• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.
I bought a new cap during the Dynacoil sale, and the one I got is numbered like the Shadow M caps. Did anyone else receive one of these?

newcap.jpg
That’s pretty rad. :peace:
I wonder if this is the new norm??
 

seki

Well-Known Member
That’s pretty rad. :peace:
I wonder if this is the new norm??

It could be. Maybe for inventory control?

The other thing odd about the cap is that this pic was taken after about 40-50 heating cycles in a Portside Mini. You can't tell from the lighting in the pic, but the cap is still silver and shows very little signs of being heated.

Every single one of my caps showed signs of heat tempering after a single use of a torch or an IH.
 
It could be. Maybe for inventory control?

The other thing odd about the cap is that this pic was taken after about 40-50 heating cycles in a Portside Mini. You can't tell from the lighting in the pic, but the cap is still silver and shows very little signs of being heated.

Every single one of my caps showed signs of heat tempering after a single use of a torch or an IH.

Hmm interesting...I wonder what’s different.

I just ordered some extra Ti screens and a cap from puffitup so we’ll see if this cap is numbered.
 
Last edited:

Andy Capp

Well-Known Member
Accessory Maker
whznvd.jpg
“The 12 Milli B” - The Braided Series by @andycappcreations

Brass on titanium, made from solid with a faded braid and 62mm fits a DV standard condenser. I’ll be able to make these with a variety of finish options. Available soon !

“The First One is Free” Giveaway is coming soon as well as other #dynavap accessories. I will host this on instagram @andycappcreations

https://www.instagram.com/andycappcreations/
 
Last edited:

Ramahs

Fucking Combustion (mostly) Since February 2017
whznvd.jpg
“The 12 Milli B” - The Braided Series by @andycappcreations

Brass on titanium, made from solid with a faded braid and 62mm fits a DV standard condenser. I’ll be able to make these with a variety of finish options. Available soon !

“The First One is Free” Giveaway is coming soon as well as other #dynavap accessories. I will host this on instagram @andycappcreations

https://www.instagram.com/andycappcreations/

Ooohh...dat's purdy!
 

sirwalter

Well-Known Member
don't worry, you won't hurt the cap. I always heat a bit last the click with concentrates and hash and I also use @Phattpiggies Dip and Sip method where you don't allow the cool down click to occur until you're done.

I always heat past the click using my induction heater...but I've never had to go as far as I find I need to for the dynacoil. George suggested that using the dynacoil we should still follow the clicks. I haven't had any luck doing that.

Something for people who need opulence!

I was in houses with dirt floors and VCR’s.
“M” make’s me grateful!

PRECISELY MEDICATED in a CIVILIZED STATE of CANNABIS LIFE!

With its adjustable bowl size, I find the omni is actually less expensive to own and use in the long run than my m.
 
Last edited:
I always heat past the click using my induction heater...but I've never had to go as far as I find I need to for the dynacoil. George suggested that using the dynacoil we should still follow the clicks. I haven't had any luck doing that.



With its adjustable bowl size, I find the omni is actually less expensive to own and use in the long run than my m.
If I go past the click using my IH with flower it’ll almost always combust...at least on the second hit.

With the coil I go about 2 seconds past the click and have been getting great results.
 

sirwalter

Well-Known Member
If I go past the click using my IH with flower it’ll almost always combust...at least on the second hit.

With the coil I go about 2 seconds past the click and have been getting great results.

Interesting..which induction heater are you using? I have one of Pipe's. It came with instructions to go to 2-3 seconds past the click. I find thats required. If I just go to the click I get almost nothing. Combustion happens more around 4 seconds past the click. Thats just normally using a vapacp- not the dynacoil.

The dynacoil, Im finding requires me to go well past the click- whether I use a torch or an induction heater.
 
Interesting..which induction heater are you using? I have one of Pipe's. It came with instructions to go to 2-3 seconds past the click. I find thats required. If I just go to the click I get almost nothing. Combustion happens more around 4 seconds past the click. Thats just normally using a vapacp- not the dynacoil.

The dynacoil, Im finding requires me to go well past the click- whether I use a torch or an induction heater.
I have pipes PSM
I do not remember the instructions saying to go past the click though.

I can go past the click on the first hit by about one second and be OK but if I go past to click on the second hit... then it’s usually combustion time.

I respect the click.

What kind of concentrate are you using?
 

sirwalter

Well-Known Member
I have pipes PSM
I do not remember the instructions saying to go past the click though.

I can go past the click on the first hit by about one second and be OK but if I go past to click on the second hit... then it’s usually combustion time.

I respect the click.

What kind of concentrate are you using?

Here's a link to Pipes induction heater info:
https://docs.google.com/document/d/1_202eBzWeF7rkTjqV5sWumPxtbSNtfjqOZEs1i9d16k/edit

"To activate the heater, you simply press the VC strait into the hole until you feel/hear the tactile switch engage and LED light goes on. Once the VC clicks, wait another 3-4 count before removing to inhale."

I stick with 3 seconds personally. I've never had combustion doing that.

I've only had the coil a few days but I've tried shatter, crumble and live resin/sauce. They all seem to behave the same. I only get results if I really go past the click by several seconds.

I played around with it some more last night and found I can get nice results if I just disregard the click-it works particularly well through water. Dry, I wasn't enjoying nearly as much.
 
Here's a link to Pipes induction heater info:
https://docs.google.com/document/d/1_202eBzWeF7rkTjqV5sWumPxtbSNtfjqOZEs1i9d16k/edit

"To activate the heater, you simply press the VC strait into the hole until you feel/hear the tactile switch engage and LED light goes on. Once the VC clicks, wait another 3-4 count before removing to inhale."

I stick with 3 seconds personally. I've never had combustion doing that.

I've only had the coil a few days but I've tried shatter, crumble and live resin/sauce. They all seem to behave the same. I only get results if I really go past the click by several seconds.

I played around with it some more last night and found I can get nice results if I just disregard the click-it works particularly well through water. Dry, I wasn't enjoying nearly as much.
Our units are definitely different then.
Just yesterday I accidentally went past the click about one or two seconds on my second hit and combusted immediately.

Interesting that there’s that much variation.

Sounds like you should be going several seconds past the click on concentrates then.
I am going 2-3 seconds past the click and getting great results with the coil using rosin.
 
I mean that’s the whole point of the vapcap click is to tell you its up to temperature right?
so I’m not sure why you would need to go so far past that.

Interesting though I’m curious to hear others’ experiences on this.
 
Top Bottom