Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

YaMon

Vaping since 2010
@Summer my only concern with your approach (GB only, no adjustabowl with double weave screens) is you may not be able to grind finely enough to get the results the FP is capable of. I’ve gone the lazy route with a more course grind and was astonished by the performance difference.
 

Cannabis-Hardware-Ed

Seeking Higher Ground
Manufacturer
@Summer

Specifically, I want to know:

1) How well does the basic cap fit the SH? Well or just well enough?
1- the only carb cap that works with the showerhead is the showercap this is because the massive 1.375" OD.

2) Does the SH cap have air holes? And, & if so, which has the more open airflow of the two?
2- showercap does have one hole. Every carb cab has to have at least one hole.

3) what does 10-24 thread mean?
3- the 10-24 thread is the connection between our dabbers and our carb caps. Most of our carb caps have threads in the vertical and horizontal positions. For instance the threaded loading tool or any of the NV dabbers can be attached to any of the NV carb caps that shares the same thread.

@Baron23 has a great explanation of the science behind the carb cap.

There's alot of different techniques and methods to explore with the flowerpot. The temperature bandwidth available by the industrial enail controller and coil offer endless possibilities. Heat soak for conduction with or without the carb cap or use the flowerpot as a on demand convection the choice is yours. Some even add dabs on top of their flower for convection dabs. Look for some of the posts from @emmdeemo he's done a lot of work exploring the flowerpot possibilities.
 

Baron23

Well-Known Member
don't understand why if the coffee's boiling, it's not even warm??? Would think that it would get hot in proportion to the speed of heating.

Well, because you will NOT be able to heat a liquid past its boiling point at which point it turns into vapor.

So, on Mt Everest....about what, 25K feet above sea level. Coffee will boil at a much lower temp and you cannot get it any hotter no matter how much energy (heat) you input to it. It will hit boiling point at which time it turns to vapor...and will not get to be a liquid hotter than its boiling point.

Hope that helps.
 

YaMon

Vaping since 2010
@Baron23 essentially by lowering the pressure with the carb cap you are lowering the vaporization temperature of the herbs. What are the other upsides/downsides of doing so? I may have to come down from 747 and experiment with this! The testing is arduous, but I will sacrifice myself for the greater good. TGIF!
 

Baron23

Well-Known Member
What are the other upsides/downsides of doing so?

None that I know of but others like it uncapped....

As I said, personal preference. To me, I get thicker vapor, with a desirable level of draw resistance, at a slightly lower temp by capping.

Other folks, with lots of experience, just like to do it otherwise and feel that they get the experience and performance that they want with it uncapped.
 

YaMon

Vaping since 2010
None that I know of but others like it uncapped....

As I said, personal preference. To me, I get thicker vapor, with a desirable level of draw resistance, at a slightly lower temp by capping.

Other folks, with lots of experience, just like to do it otherwise and feel that they get the experience and performance that they want with it uncapped.
Well I have over a year of experience with the FP as my daily driver, but will experiment with this. Laziness and missing the point you raise are the only reasons I have not explored this as I am getting the results I desire. However, I do believe lower temperatures are healthier for us.
 

Azn2101

Well-Known Member
@Azn2101
if chick's asses are what you seek...

...science will not provide.
Unless you're into genetics! in which case...


Hahaha.

As a male in High school in the Early 2000's before there were "Dress Codes" because companies didn't have the audacity to made basically cavewoman cloths labeled as "Skin Jean Shorts" and skirts that you really didn't have to do anything but bend at about a 10° angle to see everything, (Sorry dad's. If it helps I'll be dealing with this in about a Decade and then in 2 years the other will reach the "age" that seems to get younger every year) there was a LOT of temptation.

Fast forward to now and at least these' s a stigma that goes along with wearing those SUPER revealing things but back then it was just the trend and thus most dudes (including me) walked away from gym class (very tight clothing) with....stiff pants.

Back on topic though it is a very interesting subject regarding atmospheric temperatures and the effects on our hobbies/medicinal needs.
 
Azn2101,
  • Like
Reactions: BigJr48

Summer

Long Island, NY
@mantis_871, I will read your post later today when I can concentrate fully & get back to you if I need further clarification. But as of now, thank you much for such an elaborate reply.

@Summer my only concern with your approach (GB only, no adjustabowl with double weave screens) is you may not be able to grind finely enough to get the results the FP is capable of. I’ve gone the lazy route with a more course grind and was astonished by the performance difference.

I have compromised lungs so only go for moderate vapor. I'd say my vaping style will prob. be similar to newvape 710's. My preferred grind is coarse. I can always pick up the ti bowl on BF.
 

Azn2101

Well-Known Member
@Azn2101
as a male in High school in the mid 80's stds weren't yet a real concern and my biggest challenge was figuring out how I was going to explain the seed burn hole in my new jeans to my mom.

Sometimes I dream about living in an era before computers and cellphones. As much as I enjoy, use, and in some cases rely on the technology of modern times I would like to believe based on my interests and lifestyle that I woul've been able to fit in and thrive under the circumstances but thats really not something I can fully comprehend because it would involve not knowing things and the ways of now.

Point being I think I really would've enjoyed growing up in those times.

I'd like to think. =)

But by no means was I getting any "actions" (which may make the above post a bit more creepy) in HS. I was busy pulling Friday-Sunday D&D gatherings and MTG and combusting whatever material could be bought, snuck, or grew ourselves.

Really looking forward to owning a product of your one day man =)

Edit: GOD I wish I could relate to the comments above but not owning a FP I really jusy have to go off of the single sesssion use I had with it. This is such a good topic that really should have a wider audience or maybe even its owm thread for this knowledge to spread.
 

WelshBrok

Well-Known Member
For my first year of flowerpot use I never really capped for flower (unless double deckers) and went with a slow draw all over the temp range, now I’ve converted more to capping at the same temp but drawing much faster. Seems to produce thicker vapour quicker and I find the draw resistance more reassuring like pulling through a bong back in the day
 

YaMon

Vaping since 2010
I have compromised lungs so only go for moderate vapor. I'd say my vaping style will prob. be similar to newvape 710's. My preferred grind is coarse. I can always pick up the ti bowl on BF.
I have allergy induced asthma, so at higher temps I am taking very short duration draws, but because of the fast extraction with the FP, I am realizing full spectrum effects I do not achieve with other vapes. My draw is so short that when a friend came over and hit my FP setup with his super long draw, he had a tiny bit of combustion (And followed that with a VRod bundle order on 420). So I can get away with 747 due to my short draw. I measure the draw by filling the 12.5” NV Stereo Matrix wih vapor, I then remove the FP, exhale and finish what’s left in the glass. Sometomes if my lungs are bad (Like now) it takes two draws to clear the glass piece. But that’s all good as I typically end up high AF.
 
Last edited:

bizwaxzion

Enigmatic Cannabist
Waiting on WE delievery in a few days and never really considered a carb cap for it. In light of the recent discussion, what would be the best option for capping the WE head should I choose to explore that?
 
bizwaxzion,
  • Like
Reactions: BigJr48

invertedisdead

PHASE3
Manufacturer
Waiting on WE delievery in a few days and never really considered a carb cap for it. In light of the recent discussion, what would be the best option for capping the WE head should I choose to explore that?

A showerhead. :D

I never used my SH capped though, IMO uncapped hits where you control your airflow is exactly like ripping a bong.

 

jardri

Vapor Dreams
I have the Showerhead since the first month of its release and have used it uncarbed a lot of time. Lately I just prefer to rip it carbed because i can get a lot of negative pressure and it delivers much faster vapor and denser vapor output. You have to inhale hard if you want to use carbed but it compensates in horsepower. Both methods get you equally high and in the end both extractions are complete but its really fun to have some variety and to be slightly changing the ritual.
 

Coustu

Well-Known Member
Well wouldn’t you know it? I got verification on Wednesday that my FP shipped, well in advance of the 3 weeks they suggested it might take. Then of course I tracked every move. Scheduled delivery tomorrow. But while at work today, I got notification that it’s out for delivery! Yeah, a day early! So I watched my tracking app all day just to find out that they attempted delivery but needed signature! DOH!!! So now i have to pick it up at post office tonorrow And tomorrow is one of 4 Saturday’s during the year that I have to work! uuuugh! Are the VAS gods displeased with me for some reason?
 

thevapist

Well-Known Member
I can assure you that none of your credit card numbers are stored on our magento server. The option that you're referencing is part of the authorize.net credit card processor module. No one at NewVape ever knows your complete credit card number. I do understand your concern.

Awesome, thanks! Just wanted to ask the source of truth.
 
thevapist,

Skunkport

Well-Known Member
My only gripe with the FP so far has been the state of my bong after every bowl, I've basically been giving it a major clean every day!

Tonight I remembered to try hot water and while it's not really enough difference in hit for me to bother usually, the difference in my bong was incredible. It's spotless! No condensed whitish blobs of emulsified cannabinoids/terpenes!

I don't know if I'm higher from the presumed extra, it's fairly hard to type this, I just actually stopped arguing with someone because I can't be arsed with it (very unusual for me) and I'm eating a snickers ice cream bar, but the FP does that to me anyway.

But clean bong is best bong. I'll keep the kettle ready from now on!
 

EmDeemo

ACCOUNT INACTIVE
My only gripe with the FP so far has been the state of my bong after every bowl, I've basically been giving it a major clean every day!

Tonight I remembered to try hot water and while it's not really enough difference in hit for me to bother usually, the difference in my bong was incredible. It's spotless! No condensed whitish blobs of emulsified cannabinoids/terpenes!

I don't know if I'm higher from the presumed extra, it's fairly hard to type this, I just actually stopped arguing with someone because I can't be arsed with it (very unusual for me) and I'm eating a snickers ice cream bar, but the FP does that to me anyway.

But clean bong is best bong. I'll keep the kettle ready from now on!

Warm water is great and recommended to anyone who hasnt tried it!

Circumstances has me back on flower for a few weeks.

I was on 630 for a few days until my usual lung issues cropped up, so its back to 600 and below for me. I wonder what it is in that 30 degrees that makes so much difference to my breathing? Its not like I'm any where near combustion etc, but its repeatable and is like clockwork that anything over 600 for a few days and my lungs start really reacting badly, if I stay at 600 and below, they're fine. And I dont feel like I'm missing out on any vapour at 600, my ABV is still as dark as I can get it :) Maybe its just that the higher temps releases vapour at a quicker rate and its easier for me to over do it slightly?

600 and below forever! :rofl:

The 500 club!

 
Last edited:

WakeAndVape

VapeLife X
Waiting is the worst part of any transaction!

6p9rbc.jpg


..I'll be in the club shortly... :spliff:
 
Top Bottom