cybrguy
Putin is a War Criminal
I'm looking forward to the cosmetic changes as they look cool, but the serpentine tip grooves are the most interesting part to me and what will lead to performance differences. Can't wait to try it myself.
Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
bossman
Gentleman Of Leisure
I like the new M and I couldn't be more pleased with the KarmaVap. I gave my 2018 M to a friend who was newly converted to vaping so the idea resonates for sure.
I'm surprised to hear so many folks on this thread celebrate the flavor of the VapCap experience. I have an Omni XL and a standard Omni plus this new M and the terps are toast after one hit. Are folks intentionally going for small hits with a single torch to get an extra flavor hit maybe? That's all I can think of unless everyone on this thread has never tried any on demand convection devices.
I'm surprised to hear so many folks on this thread celebrate the flavor of the VapCap experience. I have an Omni XL and a standard Omni plus this new M and the terps are toast after one hit. Are folks intentionally going for small hits with a single torch to get an extra flavor hit maybe? That's all I can think of unless everyone on this thread has never tried any on demand convection devices.
Dynalowrider
Well-Known Member
I got one of those glass stems with indentation on the inside. Well, the taste and cooling is there, but I would never heat one with a torch outside of my house. It looks too much like a crack-pipe. I'm sorry but I'm only going to use it in the privacy of my own home. I like the taste and cooling, but not the looks of it.
That's not the only glass I'm not taking out of the house. I got high and thought, I bet that "Cane Gun" would really work. Look this thing up. It may not be obscene, but it's qualified to stand-by for one that is. Damn thing is 4 sale. Doc
That's not the only glass I'm not taking out of the house. I got high and thought, I bet that "Cane Gun" would really work. Look this thing up. It may not be obscene, but it's qualified to stand-by for one that is. Damn thing is 4 sale. Doc
TheBandit
Well-Known Member
"Terps are toast" seems like a good way to put it. Sometimes I'm able to pull some out of the second hit, but that's usually with undercured flowers that have a bit more moisture than they should. But I'm almost always using a quad torch, so I run it pretty hot and only get a couple hits out of it anyway. I only have titanium tips at the moment, but I'm looking forward to try the stainless M19, which just shipped out this morning along with some sparts and a titanium spinning mouthpiece for my Nonavongs.
My only Dynavaps are Nonavongs, and I hit them through glass almost all the time. It'll be interesting to try a stainless non-Vong version. I got a couple of those rubber waterpipe adapter mouthpiece things to try it through glass.
My only Dynavaps are Nonavongs, and I hit them through glass almost all the time. It'll be interesting to try a stainless non-Vong version. I got a couple of those rubber waterpipe adapter mouthpiece things to try it through glass.
cybrguy
Putin is a War Criminal
Unless I am all about getting flavor, meaning flavor is primary goal, I hardly ever get any flavor after the first hit. If I DO want it I have to be very gentle heating.
If it is slam bam than I get no flavor hits. But I DO get the buzz, and after all...
And, btw, if I am using a nonavong and I do want a flavor hit, I do it naked (no glass) for the first hit. I can get a flavor hit from my Splinter through water, but not really with the VapCap.
If it is slam bam than I get no flavor hits. But I DO get the buzz, and after all...
And, btw, if I am using a nonavong and I do want a flavor hit, I do it naked (no glass) for the first hit. I can get a flavor hit from my Splinter through water, but not really with the VapCap.
Monk Debate
The monks do be debatin’
Unground bud and induction heater can yield a ton of flavor through multiple hits. With the Dynacoil I only put on enough for one hit at a time anyway, so it’s always fresh flavor there.
On a side note I’ve really been enjoying lower THC sativas and sativa dominant blends lately. Takes a little edge off without impairing my ability to function, and I end up feeling just lovely. Been microdosing Mickey Kush in my M and it’s such a wonderful strain. Then I’ll jump over to one hit of J1 live resin on the Dynacoil and I’m smooth as silk.
On a side note I’ve really been enjoying lower THC sativas and sativa dominant blends lately. Takes a little edge off without impairing my ability to function, and I end up feeling just lovely. Been microdosing Mickey Kush in my M and it’s such a wonderful strain. Then I’ll jump over to one hit of J1 live resin on the Dynacoil and I’m smooth as silk.
cybrguy
Putin is a War Criminal
Since I have a Dynacoil coming I'm gonna have to find a source for resin or wax or shatter, I just haven't found them yet. I may have to wait for my state to go legal, but I expect that before the end of 2020 anyway...
I will be terribly disappointed if Pritzker can't get this done...
I will be terribly disappointed if Pritzker can't get this done...
hopla
Well-Known Member
If i were in your shoes i couldn't wait that long!
Never thought about having a try at some DIY rosin?
Some cheap improvised rosin press just to try the Dynacoil
or even more easy
Last edited:
cybrguy
Putin is a War Criminal
Actually several users here have encouraged me to try pressing my own resin and it is tempting I must say, but at this point I am just not looking for another 
to complicate my buzz life. A device to take advantage of concentrates should I find them, absolutely, and with the Dynacoil and a new Lotus cap I think I have that covered, but I don't think I will be creating them myself any time soon. We never know, however, what the future holds.
to complicate my buzz life. A device to take advantage of concentrates should I find them, absolutely, and with the Dynacoil and a new Lotus cap I think I have that covered, but I don't think I will be creating them myself any time soon. We never know, however, what the future holds.
cybrguy
Putin is a War Criminal
I haven't checked in with @Pipes lately, but he used to have a few of the plugins in stock. If not he usually isn't too far from being able to ship something. I have his JarHead and it is still working great. I think the Caldron has replaced the Jarhead.
https://docs.google.com/document/d/1_202eBzWeF7rkTjqV5sWumPxtbSNtfjqOZEs1i9d16k/edit
I just looked and Caldrons will be available in May, PSMs a few weeks and the BareBones parts are available immediately, or so the site says.
https://docs.google.com/document/d/1_202eBzWeF7rkTjqV5sWumPxtbSNtfjqOZEs1i9d16k/edit
I just looked and Caldrons will be available in May, PSMs a few weeks and the BareBones parts are available immediately, or so the site says.
TheBandit
Well-Known Member
Yes, it appears to be "waiting lists" all the way down.
I'd be surprised if Dynavap didn't come up with an induction solution before too long. But it does seem like something they'd have to put a fair amount of R&D in. I'm sure they'd sell boatloads of them. Introducing electronics into the manufacturing equation introduces some risk and bother though. So who knows...
I'd be surprised if Dynavap didn't come up with an induction solution before too long. But it does seem like something they'd have to put a fair amount of R&D in. I'm sure they'd sell boatloads of them. Introducing electronics into the manufacturing equation introduces some risk and bother though. So who knows...
muunch
hotboxing the cockpit
You are exactly right. They are working on it (as stated in the Spannabis dynavap live) but to mass produce an IH that is both useful and SAFE isn't such an easy task. I don't think it will be out "soon" but it is coming.
I assume with all the testing they are (supposedly) doing it will be worth the wait.
abigdaddya
Well-Known Member
Good karma here too. I know just the person that needs this..
I believe it's there to hold the vap in place, so no bouncing around in there.
Last edited by a moderator:
Monk Debate
The monks do be debatin’
That’s the one I’ve got.
hopla
Well-Known Member
If i recall correctly George in Barcelona said at the Spannabis that the IH was almost ready (5-7 weeks), so from 15 March it should be ready for....4/20.
When you say you don't want to DIY i hope you don't believe you couldn't do it, as it's really very simple to assemble, and for around 30$ it's unbeatable (and you'll easily find a better enclosure than mine, i did really without any research with the first thing i found in the house).
Here is the live chat where he talked about it, beta tests in mid april and hopefully in sale for early summer... so no 4/20
Last edited:
Gigsabits53
Well-Known Member
Just finished my 1st go at my new M19. Major airflow compared to my M18. Also love the new airport. Feels great in the hand.
dale_ranchero
Stuff Doer
Modnote: Edited to display image
Last edited by a moderator:
Ramahs
Fucking Combustion (mostly) Since February 2017
LoL...I bought the parts from Pipes, became impatient, and just put them in a cardboard grinder box. One friend who's used it has already had me order the parts from @Pipes to build their own. And I plan on ordering more parts from Pipes to make another for myself soon, in a better enclosure. lol.
KidFated.
Unknown Member
Man, you might think it’s cheap or whatever, but thats a sweet IH, no question about it.LoL...I bought the parts from Pipes, became impatient, and just put them in a cardboard grinder box. One friend who's used it has already had me order the parts from @Pipes to build their own. And I plan on ordering more parts from Pipes to make another for myself soon, in a better enclosure. lol.