• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

The Mighty/Mighty+ by Storz & Bickel

crownroyaldaddy

Well-Known Member
Capsule users -- remove the CU screen

(for capsule exclusive members only. private club)

Please

Resin condenses on the screen and plastic rims, builds, remelts down upon the capsule lid.

Don't worry about the missing screen. A well filled capsule only leaks a few bits.

(Edit : An under-filled capsule leaks a lot)

When at home, wipe CU inlet with q-tip or paper towel after dumping out capsule. If outside, you can wait a few sessions before wiping.

I've been doing this for well over a year. No more nasty sticky capsule lids.

Sounds like i need a crafty that is capsule exclusive so that I can take the CU screen out. Mine looks like it needs a replacement already.
 
crownroyaldaddy,
  • Like
Reactions: Vitolo

BigJr48

Well-Known Member
Hi guys,

I need your help :D. I am a proud owner of a new Mighty and I was wondering which is the best soft case for Mighty?

I am looking at RYOT cases but cant figure out which would be the perfect size?

The case should be smell proof, big enough to store Mighty, dosing capsule magazine and a brush + a few ISO wipes (big enough to fit everything mentioned above but at the same time as small as possible).

Which one do you use / suggest?

Thank you for answers and have a nice day!

I bought a Amazon Basic carrying case for a 5 inch GPS for $10 and it does everything.
 

Mr. Me2

Well-Known Member
Hi guys,

I need your help :D. I am a proud owner of a new Mighty and I was wondering which is the best soft case for Mighty?

I am looking at RYOT cases but cant figure out which would be the perfect size?

The case should be smell proof, big enough to store Mighty, dosing capsule magazine and a brush + a few ISO wipes (big enough to fit everything mentioned above but at the same time as small as possible).

Which one do you use / suggest?

Thank you for answers and have a nice day!
I use a small RYOT packratz for my Crafty and it’s perfect except there is not room for a capsule let alone a capsule magazine.

You may want to call Puff It Up. I think they carry that case and can tell you if everything will fit.
 

ChooChooCharlie

Well-Known Member
@crownroyaldaddy - apologies if I confused with my lame exclusive club humor. Was trying to say: only remove CU screen if you use capsules exclusively

Smiling_CUs.jpg
 

BigJr48

Well-Known Member
@weedy_1991 That case is able to carry the Mighty w/ stand along with the capsule mag and what other accessory you would need.

@ChooChooCharlie How's the airflow?
I stopped putting the lid on my capsules but I still keep the cooling unit screen.
Must say you're equipped with plenty of cooling units!!!
 

ChooChooCharlie

Well-Known Member
@BigJr48 - airflow isn't changed. I read about removing the CU screen in this thread, tried it, and had great success. No more sticky residue goo on the top of capsule lids. Before removing the screen, I would be constantly changing out CU's to avoid resin drips on capsules. One of the reasons I acquired so many CUs. Now my capsules always stay nice, never even have to clean them.
 

tdriver

Well-Known Member
I'm really interested in this too.....

AFAIK they don't replace housings.
if warranty exists, you get a new unit.

….if not...….. :rant:
 

blackstone

Well-Known Member
I'm really interested in this too.....

AFAIK they don't replace housings.
if warranty exists, you get a new unit.

My warranty just had a few days left when I sent mine back for some small cracks to be looked at (March 2018).
They offered to replace housing for free, or to supply a brand new unit for €79.
I opted for the new unit and later found out that it only carried over the few days from my old warranty, (I read somewhere that you always have 7 days to determine if you received a fully functioning replacement or not).
I also learned that if they were to offer a goodwill type discounted replacement for €248 at some point, then this would come with a full new warranty.

I'm in my third year of Mighty and I expect to get at least another one or two years from just my initial investment and the €79 top up. It definitely seems like the best type portable for me right now and I'm very glad I went for it, it helped me continue to completely kick the tobacco and burning for good.
I sold some portable vapes that were lying around and got a used Crafty based on my success with Mighty.
They are a great pair, I keep the Crafty quite clean and take it anywhere where 4-5 caps or less is enough.
I've come to accept that a better portable for me has yet to be released and I don't really need to buy another vape since finding this combo 6 months ago, I think I'm VAS cured as I'm buying some normal things again!

I was advised to go for a Mighty (Thanks FC!:tup:) because I was really sick of faulty, unreliable and melting rubbish from China at the time. So I found it hilarious that it worked perfectly every single time for me the whole 2 years, and the new one is the same.
 

ChooChooCharlie

Well-Known Member
Oh, how the Mighty have fallen.

Saw "split case" posts, and suggested ammobands many pages ago. Thought recent readers may find them useful.

One at top, one at bottom. Holds case halves together tightly, and gives a little "bumper-like" protection when laying Mighty down, also resists sliding.

Here's an amazon link: http://a.co/3XdQp0N

I've used stands myself, but saw frightening posts about using the orange tool as a kickstand ... These ammobands can help put Humpty back together again
 

Kiliam

Well-Known Member
Hi all

I have all my 16 capsules like this. I am going to buy a pack of 40 since they are so cheap but anyone know if there is a simple way of cleaning these? I already tried iso 99% wash. But the aspect of too much time in the oven and never washed never goes away (specially on the inside).
I just don't like to throw possible useable things away.
Thanks

image.jpg



PS - Also Mighty and Crafty user. One complements the other.
 

Kiliam

Well-Known Member
Since the beginning of the year when i started vaping.
I think i had to wash them like a pan with steel wool.
 
Kiliam,

vapviking

Old & In the Way
Hi all

I have all my 16 capsules like this. I am going to buy a pack of 40 since they are so cheap but anyone know if there is a simple way of cleaning these? I already tried iso 99% wash. But the aspect of too much time in the oven and never washed never goes away (specially on the inside).
I just don't like to throw possible useable things away.
Thanks

image.jpg



PS - Also Mighty and Crafty user. One complements the other.
You may have just let them go too long without cleaning; it would be a lot easier if done more often. I use 99% iso and it works just fine.
I would soak those parts in iso alcohol in a baggie that is suspended in real hot tap water, for at least an hour, then one by one scrub with the S&B brush while they're still soaking.

Of course if this is too much hassle then buying new ones is the answer, but if you like to be able to re-use things, the only solution I know for this is cleaning more often.
 
Top Bottom