flower and using the designated screen instead. Im wondering what people's experiences have been like when mixing concentrates and flower in the Vapcap...
@SquanchKava I'm all Kavad up and feeling good. Nice stem. Too bad the little ball is not on the other end.
SquanchKava
Well-Known Member
Shells Up, Bula! Love a few puffs CBD flower or full green and a few shells of Kava. They play so nice together. Yeah at the other end or no ball at all.
Wow, then I did get rell lucky it fit. I love the dark blue and owl graphic.
Last edited:
stark1
Lonesome Planet
Like @SquanchKava, I too find that when one end doesn’t fit, the other end sometimes does;
The anti-rolling glass ball “is” in the “right “ place.
Looks like the VC tip fits in the mouthpiece of the chillum.
A pragmatic, simple solution to the issue of fit on the 12mm tasters.
The anti-rolling glass ball “is” in the “right “ place.
Looks like the VC tip fits in the mouthpiece of the chillum.
A pragmatic, simple solution to the issue of fit on the 12mm tasters.
Dynalowrider
Well-Known Member
WPA hack.
I ordered, "silicone tips for stainless steel straws" The little silicone washers that retain the SS straws in the lid of SS cups like"Yeti"cups. They slide over the VC, and can be used to cover the "airport". If placed with the small side toward the mp, it will block off a 14mm female joint. I just leave it on the VC. I even use my "Silo" for EDC, just place in the cap of the "Silo". Easy to spin with it's larger diameter. If placed above the "airport" towards the cap,it works to block the "airport" during draw. Doc
I ordered, "silicone tips for stainless steel straws" The little silicone washers that retain the SS straws in the lid of SS cups like"Yeti"cups. They slide over the VC, and can be used to cover the "airport". If placed with the small side toward the mp, it will block off a 14mm female joint. I just leave it on the VC. I even use my "Silo" for EDC, just place in the cap of the "Silo". Easy to spin with it's larger diameter. If placed above the "airport" towards the cap,it works to block the "airport" during draw. Doc
@Dynalowrider cool idea. Are you just using the sleeve or does the mouthpiece fit and are you using it also?
I WANT TO BUY OR TRADE FOR VAPCAP PARTS. IF YOU HAVE SOMETHING HIT ME!!
I WANT TO BUY OR TRADE FOR VAPCAP PARTS. IF YOU HAVE SOMETHING HIT ME!!
Last edited:
Dynalowrider
Well-Known Member
I just use the washers, best glass adapter I have ever used. I also put hookah grommets in all my 14mm joints. Doc