StormyPinkness
Rhymenocerous ʕ•ᴥ•ʔ
Hadn't seen this before, but for anyone wondering the bangers work great on littles.
710 coils
- Thread starter 710Coils
- Start date
-
- Tags
- coils concentrates enail
pxl_jockey
Just a dude
Huh?! What are littles? I’m ignorant in a savage land, please edumacate me. I’m willing to learn!Hadn't seen this before, but for anyone wondering the bangers work great on littles.
Huh?! What are littles? I’m ignorant in a savage land, please edumacate me. I’m willing to learn!
I'm curious too, I've always heard of littles/smalls as popcorn nugs.
StormyPinkness
Rhymenocerous ʕ•ᴥ•ʔ
Oh I have no idea what littles are, I figured it'd get a laugh here or someone would tell me where using that word came from. I didn't make that clear enough in my post. Some very affordable bho shatter was in the package, though I do kind of like using the term littles...
Dabbing some littles, doing a littles dabbing.
Dabbing some littles, doing a littles dabbing.
b0
Cloudy...
So the auber supports bi volt then? Seems like in their website I can only choose 110v coil, that's what confuses me. Do I need to send them an email if I want my unit to run 220v coils?
Edit: Got an email for them, their unit run in both 110 and 220 I just need the right coil, 220 in my case
Last edited:
Grifo
Well-Known Member
Just got my sapphire insert from constant gems, i do not have a 25mm banger so i tried it on my 30mm banger with small pearls around it and man the taste is out of this world. I have a 25mm from 710 coils on the way but i might have to go to the smoke shop and pick one up because impatient.
The Auber will work in both 110 volt and 220 volt without any adjusting. It does the switch automatically and nothing is needed to be adjusted.So the auber supports bi volt then? Seems like in their website I can only choose 110v coil, that's what confuses me. Do I need to send them an email if I want my unit to run 220v coils?
Edit: Got an email for them, their unit run in both 110 and 220 I just need the right coil, 220 in my case
@Grifo The FC code was limited to one use per person. But here is another code that will get you 10.00 off your order
HookItup
The above will save you 10.00 on an order over 40.00
Opaque inserts are due to ship this week and all pending orders will get shipped out and goodies will be added for being soo damn patient =)
Hope everyone is having a great day !!!!!!!
Your ever loyal coil and quartz monger
Shane
Mine aren’t ... they are good, but not air tight ...
@biohacker I also checked and most dont make an airtight seal. But a strong enough seal that the banger will hold the cap when I draw through the banger with the cap in place
Grifo
Well-Known Member
yeah too late lol i pmd you about it. Ill use it next time.
tharealmclovin
Well-Known Member
Grifo
Well-Known Member
I dont have a coil or ir laser yet
StormyPinkness
Rhymenocerous ʕ•ᴥ•ʔ
@biohacker Whats your preferred torch/cooling times you use for your sapphire and ruby inserts? @Grifo is looking for some advice and you were the first person that came to mind =)
@StormyPinkness I will toss out the idea to Quartz Pi and see if he would ever be interested in adding my logo somewhere on his caps =)
All bangers will be restocked next week and I will also be adding 14mm female 90 degree bangers to the mix!!!!
Opaque inserts in non slit will be back in stock and the slit are coming in shortly. I have also been pushing to get the bottom pucks back to 6mm and they finally took care of it. So the current opaque bangers I have in stock and everything coming in Tuesday will be with a 6mm puck!!!! This means more heat retention for those dabs and should also equate to lower temps and longer heat retention =)
Hope everyone is having a great weekend so far
Your ever loyal coil and quartz monger
Shane
@StormyPinkness I will toss out the idea to Quartz Pi and see if he would ever be interested in adding my logo somewhere on his caps =)
All bangers will be restocked next week and I will also be adding 14mm female 90 degree bangers to the mix!!!!
Opaque inserts in non slit will be back in stock and the slit are coming in shortly. I have also been pushing to get the bottom pucks back to 6mm and they finally took care of it. So the current opaque bangers I have in stock and everything coming in Tuesday will be with a 6mm puck!!!! This means more heat retention for those dabs and should also equate to lower temps and longer heat retention =)
Hope everyone is having a great weekend so far
Your ever loyal coil and quartz monger
Shane
Variables like what torch, fuel level, and technique all affect times, but with a full Big Shot it's about 45s on, and 1:30-2:30 cool down to get to around low 500's IME. I stopped timing once I picked up the IR Thermometer, which is an absolute must have for any torchers IMO.
Grifo
Well-Known Member
Thanks! Gotta wait till payday for an IR thermometer but that kinda helps thanks
FlyingLow
Team NO SLEEP!
Thanks Shane, been enjoying my new setup and going back and forth between the new quartz and my old SiC. The increased airflow and taste is incomparable and incredible! But I find myself lacking the lung capacity to put any continued spin on the pearls. Even without spinning the pearls much, I do appreciate the extra surface area the pearls provide.
The greatest improvement over my SiC setup is that the quartz handles larger dabs so much better.
Makes me curious of the inserts. Can you break down the differences/similarities between using pearls versus an insert cup versus without?
The greatest improvement over my SiC setup is that the quartz handles larger dabs so much better.
Makes me curious of the inserts. Can you break down the differences/similarities between using pearls versus an insert cup versus without?
I prefer a bubble cap with long spout for driving pearls over the spinner caps. Doesn't go as fast but still effective.