Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
@just_the_flu my man can you remind these kind folks how you fixed that reclaim issue again? I don't remember either... But I'm stoned, what's THEIR excuse?
Roth
Pining for the Mountains
Pretty sure you're talking about:
@Hogni I saw you asked if I leave the vrod head on the bowl. No almost never. The crud at the bottom of the vrod is reclaim. I have a new vrod same thing happens. I just take big dabs and a lot of them. Here’s the pics
That is due to the user leaving the Vrod head on the bowl. If you leave the head on the bowl when you're not inhaling, vapor can start to backdraft up into the head. After a while the reclaim starts to build up.
The quick and easy solution is to make sure you're always drawing air through the unit if the head is on the bowl. If you haven't taken a hit yet, it doesn't matter obviously since no vapor has been formed to collect on the head yet.
I follow this procedure and have never had any reclaim build up on any of my FP heads, Vrod or SH.
Hope this helps.
Haha I didn't even tag the right person, I give up! Sorry @just_the_flu , good thing @Roth is on the case! 
Might as well say what up to @Likes2vape
hope ALL of you good sirs are fogging the room up heavily this afternoon 
Might as well say what up to @Likes2vape
hope ALL of you good sirs are fogging the room up heavily this afternoon 
thekayo
Well-Known Member
Hey guys! reading around on some other threads I came across this bio gasification that the sublimator talks about and quite a few users insisting that the sub gets you higher with less weed and gives you more vapor. For me I have not tried it but I could not imagine it being much better than the flowerpot. Ok so get this I want some people to try this and tell me what you think. Turn ur nail up to 750f. Really hot I know and i have combusted at this temp quite a bit oops 
But that was with 1/2 full bowl or 3/4. This is where I thought i would try something new. I put barely any weed like less then 0.1 a few crumbs in just the middle of the screen. Now vape it {EDIT} slow-medium speed WITH THE CARB CAP ON!! make sure you put just a small amount of weed so you do not combust. But I am getting big tasty smooth hits and left with some very even dark dark brown avb. STAY VAPED
But that was with 1/2 full bowl or 3/4. This is where I thought i would try something new. I put barely any weed like less then 0.1 a few crumbs in just the middle of the screen. Now vape it {EDIT} slow-medium speed WITH THE CARB CAP ON!! make sure you put just a small amount of weed so you do not combust. But I am getting big tasty smooth hits and left with some very even dark dark brown avb. STAY VAPED
Last edited:
Hey guys! reading around on some other threads I came across this bio gasification that the sublimator talks about and quite a few users insisting that the sub gets you higher with less weed and gives you more vapor. For me I have not tried it but I could not imagine it being much better than the flowerpot. Ok so get this I want some people to try this and tell me what you think. Turn ur nail up to 750f. Really hot I know and i have combusted at this temp quite a bit oops
Haha where's my 777F high rollers club at? We used to post about high temp Showerhead vaping, it's very unique, hardest flower hits I've ever had, very stony. If you ramp up your draw speed you can crush bowls without overcooking them.
Stripzest
Offline
I've had the Showerhead for so long, and I've never went above 710. Guess I'll be trying out upper 700s tonight
Those are uncapped numbers BTW. Once you master the ramping speed draw it'll send you to the moon without tasting charred, it's legit. @YaMon knows
YaMon
Vaping since 2010
Yess mon! 747 and flying high!
@invertedisdead Thanks for the shout out!
Second Edit: I must admit I took a break (just this evening, at least up until now) from my beloved FlowerPot and hav been enjoying my Lil 'Bud, so much so that I am pretty lit! Cheers!
@invertedisdead Thanks for the shout out!
Second Edit: I must admit I took a break (just this evening, at least up until now) from my beloved FlowerPot and hav been enjoying my Lil 'Bud, so much so that I am pretty lit! Cheers!
Last edited:
Vaporware
Well-Known Member
I’ve used and recommended the ShowerHead at 777, and people have reported good results even a little above that, but draw speed is important up there to avoid combustion. I don’t think I’ve heard reports of success over about 800.
So far I’ve only taken the VRod up to 750 since a lot of people have suggested setting it ~25-30 degrees lower than the ShowerHead.
How high are you guys going on the VRod without scorching?
So far I’ve only taken the VRod up to 750 since a lot of people have suggested setting it ~25-30 degrees lower than the ShowerHead.
How high are you guys going on the VRod without scorching?
For those that don't leave their carb caps on for extended periods of time the bowl handles will also work for carb cap handles. Same 10-24 thread. The silicone is rated to 390f.
We are still working on the wood version spacing the wood away from the hot metal. to prevent discoloration.
https://www.newvape.com/flowerpot-solid-handle
We are still working on the wood version spacing the wood away from the hot metal. to prevent discoloration.
https://www.newvape.com/flowerpot-solid-handle
buddingglasshead
Well-Known Member
For those that don't leave their carb caps on for extended periods of time the bowl handles will also work for carb cap handles. Same 10-24 thread. The silicone is rated to 390f.
We are still working on the wood version spacing the wood away from the hot metal. to prevent discoloration.
https://www.newvape.com/flowerpot-solid-handle
That's how I've been using my carb cap since that version came out. I even sit it on 15-30 seconds before I hit to allow the carb cap to not be taking away that precious heat.
Could have sworn it was related to using the wrong carb cap ... ie. the d-nail halo carb cap causes this problem if I remember right ... (too close to the nut)
digitalninja
Member
hmm this doesn't sound like my problem...I am always drawing air if the bowl is on the bong, because otherwise the bowl will shoot a little bit of flower out when the water rushes back down (after hit). Hopefully that makes sense.
I've never had or heard of that happening ever, do you pack your bowl all the way to the top?
usefulbean
New Member
I was using the normal ones that comes with the flowerpot.
i have done this less than five times. But it was never touching the top piece.
pxl_jockey
Just a dude
This was on my wish list as a possible solution before the work on the wooden cap handle began, but now I’m not sure if it’s long enough. I hope y’all can find a way to make the wooden ones work. I’m still using the standard issue dabber rn w/ the high temp silicone tubing on it. And of course I never intentionally mean to leave it on the head, in fact quite the opposite, I’m constantly telling myself to pay attention and remember but this is my biggest problem with NewVape and my greatest complaint about the VRod comes into play:
It’s just so devastatingly great at what it does, it relieves my pain and relaxes me into a new reality where the carb cap’s existence can easily be forgotten. Most often I find the last ten minutes has evaporated as I’ve been staring off into space with a stupid smile on my face. More than once I’ve looked over and yanked the carb cap off mere seconds before the tubing melted into molten lava. True story. And I blame you Edwyn @NewVape710 for designing the device that enables me to easily forget a multitude of things, up to - and including, the carb cap smoking over there on my VRod heater. The VRod is devious imo and likes to sneak up on ya, leaving the user blissfully incapacitated. But I’m an easy-going, naturally forgiving bloke so if you’ll just send me a couple of those end-cap samples, I will no longer hold it against you for designing & refining the doom of so many afternoons. Sound fair?
I’m so happy that you’re actually making these!I’m a pretty pathetic combination of forgetful geezer and VAS-infected fool so I keep a little list of VAS/GAS targets or goals for the olde arsenal, prioritised so I don’t forget anything important. What I found personally was that NewVape kit is so premium, so addictive that it kinda naturally commands its very own syndrome designation on my list: NVAS. I had no more put the VRod together and there I was, already composing my next order. WTF?! And I know I cannot be the only one here who’s experienced this.
How does NewVape metal do that voodoo to us poor souls?
Never had any bowl blowback or any difficulty whatsoever in using my VRod, but do remember this happening in the old bong combusting days. But I always do what the boss (Edwyn) says in the video, so it’s a scoop or little less spread out over the screen. I’m always still drawing as I remove the head from the bowl, then remove the bowl and clear it. I just don’t understand how the herb can go flying?
Roth
Pining for the Mountains
Can definitely happen, just depends on your glass. My big Mobius Clear knockoff can have a little blowback if there's a decent amount of water and the user stops inhaling suddenly. But I pretty much run all my glass dry these days. Every now and then I'll put some water in for flower, but never do for dabs anymore. With the low temps possible on bangers these days, there's no need to smooth anything out, I want all those terps!
@digitalninja hope you figure it out!
muunch
hotboxing the cockpit
I found the same thing, but it does depend on the water level/perc for sure. Some rigs I had did it, others didn't. Easiest solution is to only keep the head on while drawing. After I take a hit, I'll pull the bowl out, clear the pipe, exhale, set the head down on the post, then I'll put the bowl back on... well after the water in the rig has settled.
I'm using my vrod tonight through a straight tube made by BrownGlass. Previously only used it for oil. Has an attached 2-hole perc and it straight blubs. Lots of airflow. Definitely more fun, and smoother with the vrod than I thought
MrSaturn
New Member
I get the flower blowback when I don’t pull the bowl off the rig fast enough, using the stereo matrix from the kit. Seems to happen regardless of how much I’ve packed the bowl.
My solution was to put another single screen on top of the flower (so I have a double weave bottom screen - flower - top single screen sandwich), which stops the problem and doesn’t seem to change airflow or taste to me. It does make it harder to stir but I find I get even enough results without stirring.