The Nomad From Morwood
- Thread starter Dan Morrison
- Start date
Copacetic
Somewhere North of The Wall
That is friggin' lovely.
Nomad No.45. Been an absolute pleasure being part of this batch.
I love every part of it Cl4ud3, them's some SOLID choices!
The plain sleeve with the logo really works brilliantly.
What wood is the collar?
to both you and Dan 
Cl4ud3
Well-Known Member
Thanks, I'm so happy with the end result. Paper was a difficult choice but early on I decided something plain with the Okin stamp would work and I have to say it's perfect for me. The collar is Cherry, I wanted something that would sort of tie it to the paper and my light wood choice.
Copacetic
Somewhere North of The Wall
Well it's a peach.
I've yet to see a pic of a Nomad that has left me underwhelmed, as so far they ALL look great, but yours is top notch indeed.
@Dan Morrison, I know you've said you are going to include the wood 'loading capsule' with Nomads going forward (thanks!), but have you considered offering them as an optional extra for folk who might want to buy extras?
And if so how much would they be?
lieutenantlemons
Well-Known Member
Dan already contacted batch 3 so you're most likely in batch 4 or later.
That button
Nomad No.45. Been an absolute pleasure being part of this batch.
Last edited by a moderator:
Vision103
Vision103
Go on Instagram and message him. That's how I got on the list.
seriousTone
Well-Known Member
I love the light burl with that raw kraft paper. And the collar color as well.
Nomad No.45. Been an absolute pleasure being part of this batch.
This is one of my favorites that hasn't been a dark wood and honestly has become my favorite sleeve choice as well since a sleeve is required.
Bdubbdiblets
Well-Known Member
Montezhuma
Active Member
So I’ve been putting off this review for awhile. I’ve been playing with my nomad off and on, doing my best to use it how I would truly want to use it. That is where I’ll start I guess.
I’ve been a vape enthusiast for the better part of two years now, like a lot of people I started small. Bought a Dynavap M, tinkered with it until I could afford something cooler. In-come Grasshopper, then an IQ (a near flop; don’t buy used, kids). Bought and traded a lot on ent-exchange, mostly on demand vapes. Fell in love with my E-nano, through water was my favorite. Any new devices I bought were mostly battery vapes, conduction. I liked the instant vapor from those vapes, but it seemed pale compared to what I used to get from convection.
I forget when I saw the first mock-up of the Nomad, but remember my VAS perked up like a daisy in soaked in viagra. I was a little disappointed that it wasn’t functional yet, but I watched the thread grow until the first prototype. Watching the *literal* pieces of a puzzle being put together on this thread was the most exciting thing I’ve experienced on the internet. I asked a few questions about dans plan before putting my name on the list, concerns about payment, and iteration time. Wasn’t lucky enough to be a batch one, but everybody knows you don’t buy the first model. Lucky number 26 was my spot, first of the second batch. I felt so lucky.
I was no stranger to waiting at this point, like so many other users on here. There was long wait for the first batch to be completed, Dan took some time off, but finally it was time. I took my time deciding all my options, weighing cost and taste. I locked in my choices with Dan, along with a ticket for a custom addition. More waiting, and watching, I’ve paid by this point. I grew a little impatient I’ll admit by the time the new year rang in. I exchanged some e-mails with Dan, questions about the progress on the vape, as well as an updated release date. The day draws closer, I exchange a few more e-mails, and I’m rewarded. I finally saw it. Beautiful shots of what was going to be my vape. A custom designed, optioned out vape. That someone crafted just for me. It even had a one off “Button Monacle”( serious kudos to Dan, it only took him a few days to mock-up and build that thing, all while the laquer dried.)
I finally get the opportunity to load my first stem and...
Wispy vapor. I’m not floored at this point as I’ve thoroughly tested many types of vapes, many of which could give me potent white vapor. I try never to judge a vape by its cloud, but my first thoughts weren’t 10/10. Maybe some people will be disappointed by this but there’s more.
I continue to test the device. By this point I still haven’t realized that I’ve mixed up the heat modules. I’ll admit I didn’t really go through any of the guides. Still haven’t. I played with transformers as a kid and if I learned one thing; it was that if you read the directions you’ve wasted your money.
The draw resistance for me was what was holding the device back, but I’m not one to bitch and moan, and get someone to fix it for me. I like to tinker. So I carved a little air restrictor out of a cork from the hardware store (also where I picked up some di-electric grease, as I planned to disassemble it soon. (P.s they keep that stuff by the lawnmower accessories, it’s for spark plugs.))
Once I had that problem was solved I tried it through water, as I saw in a user video that the stem can press firmly into a 14mm male joint. Consistent vapor. Not too thick but being pure convection, it was more than potent, and easy on the throat. With the right draw restriction the air and vapor ratio was just right, for me at least.
By this time I’ve looked up which heater modules were which, both work equally in their own capacities. The medium-low heater can produce anywhere from an almost invisible vapor, to a thicker but wispy breath, depending on your technique, which I will touch more in a moment. The medium-high module has a much steeper curve of vapor density, which browns your material very rapidly if you let it heat for too long and/or with a slower breath. Technique is key, but at 119 pages and counting, I’m sure most already would have guessed that
No rating just yet but I do want to talk about technique. I couldn’t begin to describe how to operate this device, or any “manual on-demand vape” I’ve used without watching someone in front of me so I won’t. Trial and error and trial again is the only way you can truly enjoy one of these. I recommend however that you pay close attention to the heat as it hits the back of your throat, as it’s good sign you’re going to get vapor.
A more practical tip for you, with the stems designed to stay in place how they are, you can roast your stem on one side, take it out and push it through to the other end, flip and roast again. Repeat until no more vapor appears. This results in even, fully roasted ABV. It works especially well with the capsule that came included with one stem. This technique will work without the capsule, but may require stirring, and it does compress the material.
Time for a rating. This is a tough one. I don’t think it belongs in any other category besides on demand convection, but it is starkly different from what else is in the market. Comparing it to the other unregulated vapes in the same category; the most noticeable difference would of course be the design and the circuitry. Barring that, there isn’t much that would turn me onto it besides looks. This may sound harsh but hear me out.
It’s not any easier to use than a milaana or lil bud, two of the more accessible vapes that I’m aware of. There is a wait time for those as well, the latter I’m quite familiar with. With practice you can make any of these vapes work for you, if it’s the style of vaping you like.
For the price tag you get what the packing slip says it is,”Original wood art.” This isn’t an upgrade from your other convection vapes. This isn’t a daily driver. This isn’t a vape you hit hard and put away wet. It’s much more than that.
This vape is for the enthusiast, for someone who has experienced what vaping has to offer, and chooses their vape not based on how high they will get, or how easily they will get there. They know that there are a dozen options made of plastic with temperature control, for a third of the price. This vape is for those who know the value of simplicity. It’s a vape that has two modes:
On or off
If that’s not enough then this vape is not for you
If that’s all you need, then this vape will be your best friend.
Lucky #26
I’ve been a vape enthusiast for the better part of two years now, like a lot of people I started small. Bought a Dynavap M, tinkered with it until I could afford something cooler. In-come Grasshopper, then an IQ (a near flop; don’t buy used, kids). Bought and traded a lot on ent-exchange, mostly on demand vapes. Fell in love with my E-nano, through water was my favorite. Any new devices I bought were mostly battery vapes, conduction. I liked the instant vapor from those vapes, but it seemed pale compared to what I used to get from convection.
I forget when I saw the first mock-up of the Nomad, but remember my VAS perked up like a daisy in soaked in viagra. I was a little disappointed that it wasn’t functional yet, but I watched the thread grow until the first prototype. Watching the *literal* pieces of a puzzle being put together on this thread was the most exciting thing I’ve experienced on the internet. I asked a few questions about dans plan before putting my name on the list, concerns about payment, and iteration time. Wasn’t lucky enough to be a batch one, but everybody knows you don’t buy the first model. Lucky number 26 was my spot, first of the second batch. I felt so lucky.
I was no stranger to waiting at this point, like so many other users on here. There was long wait for the first batch to be completed, Dan took some time off, but finally it was time. I took my time deciding all my options, weighing cost and taste. I locked in my choices with Dan, along with a ticket for a custom addition. More waiting, and watching, I’ve paid by this point. I grew a little impatient I’ll admit by the time the new year rang in. I exchanged some e-mails with Dan, questions about the progress on the vape, as well as an updated release date. The day draws closer, I exchange a few more e-mails, and I’m rewarded. I finally saw it. Beautiful shots of what was going to be my vape. A custom designed, optioned out vape. That someone crafted just for me. It even had a one off “Button Monacle”( serious kudos to Dan, it only took him a few days to mock-up and build that thing, all while the laquer dried.)
I finally get the opportunity to load my first stem and...
Wispy vapor. I’m not floored at this point as I’ve thoroughly tested many types of vapes, many of which could give me potent white vapor. I try never to judge a vape by its cloud, but my first thoughts weren’t 10/10. Maybe some people will be disappointed by this but there’s more.
I continue to test the device. By this point I still haven’t realized that I’ve mixed up the heat modules. I’ll admit I didn’t really go through any of the guides. Still haven’t. I played with transformers as a kid and if I learned one thing; it was that if you read the directions you’ve wasted your money.
The draw resistance for me was what was holding the device back, but I’m not one to bitch and moan, and get someone to fix it for me. I like to tinker. So I carved a little air restrictor out of a cork from the hardware store (also where I picked up some di-electric grease, as I planned to disassemble it soon. (P.s they keep that stuff by the lawnmower accessories, it’s for spark plugs.))
Once I had that problem was solved I tried it through water, as I saw in a user video that the stem can press firmly into a 14mm male joint. Consistent vapor. Not too thick but being pure convection, it was more than potent, and easy on the throat. With the right draw restriction the air and vapor ratio was just right, for me at least.
By this time I’ve looked up which heater modules were which, both work equally in their own capacities. The medium-low heater can produce anywhere from an almost invisible vapor, to a thicker but wispy breath, depending on your technique, which I will touch more in a moment. The medium-high module has a much steeper curve of vapor density, which browns your material very rapidly if you let it heat for too long and/or with a slower breath. Technique is key, but at 119 pages and counting, I’m sure most already would have guessed that
No rating just yet but I do want to talk about technique. I couldn’t begin to describe how to operate this device, or any “manual on-demand vape” I’ve used without watching someone in front of me so I won’t. Trial and error and trial again is the only way you can truly enjoy one of these. I recommend however that you pay close attention to the heat as it hits the back of your throat, as it’s good sign you’re going to get vapor.
A more practical tip for you, with the stems designed to stay in place how they are, you can roast your stem on one side, take it out and push it through to the other end, flip and roast again. Repeat until no more vapor appears. This results in even, fully roasted ABV. It works especially well with the capsule that came included with one stem. This technique will work without the capsule, but may require stirring, and it does compress the material.
Time for a rating. This is a tough one. I don’t think it belongs in any other category besides on demand convection, but it is starkly different from what else is in the market. Comparing it to the other unregulated vapes in the same category; the most noticeable difference would of course be the design and the circuitry. Barring that, there isn’t much that would turn me onto it besides looks. This may sound harsh but hear me out.
It’s not any easier to use than a milaana or lil bud, two of the more accessible vapes that I’m aware of. There is a wait time for those as well, the latter I’m quite familiar with. With practice you can make any of these vapes work for you, if it’s the style of vaping you like.
For the price tag you get what the packing slip says it is,”Original wood art.” This isn’t an upgrade from your other convection vapes. This isn’t a daily driver. This isn’t a vape you hit hard and put away wet. It’s much more than that.
This vape is for the enthusiast, for someone who has experienced what vaping has to offer, and chooses their vape not based on how high they will get, or how easily they will get there. They know that there are a dozen options made of plastic with temperature control, for a third of the price. This vape is for those who know the value of simplicity. It’s a vape that has two modes:
On or off
If that’s not enough then this vape is not for you
If that’s all you need, then this vape will be your best friend.
Lucky #26
Thanks for your thoughtful review. 
I had never thought to do that! Genius dude.
And I have tested di-electric grease, the best stuff I could find, And don't ask me why...but it doesn't work nearly as well as plain ol' Vaseline for the internals of the button. Vaseline won't harm the wood or have that grease smell either. If you want to test the grease I welcome your findings as a fellow tinker-er!, just check to see if it's plastic compatable with acetal and teflon, most of them should be. Also be sure it doesn't contain silver, as this type of conductive grease could short the button if it was applied very liberally.
I had never thought to do that! Genius dude.
And I have tested di-electric grease, the best stuff I could find, And don't ask me why...but it doesn't work nearly as well as plain ol' Vaseline for the internals of the button. Vaseline won't harm the wood or have that grease smell either. If you want to test the grease I welcome your findings as a fellow tinker-er!, just check to see if it's plastic compatable with acetal and teflon, most of them should be. Also be sure it doesn't contain silver, as this type of conductive grease could short the button if it was applied very liberally.
Last edited:
Ramahs
Fucking Combustion (mostly) Since February 2017
Thanks for that @Montezhuma !
little maggie
Well-Known Member
I love hearing from those who've been trying theirs out.
I thought there was a thread somewhere that talked about shipping. I'm hoping to get mine for my birthday at the end of March. I'm not really in a hurry- just thought it would be a nice present. Past March, I'm ok with whenever
I thought there was a thread somewhere that talked about shipping. I'm hoping to get mine for my birthday at the end of March. I'm not really in a hurry- just thought it would be a nice present. Past March, I'm ok with whenever
@little maggie , Yours is going out next week, 10 others should have got their tracking info already via email on Friday. I will be sure to let you know when it's shipped. Your little fishy vape is the cutest of the bunch and is much loved here at the shop, haha. It'll be sad to see her go!
little maggie
Well-Known Member
She's a perfect Pisces vape. It looks like the timing will be perfect.
Isn't it interesting how individual all of our vapes are even though some of us are using the same patterns.
@little maggie I have thought about that often! Each one turns out having its own unique personality... it's really something I did not expect. It's been really cool to work in this collaborative way.
Really excited to see this batch nearing completion. Eagerly waiting for 030 to ship!
I got my blackwood stems from Alan in the mail last week, and I think they're going to look great in my Nomad. One of them is a 14mm water adapter and the taper is so subtle due to the overall thickness of the stem, I think it's going to look incredible.
I got my blackwood stems from Alan in the mail last week, and I think they're going to look great in my Nomad. One of them is a 14mm water adapter and the taper is so subtle due to the overall thickness of the stem, I think it's going to look incredible.
Montezhuma
Active Member
Thanks for your thoughtful review.
I had never thought to do that! Genius dude.
And I have tested di-electric grease, the best stuff I could find, And don't ask me why...but it doesn't work nearly as well as plain ol' Vaseline for the internals of the button. Vaseline won't harm the wood or have that grease smell either. If you want to test the grease I welcome your findings as a fellow tinker-er!, just check to see if it's plastic compatable with acetal and teflon, most of them should be. Also be sure it doesn't contain silver, as this type of conductive grease could short the button if it was applied very liberally.
I have to say, because I really didn’t go over it much in the review. While it wouldn’t discourage my choice to buy it, this vape is a pain to clean. My god I had no idea how much work it was going to be to service the button assembly, just setting those magnets about gave me an aneurysm. Wouldn’t trade it for anything though, nothing is as on demand as this guy. I can’t control my vapor any better than anything short of a log vape.
Even my milaana, which is pretty polished for an unregulated vape, couldn’t match what the Nomad has going for it. It and the lil bud both suffer from their fix bowl positions, and limited heater function. Not saying their bad vapes, they have their merits. My lil bud is down for the count due to my incessant tinkering, but it also didn’t do well for me because of its wide open airflow. The nomad has that problem too, but that can be fixed with a piece of cork, or some glass between you and it. I really want a 14mm stem for this vape, as well as more chamber capsules. Anyone know where I could get one made? Looking @Dan Morrison for a way to get more of those caps, as well as screens and regular stems for in the future.
@Montezhuma , There is a very particular trick to putting the magnets back into the button. Without this trick, it's near impossible! The trick is so simple and makes things much much easier. As you can imagine, tiny magnets that want to be apart from eachother are unruly at best!
It's best explained with photos, which are coming in my all new updated usage tutorial coming as soon as I possibly can. All efforts going into shipping at the moment.
I didn't think you would be dissassembling the button so soon, but a fellow tinkerer understands! hahah. Now that you've done it, should be good for a long time. I think the lst time I had my button apart was six months ago..ish..
It's best explained with photos, which are coming in my all new updated usage tutorial coming as soon as I possibly can. All efforts going into shipping at the moment.
I didn't think you would be dissassembling the button so soon, but a fellow tinkerer understands! hahah. Now that you've done it, should be good for a long time. I think the lst time I had my button apart was six months ago..ish..
little maggie
Well-Known Member
Is what you're reporting tinkering or something necessary with the nomad? I have motor problems and am low tech so hoping that the nomad requires minimal work.
Montezhuma
Active Member
Well...
A little of both. If you’re nomad is acting funny, I.E. a warm button backplate, heater not firing; you will have to take it apart. Once it’s cleaned and functioning properly, there’s not much to it, just empty and clean your stems, degrease the device when needed. It’s a wood vape, so upkeep is very very necessary. What I did was wash my hands with dish soap, washed them again and left some soap and water on my hands, then wiped them with a paper towel and used that towel to rub the sleeve. I had coated it in di grease, so maybe it won’t be necessary for everyone. Since cleaning, I’ve had no issues.
Where are the current users sourcing new stems, I really want a 14mm stem so I can use this thing to it’s full potential. If it’s in the thread somewhere, please let me know.
A little of both. If you’re nomad is acting funny, I.E. a warm button backplate, heater not firing; you will have to take it apart. Once it’s cleaned and functioning properly, there’s not much to it, just empty and clean your stems, degrease the device when needed. It’s a wood vape, so upkeep is very very necessary. What I did was wash my hands with dish soap, washed them again and left some soap and water on my hands, then wiped them with a paper towel and used that towel to rub the sleeve. I had coated it in di grease, so maybe it won’t be necessary for everyone. Since cleaning, I’ve had no issues.
Where are the current users sourcing new stems, I really want a 14mm stem so I can use this thing to it’s full potential. If it’s in the thread somewhere, please let me know.
Last edited by a moderator:
GetLeft
Well-Known Member
Still waiting on my Nomad but the three or four wood vapes I already have require pretty much zero maintenance (the screen, basically). I can't imagine the Nomad will require much more (if any more) upkeep.
little maggie
Well-Known Member
I am not likely to take mine apart if there's a problem. Hopefully I can send it back to Dan for repair.
SloJimFizz
Unknown Member
The contacts in the button and the cell/heater holder inner will eventually have to be cleaned occasionally to maintain optimum performance. I noticed the warmer button and slower developing vape, even with a fresh cell about the 5-6 month mark. After the button cleaning, the vape performs like new.
Not unlike the Milaana needing the disc cleaned of patina to ensure good power flow, just a little harder to get to. And unlike other wood vapes whose buttons are rated for a finite number of button presses before failure, Dan's button feels built to last a lifetime. Really not much to go wrong the way it's made.
I thought about you @little maggie and how your button cleansing was going to happen, and you may be better off sending it in to Dan like you mentioned. Especially the new magnet driven button sounds a little trickier than the spring driven one.
@little maggie , If you ever have a problem with cleaning the button, Id be happy for you to send it back to me for maintanence. I would also try my best to help you with anything that might things easier for you, just ask and I'll see what solutions we can come up with.
I had an idea for a special tool that would make dissassembly of the button, and re-installation easier. Some sort of easy grip tool that aligns itself with the screw...or something like that.
We can work something out! I'll do my best. I'll send your Nomad out pre-assembled and tuned so that everything has a looser, easier fit. And hopefully it'll last you a good long time before you need to think about cleaning anything.
I had an idea for a special tool that would make dissassembly of the button, and re-installation easier. Some sort of easy grip tool that aligns itself with the screw...or something like that.
We can work something out! I'll do my best. I'll send your Nomad out pre-assembled and tuned so that everything has a looser, easier fit. And hopefully it'll last you a good long time before you need to think about cleaning anything.