The Lotus Vaporizer

David and Michael

Manufacturer
Manufacturer
pipe1.jpg


This is the new Lotus Vaporizer.

The Lotus is a portable vaporizer that uses a jet torch for its heat source.

Its design separates the flame and its fumes from the air you inhale. The air passes through a bowl beneath the heat exchanger( the blue ring), becoming vapor. The vapor is cooled by the aluminum stem as it passes through.

The heat exchanger slides onto the bowl and is held there with magnets.

Heat-up time is about 2 seconds and cool-down time is instantaneous.

The Lotus is made of maple, stainless steel, nickel and hard anodized aluminum. Thanks to the design and construction, there are no metal, plastic or wood flavors in the vapor.

The user adjusts the vaporizing temp by varying his/her inhalation speed and the flame location. A 'hot spot' on the heat exchanger gives visual feedback of the vaporization temperature, shortening the learning curve. This is described in the instruction guide and shown on a video on our web site.
http://www.lotusvaporizer.com/howto

People really love the Lotus; it's portable, easy to use and gives a lot of flavor.

I'm sure you are going to have questions. I'll try to answer them as best I can.



Mod note: as of November 23, 2023, Inhale took over the Lotus from the original designer and manufacturer, Max Jitter. At that time, we also changed the Max Jitter account name to @David and Michael (Inhale) with the unforeseen and unfortunate result that posts from Max now look like they were made by Inhale. This is entirely our fault (the moderators) for not recognizing the confusion that would result. While we can't correct the error, we hope that this note will at least help a little to sort out the problem. We offer our sincere apologies.
 
Last edited by a moderator:

lwien

Well-Known Member
Whatdya get when you marry a Vapman with a VaporGenie? Seems like a real viable alternative to either one of them.

Interesting vape, Jitter. Good luck with your new venture and welcome aboard.

btw, I also commend you on how you presented yourself and your product here. Well done.

Now let the questions begin. I'll start. Would you say that there is absolutely no wood, metal or butane taste when using this vape? And, is the Lotus manufactured here or offshore?

Love the idea of a magnetic top versus a screw-on top.
 
lwien,

pakalolo

Toolbag v1.1 (candidate)
Staff member
Definitely portable, stealthy not so much. That's a comment not a criticism.

If I'd seen this without knowing about the LB I probably would have bought one. It looks simple, robust, easy to clean and use. I like the looks too. The price looks competitive ($110 Lotus alone, $126 for a kit w/ lighter). I can see a lot of people buying one in the near future. I won't be one of them, though. Attractive as the Lotus looks, the LB already fills the portable niche for me quite nicely.

Congratulations Max!

PS Everyone should go watch the video.
 

NYC Vape

Well-Known Member
First I say welcome to the forum and congratulate you for bringing a new and well thought out vaporizer to market.

Can you contrast your product vs. the VaporGenie?

I find with the VG (I use a regular bic lighter) I have to inhale so much I'm hyperventilating to get any vapor.

I am in the market for a portable (other than the VG I use just on vacation).
 
NYC Vape,

David and Michael

Manufacturer
Manufacturer
Thanks for the welcome. I've been lurking for a while and the posts are usually quite thoughtful. It's a good site with a questionable name.

lwien said:
Now let the questions begin. I'll start. Would you say that there is absolutely no wood, metal or butane taste when using this vape? And, is the Lotus manufactured here or offshore?

There is no wood, metal or butane taste with the Lotus.
1 The air that goes past the wood is at room temperature.
2 I've had a lab test for nickel fumes (thin plate on top) and they are a small percentage of what is in normal air.
3 The inhalation air is drawn thru the little holes on the bottom of the heat exchanger, away from the flame. The flame fumes also go up because they are hot and low density.

The Lotus was designed here and will be built here. I'd like to see manufacturing return to the US, not leave.

NYC Vape asked:
Can you contrast your product vs. the VaporGenie?

The Vaporgenie and a lot of other torch powered vapes suck in the butane fumes along with the inhalation air. My objective in designing the Lotus was that there were to be no butane fumes inhaled. The original name of the Lotus was the Lotus Clean Air Vaporizer, but it was too long a name.

Lighters: The Lotus has to be used with a goose neck torch type lighter.
A Bic type lighter doesn't produce enough heat and when the flame hits the 'hot plate', it just dumps a bunch of soot on it.
The standard straight torch lighters don't work for very long when they are flipped upside down or past horizontal.
You could roll the Lotus on its side and use a straight torch lighter but then you only see the top with one eye and you lose depth perception.

pakalolo said:
Definitely portable, stealthy not so much. That's a comment not a criticism.

You're right. The Lotus comes in 2 stem lengths, 5 1/2" & 6 1/2", but it's definitely not as stealthy as the LB. I didn't want anyone to be worried about singing his/her nose with the torch.

 
Last edited by a moderator:

rotax

Zaporist
How long does the fuel last, in general?
How many hits, how many hours, days (depending on use of course), etc?

I like the idea behind the clean-air intake system.
 
rotax,

stickstones

Vapor concierge
Do any of its parts get too hot to touch, and if so, how long til they cool down?
 
stickstones,

David and Michael

Manufacturer
Manufacturer
rotax said:
How long does the fuel last, in general?
How many hits, how many hours, days (depending on use of course), etc?

I like the idea behind the clean-air intake system.

The lighter seems to go for about 5 bowls before it needs a refill. I'm asking more users and will have more info later in the week.

stickstones said:
Do any of its parts get too hot to touch, and if so, how long til they cool down?

The Lotus ring on the top definitely gets too hot to touch and takes 20-30 seconds to cool down.
 
David and Michael,

Jacopone

Well-Known Member
Hi Jitter,
Really interesting vaporizer, congratulations.
I am a regular user of the Vapman for my needs on the go and as such I am really interested if you could elaborate on what are the main advantages and or disadvantages of one versus the other.
They seem to be very similar in their approach so I am curious to know what you think.
Thanks,
Jacopone
 
Jacopone,

max

Out to lunch
Its design separates the flame and its fumes from the air you inhale.
While I think it's a good thing that the flame is not going into the bowl, as with the Vapor Genie or Vaporstar, you don't get butane fumes with those models either, at least not from the nozzle. You get partially burned carbon (soot) with a regular lighter, which is the preferred type for these models, vs. a torch.

A torch lighter injects air, with 20% oxygen being the important part, allowing a complete carbon burn as well, and emitting only carbon dioxide, water and heat. If any butane escapes intact from a torch lighter, it would be due to a poor seal (not issuing from the nozzle), and butane from that leak would be in the air no matter what type of vape you're using.
 

stinkmeaner

Well-Known Member
I noticed the center of the flower on the heat exchanger is quite dark, does this come off or is the metal discolored from the heat?

If it is discolored permanently, about how many vape sessions did it take to reach that level?
 
stinkmeaner,

DevoTheStrange

Ia! Ia! Vapor Fthagn!
Also, can the flower portion be exchanged for a new one if needed?
Although I would imagine there would be no need to do so, just wondering if it is an option.
 
DevoTheStrange,

IAmKrazy2

Darth Vapor
I like your style Jitter. Welcome, Nice first manufacturer post.

You need to add in a direct connect for 14mm and 18mm glass. Throw it in as a package. Has this been tried filtered through water directly into glass? If heat retention is correct, this could be very nice.

I may have just made you some money, i hope. :D

Edit: Oh, and i think you hit the nail on the head with the scoop. Great addition to the quick on the move portability of this product. But with glass, it might have more of a home market value too.

If this has already been mentioned, i apologize.
 

vumeister

Well-Known Member
It seems kind of expensive considering what it is...does anyone else agree with me on this? If you could get the price down a bit to like 70ish, then you've got a winner.
 
vumeister,

vapirtoo

Well-Known Member
I agree totally. I like the design as an alternative to my LB
when and if the electric power grid goes down.
The lotus is kind of big and bulky, but I like the pure
air flow. There will be another learning curve with this
one just like the others. Lets hope the price comes down,
Looks like it could be a contender!
 
vapirtoo,
  • Like
Reactions: ataxian

pakalolo

Toolbag v1.1 (candidate)
Staff member
vumeister said:
It seems kind of expensive considering what it is...does anyone else agree with me on this? If you could get the price down a bit to like 70ish, then you've got a winner.

I'm not sure why you think it should cost less. Is it too simple? Not big enough? Not small enough? Cheap materials? I don't really know what it costs to make one, do you? What do you think would be a reasonable markup?
 
pakalolo,
  • Like
Reactions: ataxian

vumeister

Well-Known Member
It just seems like I can shimmy something like this for 20 bucks with similar materials. Perhaps it's the simplicity.
 
vumeister,

lwien

Well-Known Member
vumeister said:
It seems kind of expensive considering what it is...does anyone else agree with me on this? If you could get the price down a bit to like 70ish, then you've got a winner.

Aluminum VaporGenie costs 60 bucks.
Vapman costs 150.

This is kind of a hybrid between both of those so their price of 110 seems to be about in the ballpark if you go on that logic.

If ya go on the logic of what is available for portables in the market:
55 to 60 for a VaporGenie
150 for a Vapman
200 for an Iolite
200 for a Supreme with a digital display
and 100 bucks for a LaunchBox

then imho, 110 seems to be in the right ballpark.

Considering the cost of materials and manufacture, why would you feel that the LaunchBox should cost 30 dollars more on your thought that the Lotus should be priced at only 70, unless of course, you feel that the LaunchBox is also overpriced.

Like pakalolo said, I have no idea how much it costs to manufacture one of these, nor do I know the amount of time and effort it took to bring it to market but strictly from what the "market will bear" perspective, I think somewhere between 90 to 110 seems about right.
 
lwien,

lwien

Well-Known Member
vumeister said:
It just seems like I can shimmy something like this for 20 bucks with similar materials. Perhaps it's the simplicity.

It's funny. People said the exact same thing about the LaunchBox.

I have no idea how well the Lotus works, but if it works well, and if you can build one that works just as well and looks just as nice and is just as safe to use for 20 bucks, I'll buy it for 40 bucks from ya. You'll double your money. :brow:

All kidding aside though, I think it's pretty easy to make something complicated work. The real trick is making something simple work and it's that philosophy that is one of the big reasons for the overwhelming success of the LaunchBox as well as one of the downsides to the Iolite.

But hell, we really don't know how good the Lotus really is until we get one in the hands of one of our members here who can write up a report. It may not even be worth 20 bucks for all we know. But on paper, it looks pretty neat.
 

David and Michael

Manufacturer
Manufacturer
Jacopone said:
I am a regular user of the Vapman for my needs on the go and as such I am really interested if you could elaborate on what are the main advantages and or disadvantages of one versus the other.

Neither sucks in butane/flame fumes, using different methods.
The Vapman is smaller
The Lotus uses convection to heat the herb. It seems that the Vapman has the herb on the same plate that is being heated. That would give you conduction heating, which isn't as even in heating the herb as convection.
The Lotus can be cleaned by putting the bowl/stem in alcohol.
The aluminum stem of the Lotus cools the vapor.
The Lotus is used more like a traditional pipe.
The Vapman uses a copper heating plate vs a nickel plate on the Lotus. Copper oxidizes at a lower temp than nickel. Have you seen any signs of oxidation?
We'll have to wait until someone has tested them head to head to get a real comparison.

max wrote:
You get partially burned carbon (soot) with a regular lighter, which is the preferred type for these models, vs. a torch.

I vote for no soot or flame fumes. There is probably a difference in the taste.


stinkmeaner wrote:
I noticed the center of the flower on the heat exchanger is quite dark, does this come off or is the metal discolored from the heat?

The metal gets discolored the first time it is heated and stays that way. Every spot that was red becomes dark blue.
I will be offering replacement plates, but it wouldn't be worth it unless the old plate was punctured or badly dented.

A model that fits a standard bong stem will be offered in the future but right now I'm flapping my wings as hard as I can to get this model off the ground.

vumeister wrote:
It just seems like I can shimmy something like this for 20 bucks with similar materials. Perhaps it's the simplicity.

Its easy to make something complex. Its harder to make it simple. This is the 12th model I've made and I have a patent pending on it.

[URL='http://fuckcombustion.com/threads/best-of-the-lotus-vaporizer-thread.16733/'] [/URL]
 
Last edited by a moderator:

DeepFried

A Legend in my Own Mind
Nice to see some new vape designs, congratulations on a nice clean design. On your site it says "The Lotus Vaporizer features a one-piece aluminum stem and screened bowl." Does that mean the screen is aluminum too, I doubt it but just checking.
 
DeepFried,

ShadowLink12

Activist
I can't wait to see some user videos of this, as it looks like an impressive piece. I am not saying it should be cheaper, as I am sure it deserves its price point, but it isn't a purchase for me for a while at that price.
 
ShadowLink12,

vumeister

Well-Known Member
lwien said:
vumeister said:
It seems kind of expensive considering what it is...does anyone else agree with me on this? If you could get the price down a bit to like 70ish, then you've got a winner.

Aluminum VaporGenie costs 60 bucks.
Vapman costs 150.

This is kind of a hybrid between both of those so their price of 110 seems to be about in the ballpark if you go on that logic.

If ya go on the logic of what is available for portables in the market:
55 to 60 for a VaporGenie
150 for a Vapman
200 for an Iolite
200 for a Supreme with a digital display
and 100 bucks for a LaunchBox

then imho, 110 seems to be in the right ballpark.

Considering the cost of materials and manufacture, why would you feel that the LaunchBox should cost 30 dollars more on your thought that the Lotus should be priced at only 70, unless of course, you feel that the LaunchBox is also overpriced.

Like pakalolo said, I have no idea how much it costs to manufacture one of these, nor do I know the amount of time and effort it took to bring it to market but strictly from what the "market will bear" perspective, I think somewhere between 90 to 110 seems about right.

The lotus is basically a fancy lightbulb vape in my opinion...and I find that the Magic Box is more complex because it has a built in heating element which is far harder to build and therefore making it cost more. The lotus has essentially 3 basic parts: a tube, a bowl, and a hot plate....that's it. The lotus is more comparable to the VG as it is the same thing, basically you can just replace the ceramic filter with a hot plate and you've got a lotus. The price should be more closer to the VaporGenie if this product wants to be competitive in this market. The cheapest VG goes is $45, a price of $70 like I initially stated still seems like a reasonable price point for it being a new product/company. I just feel like that the lotus would be more successful with a lower price point then what it is right now.
 
vumeister,
  • Like
Reactions: ataxian

stinkmeaner

Well-Known Member
Compare this to the complexity of the SoloPipe which can be bought for as low as $30, the Solopipe is way more complicated so this could be priced cheaper but most vapes should.

I don't know why everyone is targeting the Lotus Vape as over priced when the Vaprorizer market is flooded with products that are simply overpriced, most desktop models like the SSV, DBV, & VB too name a few are still just a heating element and a dimmer placed inside different enclosures like aluminum tube or a wood box.

I think as consumers in the Vaporizer market, we have to get used to inflated prices because in this type of niche market, new products are going to come out all of the time and many of them are failures or duds so I think the Manufacturers price products high initially so they can recoup some of their money and then most will lower the price after it has been out long enough, and by the time they make it to distributors or Ebay, most can be bought for nearly half of the MSRP that they started as.
 
Top Bottom