Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

ReverendMobin

Active Member
As was already mentioned, the Ti version of the post doesn’t stick, and I believe NewVape also slightly modified the post’s head somewhere along the way to reduce sticking. Plus I think a lot of people just learned to deal with it without much trouble so they stopped talking about it. Mine’s always stuck very slightly on initial heat up, but it’s never been a big deal.

I had assumed reading through the thread that the bundle I had bought included the Ti post after all the initial complaints (still going through all the pages :D). Its not a huge issue - took a few seconds to realize how to jiggle it off. As I use it more, I think I'll just remember to pick it up during initial heat up.
 

ChurroForSure-O

Well-Known Member
This is the only thing I could think that you might be talking about:




Churro, you still rocking your 2 hole carb cap? Any further experimentation with it? I get my spheres moving with just the one hole, but I know they could be spinning quicker with directed airflow.

I ended up plugging the wider “stock” hole in the Vrod carb cap, and kept my smaller-diameter angled hole. It can spin a 5mm bead if it’s at the right level and angle, but you are correct. Two small angled holes would make spinning sapphire and rubies so easy. Still waiting on a glass master to come up with an airflow cap for the Vrod. I’ve really considered bringing one of my glass concentrate containers to someone to see if they can angle two holes into the top.

As somebody pointed out earlier in this thread, this very common size of container seals over a Vrod with a nearly perfect seal.
 

lasvideo

Active Member
Noob question...what do you folks find are the best ways to :
1.) Clean just the VROD assembly
AND
2.) The best ways to separately clean the SiC dish?
(I prefer alternatives to the "crank up the heat and let it burn" approach).
 

maxymods

Well-Known Member
Noob question...what do you folks find are the best ways to :
1.) Clean just the VROD assembly
AND
2.) The best ways to separately clean the SiC dish?
(I prefer alternatives to the "crank up the heat and let it burn" approach).
cant comment about assembly but i have been qtipping after each dab than dipping the other side of qtip in distilled water and wiping it off again and my sic dish is perfectly clean almost all the time
 

JCat

Well-Known Member
Accessory Maker
Noob question...what do you folks find are the best ways to :
1.) Clean just the VROD assembly
AND
2.) The best ways to separately clean the SiC dish?
(I prefer alternatives to the "crank up the heat and let it burn" approach).
I 2nd the qtip method ... and soak the dish in hot distilled water and scrub with qtips for that extra clean :)

99% ISO and rinse and dry for assembly
 

wall

Well-Known Member
Noob question...what do you folks find are the best ways to :
1.) Clean just the VROD assembly
AND
2.) The best ways to separately clean the SiC dish?
(I prefer alternatives to the "crank up the heat and let it burn" approach).
Nothing should really be getting into the unit itself that needs cleaning frequently so I would just q tip the threads and everything with iso if you feel so inclined
 

Alexis

Well-Known Member
thank you:wave:
I am hoping the VC and the FP will keep me happy between them:leaf:
Oh they will keep YOU happy alright, but just watch those green eyes whenever you put one down for the other! It brings a whole new angle to the tales of King Henry the 3.5 gram and his multiple vaporizers! :rofl:

(You just need another 6 vaporizers now if I remember the legend correctly) ;)
 

JCat

Well-Known Member
Accessory Maker
he he:lol: this phenomena whereby vaporization devices and paraphernalia quickly become compelling and endlessly fascinating..it's pretty damn consistent isn't it:o
I think simply browsing this site might be a sign you are at risk ... actually posting and that’s it ... it’s all over! You officially have VAS and it inevitably progresses over time ... no point in denial :lol:
 

Nina

Well-Known Member
I think simply browsing this site might be a sign you are at risk ... actually posting and that’s it ... it’s all over!
I dont even remember how I got here, I was having trouble sleeping, I borrowed a bit of bud from a friend of a friend and then I'm wandering down this soothing and totally absorbing rabbit hole.
I saw the FP on a website a while back and thought 'what is that'
'how much??'
Of course I can see now that it is totally worth the $$$:D
 

EmDeemo

ACCOUNT INACTIVE
Noob question...what do you folks find are the best ways to :
1.) Clean just the VROD assembly
AND
2.) The best ways to separately clean the SiC dish?
(I prefer alternatives to the "crank up the heat and let it burn" approach).

I'm a bad person and I just use recently boiled tap water and a wipe of the SiC dish :)

thank you:wave:
I am hoping the VC and the FP will keep me happy between them:leaf:

This is pretty much where I'm at! I own @Pipes project for my go to battery portable and thats it!

he he:lol: this phenomena whereby vaporization devices and paraphernalia quickly become compelling and endlessly fascinating..it's pretty damn consistent isn't it:o

See above :) I've owned many vapes but only ever moved on because they didnt quite satisfy. I've now settled on the VC, Pipes Project and the FP (VRod now).

I stay out of threads I dont belong in and it saves me a lot of money and pining (unless NewVape bring out a new product)! :D
 

wall

Well-Known Member
My VAS was basically cured last November when I got the showerhead and since then it’s just mutated into NAS (newvape acquisition syndrome)/NVAS with a side serving of GAS (lol glass)
I got an ssv not to long ago and I still want a cloud evo and I feel like I’ll have all the heavy hitter desktops
 

Nina

Well-Known Member
My VAS was basically cured last November when I got the showerhead and since then it’s just mutated into NAS (newvape acquisition syndrome)/NVAS with a side serving of GAS (lol glass)
so if your experience is anything to go by I may have swerved an intense case of VAS
yay:clap:
I can absolutely see myself getting GRAS*

*glass rig acquisition syndrome-I renamed it for you, hope you dont mind but no one wants to suffer with GAS now do they:lol:
 

lasvideo

Active Member
LOVING THIS NEW VROD!.

But find myself in a bit of a dilemma. As a child of the sixties I really enjoy weed. But here at 64 I find my tolerance somewhat high. I only vape after 4:20 so I can get stuff done in the daytime (retired) and save $$$. I was considering adding small concentrate use to my vaping. But my concern is the effect that will have on my already high tolerance. Lots of folks talk about how dabbing ruined their tolerance to THC. I really dont want that to happen, so I decided NOT to enter the world of concentrates. Its a shame since in the 60s and 70s I really enjoyed the intensity of hash. But I dont want to screw up my ability to enjoy weed as well. So for the moment Im holding off until I hear what you folks have to say.
 

invertedisdead

PHASE3
Manufacturer
But find myself in a bit of a dilemma. As a child of the sixties I really enjoy weed. But here at 64 I find my tolerance somewhat high. I only vape after 4:20 so I can get stuff done in the daytime (retired) and save $$$. I was considering adding small concentrate use to my vaping. But my concern is the effect that will have on my already high tolerance. Lots of folks talk about how dabbing ruined their tolerance to THC. I really dont want that to happen, so I decided NOT to enter the world of concentrates. Its a shame since in the 60s and 70s I really enjoyed the intensity of hash. But I dont want to screw up my ability to enjoy weed as well. So for the moment Im holding off until I hear what you folks have to say.


I vape all day every day, as soon as I wake up and right before I go to bed, probably done a dozen dabs before your first hit of the day assuming you mean 4:20 PM.

I know if I didn't start vaping until 4:20 PM I would be so high from my first hit that I could cut back probably 85% on material. If weed was cheaper would you still feel your tolerance was high?

How many ounces a week do you go through?

I don't find dabs really raises my tolerance, if it does its only because they don't wear on my throat like convection air. With as much self control as you've got over me I think you'd be fine!
 
Last edited:

Shooby

4ShOObY3 - IG
LOVING THIS NEW VROD!.

But find myself in a bit of a dilemma. As a child of the sixties I really enjoy weed. But here at 64 I find my tolerance somewhat high. I only vape after 4:20 so I can get stuff done in the daytime (retired) and save $$$. I was considering adding small concentrate use to my vaping. But my concern is the effect that will have on my already high tolerance. Lots of folks talk about how dabbing ruined their tolerance to THC. I really dont want that to happen, so I decided NOT to enter the world of concentrates. Its a shame since in the 60s and 70s I really enjoyed the intensity of hash. But I dont want to screw up my ability to enjoy weed as well. So for the moment Im holding off until I hear what you folks have to say.


I vape all day every day, as soon as I wake up and right before I go to bed, probably done a dozen dabs before your first hit of the day assuming you mean 4:20 PM.

I know if I didn't start vaping until 4:20 PM I would be so high from my first hit that I could cut back probably 85% on material. If weed was cheaper would you still feel your tolerance was high?

How many ounces a week do you go through?

I don't find dabs really raises my tolerance, if it does its only because they don't wear on my throat like convection air. With as much self control as you've got over me I think you'd be fine!


Shit, if i made it to 420PM, i start to wonder how much longer i can go and try to take a break. but by like 6pm, i fail and lose that mental battle.

Lately, i vape more extracts than flower. Thats mainly cuz good flower around me is crazy expensive for the time being. But when i do vape flowers using my FP Showerhead, it fucks me up. So like the man above me stated, i would agree that dabs dont raise my tolerance.
 

wall

Well-Known Member
I vape all day every day, as soon as I wake up and right before I go to bed, probably done a dozen dabs before your first hit of the day assuming you mean 4:20 PM.

I know if I didn't start vaping until 4:20 PM I would be so high from my first hit that I could cut back probably 85% on material. If weed was cheaper would you still feel your tolerance was high?

How many ounces a week do you go through?

I don't find dabs really raises my tolerance, if it does its only because they don't wear on my throat like convection air. With as much self control as you've got over me I think you'd be fine!
I want to start getting hemp in flower form and vape a lot more during the day

Update on my sticking VROD, talked with Ed and he’s getting me all squared away. It’s always exciting to receive such great costumer service
 
Top Bottom