Man who you tellin’? Mine came a day early n Friday but I was at work when it came and couldn't sign for it. Wife saved the weekend by picking it up from post office while I was at work Saturday!
You’re gonna freaking LOVE IT!!!
Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
You’re gonna freaking LOVE IT!!!
The dabber cap is used to hide the threads on the loading tools and dabbers when there not installed in your carb cap.
https://www.newvape.com/dabber-cap
https://www.newvape.com/dabber-cap
bizwaxzion
Enigmatic Cannabist
Thank you @NewVape710 for the 4/20 sale. I know you don't have to do it, but I appreciate the ability to save a few bucks. Got the weed eater on Saturday and spent some time getting aquainted. The flavor from this vape is top notch. I'm having to work on my draw a bit with all the air this vape can move - but it's been a blast so far. Have not tried temps over 700 yet - started around 625 and still climbing.
@bizwaxzion Thank you for the business. My weedeater is currently set to 575. It will take you around a week to get your draw strength dialed in and decide what temp works best for you. Try and allow the same heat up time each session in the beginning. There's alot of different variables with the flowerpot. Don't forget to try extra fine grind.
nodrog
Well-Known Member
Question about the grind. I've been using the SLX grinder which seems to create a pretty fine grind. But, I don't know if it qualifies as "extra fine". I just ordered a Weedeater last week, can't wait! I've been using the Mobius Flower Pot which is basically the same idea but a little more cumbersome (torch vs enail).
YaMon
Vaping since 2010
The dabber cap is used to hide the threads on the loading tools and dabbers when there not installed in your carb cap.
https://www.newvape.com/dabber-cap
Wow. OK.
Such a tiny detail, I never knew I needed these!
Consider these added to my next purchase already
Jblizz
Well-Known Member
I got my Weedeater late Friday and had some fun over the weekend. I’ve had mine set at 725 (glass bowl), which I believe is the same temp in the newvape instructional video. Maybe that’s on the high side, but I’m loving it; vapor certainly isn’t too hot and it fits with my vaping style (high temp, fast extraction) and draw speed (slow).
Reminds me of my bong smoking days of yesteryear when I’m milking my tube. I prefer quick extractions... I’ll experiment with lower temps to see how low I can go and obtain the same effect.
Now I need more accessories. Great job New Vape.
Reminds me of my bong smoking days of yesteryear when I’m milking my tube. I prefer quick extractions... I’ll experiment with lower temps to see how low I can go and obtain the same effect.
Now I need more accessories. Great job New Vape.
PandaLee
Well-Known Member
So I got all my Vrod parts in. After a few days of intense experimentation, I've got to say when vaping flower using the male attachments (into female jointed rigs) is much different effect then the other way around.
At 680 using a 14mm male jointed rig, I'm using no carb cap and almost cashing a medium-sized bowl with one hit. Nice big hit. Second smaller hit to finish off the avb.
At 680 using a similar but 14mm female jointed rig, I'm carb capping most the draw. Great first hit with more flavor, not nearly as dark after the first hit, and I get about two more decent hits. Carb capping them too.
Then I dusted off an old 18mm female jointed bubbler. Tried cleaning it best I could (still more work to be done, it used to be my daily smoker - just some hard to clean stains left, maybe need lime-off) AND wow it opened up even more. So now I'm looking for a new 18mm piece.
My two 18mm glass finalist: CCG SOL and Rattle Can
There's a couple ZOB glass rigs at the local smoke shop that look like they would rock, but they're between $150 and $250! If my tax refund hits my box next couple days, I may go this route. The other two would take 2 weeks or longer delivery.
EDIT: added one more 18mm to my list from DankGeek, it's on sale and 20% 420 code, comes out to $65. It has a tornado perc...looks like it would work well with big hits and flavor (twisting up that vapor might have some wonderful effects!)
At 680 using a 14mm male jointed rig, I'm using no carb cap and almost cashing a medium-sized bowl with one hit. Nice big hit. Second smaller hit to finish off the avb.
At 680 using a similar but 14mm female jointed rig, I'm carb capping most the draw. Great first hit with more flavor, not nearly as dark after the first hit, and I get about two more decent hits. Carb capping them too.
Then I dusted off an old 18mm female jointed bubbler. Tried cleaning it best I could (still more work to be done, it used to be my daily smoker - just some hard to clean stains left, maybe need lime-off) AND wow it opened up even more. So now I'm looking for a new 18mm piece.
My two 18mm glass finalist: CCG SOL and Rattle Can
There's a couple ZOB glass rigs at the local smoke shop that look like they would rock, but they're between $150 and $250! If my tax refund hits my box next couple days, I may go this route. The other two would take 2 weeks or longer delivery.
EDIT: added one more 18mm to my list from DankGeek, it's on sale and 20% 420 code, comes out to $65. It has a tornado perc...looks like it would work well with big hits and flavor (twisting up that vapor might have some wonderful effects!)
Last edited:
I do 650 as well. Sometime 675... I use the same temp for dabbing CBD isolate. (Showerhead)..have only been using my 18mm rigs so far...started @ 700 on 1st day, now down to 650...just covering bottom of screen 2-3 hits all flavorful...I’m in love...
At this temp you can really work the vapor with your draw speed. Those deep long hits that start slow and you see the tipping point where good vapor is made. And then from there you can clear it or you can modulate your draw for even more vapor while feeling the heat. ....that satisfying inhalation and exhale.
vapecat
Well-Known Member
Curious about this too. Is the WE uncappable then? Did I make a mistake ordering the WE over the Showerhead? Seems like perhaps the Showerhead is more versatile.. In which case, I'm not sure what the WE is offering over the Showerhead and why it would be a new introduction?
Well, the Showerhead is certainly more versatile considering the whole concentrate dish feature.
The WeedEater is a simple, affordable, minimal option for vaporists that prefer flower. It's not designed to be carbed.
The whole concept behind the WE was a less intimidating Flowerpot with less parts, a literal vapor version of a classic bong hit - pack your bowl, put the heater on top, and inhale.
LitPot
Active Member
Hey everyone I’m relatively new to this forum and was wondering if the setup below would work? I want to get the flower pot but after my haze square I’m a little nervous to spring a lot of money.
I was thinking of getting the flowerpot Weedeater build a bundle, link below.
https://www.newvape.com/flowerpot-weedeater-build-a-bundle
Plus the enail I linked below. Is this all I need to use the flower pot on my piece? (18mm female)
https://www.vapes.com/products/mini-enail-kit-w-20mm-heating-coil-and-universal-nail
Thank you all for your time and advice!
Lmk what your choices were when you got yours. Also, if you recommend anything else over these options.
I was thinking of getting the flowerpot Weedeater build a bundle, link below.
https://www.newvape.com/flowerpot-weedeater-build-a-bundle
Plus the enail I linked below. Is this all I need to use the flower pot on my piece? (18mm female)
https://www.vapes.com/products/mini-enail-kit-w-20mm-heating-coil-and-universal-nail
Thank you all for your time and advice!
Lmk what your choices were when you got yours. Also, if you recommend anything else over these options.
vapecat
Well-Known Member
Thanks for your reply and yes, that does make sense. I've spent so long researching all the options that I've forgotten some of the earlier research and decisions I'd made. I decided to keep the concentrates and flower seperate as the combo I thought would be a little used novelty for me. That's what made me go for a Weedeater and D-Cup, to have what I thought would be the best of both worlds. But now I'm starting to wonder if I don't have the best option for flower, and that that may in fact be offered by the Showerhead.. Have I messed up?
Ultimately I prefer a separate setup for flower and concentrate.
I haven't had a chance to use a WeedEater yet to compare, but I've used the SH and Vrod extensively.
vapecat
Well-Known Member
Well I suppose the Weedeater could be a good starting point for me. And if I feel like there is more potential, I could always get the parts to upgrade my setup to have the Showerhead too. Who doesn't like more toys, after all!
Interested to hear some opinions of anyone who has experience with the WE and SH. I know it's still early days for the WE, so not too many will be able to help, but would love to hear some comparisons.
Baron23
Well-Known Member
I'm with you, brother.
But you sure you can't use the FP carb cap with the WE?? I just don't know and can't really tell from the site descriptions.
I'm still totally in love with my FP SH. Just works so well. Now, I run my controller at 700 set point and cap. Yeah, I go for the bong hit type draws! hahaha
I'm considering selling my D-nail Halo and getting a D-cup. I have a Liger 2.0 20mm with Obsidian that I use often, but I do really like the simplicity of assembly/cleaning of the D-cup...and its a BIG dab surface, right? 30mm I believe.
I also really, really, really like how New Vape and @NewVape710 maintains a presence here and discusses his designs and features completely openly with the community and actually listens to feedback and does constant product improvement.
All very cool.
I used to live in FL...actually a few times...and maybe next 420 I'll get down to Miami and hit those $5 dabs with New Vape!! haha
vapecat
Well-Known Member
That's what I'm wondering too. Maybe the lollipop carb cap could work with it?
I've also ordered the D-Cup with obsidian, it's going to be better than Xmas when that package comes through!
bizwaxzion
Enigmatic Cannabist
The WE is certainly very capable without a cap, but there's also science behind the use of a carb cap, so I was hoping that @NewVape710 or @newvape918 might chime in on the fitment of their existing cap offerings on the WE head. From the images on the site, it seems that the showercap (3096) might work as well as basic cap (9223)?
WelshBrok
Well-Known Member
I have all the caps apart from the DCUP one and ordered the weedeater top nut on 4/20 so will be able to tell you in a few weeks. In my mind the titanium cap (can’t remember what it was called) would fit over it but I think all of them would need to be held in place
The Dcup looks very easy to maintain after seeing the video Edwyn posted the other day!
I agree a thousand percent! It's great having @NewVape710 around here and makes it really easy to feel confident about a New Vape purchase.IMO it would be preferable to just increase the draw restriction in the heat exchanger by incorporating smaller bore air inlets than use a carb cap. Same principal, easier vaping - and no hot carb caps.
I think one of the issues is that a carb cap for the Weedeater would potentially cost as much as a Showercap, but would only have half the function since you can't carb a dab on the weedeater. I'd appreciate a FP with a bit more draw resistance though as I like to use Flowerpots with larger water tubes.
Baron23
Well-Known Member
Yeah, I was thinking that the FP SH cap may well work...its stepped down across its width and it would be very cool if it fit the WE.
Hopefully @NewVape710 will respond and clarify for us.
Cheers