710 coils

Baron23

Well-Known Member
@710Coils - hi my friend. It was GREAT seeing you in your home town a week or two ago. After I left you, I did go to meet Sam and we had a wonderful meal on the west side of town on the water....then dabbed our brains out (well, my brains go rather quick!). Also, very nice to see your wife again, she is a lovely lady.

All - I did see the quartz bangers that @710Coils is working on. He had his early samples on hand and they are indeed beautiful.

As soon as they are in stock and on the site, I'm ordering a rig from him...25mm I think is good for me.

Cheers
 

Blargas541

Well-Known Member
I made a coupon for my FC people: $10.00 off your order at checkout

Just click the above link and when you check out. You will see $10.00 off your order :rockon: It does not count towards the clip kits since they are only $5.00 a pop, but if you are in need of clips and tight on funds. Shoot me a message and we will see what can be done to get you some clips :cool:

Its a start and I promise to continue to try and give back when possible. I have some giveaways planned in the next month and will also strive to give you all a better break once I have established myself a bit more :tup:

Also next week I will be adding my bangers to the site and they are gonna be sweet. I am working on some buy 3 pricing discounts for the people that like to buy bangers in 3s (You know who you are :wave:)
And a few other bundles around a full setup: Coil, Banger, Clip kit, Terp pearls

Will keep you posted and keep an eye out for updates over the next few weeks
That sounds great!

Question for ya, would your flat coil work with this setup? Or do I need a different size coil? I'm not too familiar with what size is standard for flat coils.

https://www.newvape.com/basic-flat-coil-enail-setup
 

Blargas541

Well-Known Member
Awesome! Appreciate the quick reply. I need to get a compatible e-nail still, once I grab that I'll pick up a few of your coils and some of these bangers.

Since you seem able to source some pretty hard to find stuff, have you ever seen any flat coil bangers? I found one website selling such a banger which has a flat coil attached to the bottom, it looked cool.
 
Blargas541,
  • Like
Reactions: 710Coils

710Coils

Well-Known Member
Manufacturer
@Blargas541 i will be carrying the axial coils and they are a flat coil combined with a barrel coil.
You get complete heat saturation and can enjoy lower temp dabs. @Shooby and a few others have been rocking them and can attest to their greatness .
You pair one of them with a quartz banger and you are in dab heaven.
I will also have barrel coils and they just don’t cover the bottom.
The one flaw to quartz is the high chance of breakage while you learn your way around it.
Hit me up with any questions and feel free to shoot me a direct message if you want to discuss further offl the thread
 

tepictoton

Well-Known Member
@710Coils : I think it might be a good idea to include pictures of the different coils here in the thread?

The very specific terms being used, such as axial coil, might be unknown to a lot of people?

Would make things a lot clearer for people new to the (c)oil game.

And sure, anybody can go to your site to see them, but having them here would ad an extra 'educational' value to your thread?

Love what you are doing @710Coils ! You see a need in the comunity and make it your 'job' to help us furfill that need. :tup:
 

sarkunit

Well-Known Member
@710Coil, I am planning on getting a 25mm set up, but you list only 24 and 26mm coils, how would this work? Will you have matching bubble caps available for the bangers that you will offer, and will they be mated to a coil before shipping if that is requested? I find it hard to find good 30 mm inserts so I am feeling like the 30 mm axial and banger set up might not be best over a long term. Do you have thoughts? Also, what controller would you pair with your coils? Would the Auber RDK 300 do the job? Thank you for your service, us medical patients appreciate good gear that keeps our lungs working for as long as they can :)
 

710Coils

Well-Known Member
Manufacturer
@sarkunit I have the 25mm barrel coils here: 25mm barrel. I dont have caps for sale yet. But the 25mm banger is a breeze to find a cap for. My bangers will have a beveled edge and that mates perfectly with a bubble cap of your liking. I can fit the coil to your banger and even toss you in a clip kit if you call it out in your order (Scouts honor) I will also be carrying 30mm Opaque bangers and they are other level when it comes to dabs. But the 30mm is a bigboy banger and can look obnoxious on smaller pieces =P

Bangers are looking to land Monday!!! that means I will have them up on my site by the evening and can start filling orders and shipping them out

I have one of each and rotate them out depending on the piece I am using. I know with the 30mm bangers, the little glass gram jars will fit perfectly inside a 30mm banger and several of my friends rock them for this very reason. They can get every last drop of goodness out of the jars without looking like Winnie the pooh :science:
But you honestly cannot go wrong with either and you can always add the other size later on when the time is right =)

@tepictoton
Here are more details for each coil type and please let me know if I missed anything or you have any further questions =)

Axial Coil: A coil that covers both the side and the bottom of a banger. These can be a bit harder to fit at times, but give much more heat saturation since they heat from the sides and the bottom. These coils have been seen in 24, 26, and 30mm sizes

Barrel Coil: A coil that only heats the sides of a banger. These are the more common coil you see around and range in sizes from 16, 20, 24, 25, 26, and 30mm


Flat coil: A coil that only heats the bottom of the banger. These are also one of the more common coils you see and they only come in one size. But can be made in any size when specified. Current size seen: 26mm

Watts: Coils come in an assortment of watts ratings and this is mainly for the quality of the internal wires as the higher the watts. The hotter it is rated to go. I only carry 150 Watt coils and plan to improve this to 200 Watt by default at some point. Most coils sold are 100 to 125 Watts. This means the internal wires are not rated for higher prolonged heating and can degrade faster due to this. This is why I only carry 150 and plan to increase to 200 Watt. So the internal wires are as high a quality as possible.

Volts: There are only 2 volts out there right now 110 for US and 220 for International. Beyond this, the coils are the same

Here are some pics of the above coils:

Axial:
thumbnail

thumbnail


Barrel:
thumbnail

thumbnail


Flat:
thumbnail

thumbnail


Hope this helps shed some light on the new coil verbiage that's been getting dropped =P
and I appreciate all the support :rockon:
 

sarkunit

Well-Known Member
@sarkunit I have the 25mm barrel coils here: 25mm barrel. I dont have caps for sale yet. But the 25mm banger is a breeze to find a cap for. My bangers will have a beveled edge and that mates perfectly with a bubble cap of your liking. I can fit the coil to your banger and even toss you in a clip kit if you call it out in your order (Scouts honor) I will also be carrying 30mm Opaque bangers and they are other level when it comes to dabs. But the 30mm is a bigboy banger and can look obnoxious on smaller pieces =P

Bangers are looking to land Monday!!! that means I will have them up on my site by the evening and can start filling orders and shipping them out

I have one of each and rotate them out depending on the piece I am using. I know with the 30mm bangers, the little glass gram jars will fit perfectly inside a 30mm banger and several of my friends rock them for this very reason. They can get every last drop of goodness out of the jars without looking like Winnie the pooh :science:
But you honestly cannot go wrong with either and you can always add the other size later on when the time is right =)

@tepictoton
Here are more details for each coil type and please let me know if I missed anything or you have any further questions =)

Axial Coil: A coil that covers both the side and the bottom of a banger. These can be a bit harder to fit at times, but give much more heat saturation since they heat from the sides and the bottom. These coils have been seen in 24, 26, and 30mm sizes

Barrel Coil: A coil that only heats the sides of a banger. These are the more common coil you see around and range in sizes from 16, 20, 24, 25, 26, and 30mm


Flat coil: A coil that only heats the bottom of the banger. These are also one of the more common coils you see and they only come in one size. But can be made in any size when specified. Current size seen: 26mm

Watts: Coils come in an assortment of watts ratings and this is mainly for the quality of the internal wires as the higher the watts. The hotter it is rated to go. I only carry 150 Watt coils and plan to improve this to 200 Watt by default at some point. Most coils sold are 100 to 125 Watts. This means the internal wires are not rated for higher prolonged heating and can degrade faster due to this. This is why I only carry 150 and plan to increase to 200 Watt. So the internal wires are as high a quality as possible.

Volts: There are only 2 volts out there right now 110 for US and 220 for International. Beyond this, the coils are the same

Here are some pics of the above coils:

Axial:
thumbnail

thumbnail


Barrel:
thumbnail

thumbnail


Flat:
thumbnail

thumbnail


Hope this helps shed some light on the new coil verbiage that's been getting dropped =P
and I appreciate all the support :rockon:
Oh man, that fitted axial looks beautiful. It's just right, and having opaque bottom quartz is what I am looking for. Thanks for the reply, I will make sure to shout it out in my order, but also if you need extra money for the mating of the coil and banger I fully understand. I wish everyone in the business did it like you, this reeks quality and high level service. I really appreciate that, because I am in retail as well. Rock on dude, you gots some money coming from this guy in Tucson Az. for sure.
 

invertedisdead

PHASE3
Manufacturer
@sarkunit the opaque quartz is the truth :rockon:

I get better vapor production than my SiC Halo. Despite the much higher thermal conductivity of silicon carbide, I think the bucket design of the quartz allows the oil to vaporize more efficiently than a trough style dish. There's more "direction" for the airflow to be pointed at to find an empty spot to conduct off of and vaporize.

Still loving my clip kit from 710coils, way better than wire wrap designs as it comes right off for easy cleaning access. Soaked in Simple Green and back at it!

I'm VASing for a sapphire insert but otherwise I can't hardly imagine a better tasting hit. Guess I need to try a terp pearl too though... :sherlock:
 

alittledabwilldoya'

Sapphire Powered Dabstronaut.
@710Coils when you get a chance could you post the Interior Diameters of your bangers?
Admittedly there may be a bit of variation between different bangers, but at least an approximate measurement would be good for pairing bangers with inserts.

:peace:
 

710Coils

Well-Known Member
Manufacturer
@alittledabwilldoya' They land Monday and I am going to be going over all the bangers to make sure they are to my specs.

The below specs I came up with were from all of my favorite bangers and the parts I really appreciated. Like the beveled edge. Why dont more glass makers do this???
I basically designed the ultimate enail banger for my globbing ways :science:

Here is what I had them made to for reference:

1. Joint: 10mm/14mm

2. Type: Male joint

3. Dgree: 90 degree possibly some 45 degree

4. Joint Color: Frosted

5. Bottom Thickness: 5 to 6mm

6. Features: Beveled edge flat top

7. Banger OD: 25mm/30mm

8. Overall length of bucket: 36 to 38mm

9: Neck joint: Closer to the top than the middle

10: Bucket wall thickness: 2.5mm

The last samples had the following Inner Diameter:

25mm: 20 ish mm
30mm: 25 ish mm

This makes sense since the inner walls measure 2.5mm as we would double this to equal the above difference.

One revision I foresee is making the neck a little further out from the banger before it curves. This is a minor detail. But the type of thing I am looking for as the big items have been worked out already

I will keep you all posted on how they meet up to my specs and also will post pics so you can see the unicorns I have been speaking of :tup:
 

710Coils

Well-Known Member
Manufacturer
Bangers and terp pearls landed today. Working on quality control and photos now. Will have pics up here in a bit and have them live on my site later tonight. They are really reallly nice. Better than expected nice

Just wanted to drop an update since I am lagging
 

710Coils

Well-Known Member
Manufacturer
Who would of thought it would take soo long to check bangers and terp pearls :science:

Everything looks great, I got to try out one of the 30mm Opaque bangers and its quite the ride :rockon:

I didnt want to post a crap load of pics and so I opted for some link action to a public folder full of banger porn :evil:

Links to pictures:

25mm Clear

25mm Opaque

30mm Clear

30mm Opaque

Dont forget about the coupon I made for my FC peeps: $10.00 off your order at checkout


Coils should be in next week and I will make sure to let everyone know when they land :clap:

Really appreciate all the support :peace:
 

ensabbahnur

Hash Vacuum
Picked up a few more things this morning, paid via PayPal, it didn't reflect the FC discount and I used the link, then at the final page after I clicked confirm order, it said my cart total had changed (although it didn't) and I needed to be aware and click again...still no discount. Honestly not a huge deal, and prolly a PayPal issue somehow. And I know everyone hates them but Ill toss out a vote for a few 18m bangers
 

Shooby

4ShOObY3 - IG
Who would of thought it would take soo long to check bangers and terp pearls :science:

Everything looks great, I got to try out one of the 30mm Opaque bangers and its quite the ride :rockon:

I didnt want to post a crap load of pics and so I opted for some link action to a public folder full of banger porn :evil:

Links to pictures:

25mm Clear

25mm Opaque

30mm Clear

30mm Opaque

Dont forget about the coupon I made for my FC peeps: $10.00 off your order at checkout


Coils should be in next week and I will make sure to let everyone know when they land :clap:

Really appreciate all the support :peace:


Opaque or quartz bottom option, Beveled Edges, Thick bottoms, high neck, smooth welds and made with GE214 standard quartz all for $40 or $45 shipped is a deal.. And you dont even charge more for a larger bucket!!! love that!

Thanks for hooking all of us up with some quality affordable quartz and coils!
 

sarkunit

Well-Known Member
Wow is all I have to say. One question, I still do not see axials on the site. Are you able to get them, or is there a date when they will be available? I want to pair a 25 or 30 (what ever shooby and sab suggest, gonna use it with a insert, I have a cca obsidian 30 right now but am happy to purchase one with the new set up;) ) with an axial as I had said in a previous post, and now I will be buying quartz beads as well. Lets help me make a decision, so I can place my order. MAN I AM EXCITED! good stuff, 710 coils, good stuff:clap: (by the way, just set up my account with you guys, I'm Ryan )
 
Last edited:

710Coils

Well-Known Member
Manufacturer
Tested out the Opaque bangers yesterday and the beveled edge makes for such a nice seal on a ball cap. Today I test the clear bottom bangers and so far so good =)

I got full stock of everything and am shipping out daily. Sometimes making a few runs to the post office so peoples orders get to them sooner than later.


Hit me up with any questions and hope everyone has a great day!!!
 

710Coils

Well-Known Member
Manufacturer
Whoever is using Instagram go follow my account. I have a 200 follower giveaway coming up and it’s pretty sweet.
2 25mm bangers Terp pearls, a coil, and clip kit

I am a little over 160 and climbing so it should be happening sooner than later
 
Top Bottom