paytonpenn
Level 30 Nature/Healer
.03 is normally my minimum if I'm being frugal or don't need a lot. Other wise the .05-.1g range is good.
Discontinued Haze Square
- Thread starter scottg402
- Start date
ginolicious
Well-Known Member
AJS
Calm Consistency
Boss called before I could finish the pods/bottom tray
Glad you like the vids. Let me know if there's anything you guys would wanna see
ginolicious
Well-Known Member
Boss called before I could finish the pods/bottom tray
Glad you like the vids. Let me know if there's anything you guys would wanna see
Personally I would like to see a full blown video. Kinda like your cloud video but more like your Milana video. Go through the grinding. Packing. And hits and the temps. I know you are a higher temp user. But yeah I like trying other people’s style of hitting the vape. See which I prefer right.
Oh man, this method would not have worked on my vape yesterday. It was disgustingly full of hash oil. Your fingers would be permanently stuck together after cleaning it if you didn't use a pound of qtips and excavation tools haha. But if you do this every day or two and you don't screw up everything by loading too much hash oil this is a great method. But if it's dirty at all, your fingers would be so gnarly after cleaning it like this. Thanks for the video though it's encouraging to know it's possible if you're a responsible stoner haha.
ginolicious
Well-Known Member
That video is basically how dirty I let my screens get. If I let them get any worse I don’t get visible vapor. One pod each. Once a tray is completed, boom needs to be cleaned. Sometimes I try to beat that system and then I just get terrible results. Was trying to do 2 trays before cleaning or see how dirty I could get them. Not worth it. Performance severely suffered.
frank grimes
Well-Known Member
I ordered one directly from Haze last week and they shipped it right away.
caseball2051
Well-Known Member
Did my first deep clean this morning. It wasn't bad at all. It took me a couple of tries to get everything back together correctly without the tool. I think on my third try I got it. I bet the tool makes this easier though.
I think that my random combustion episode was cleaning related after taking it apart.
I also took my coil out and made it sit better in the ceramic channel. It was easy to do. I used the technique haze posted earlier.
Excited to give the freshly cleaned and reassembled unit a try shortly.
I think that my random combustion episode was cleaning related after taking it apart.
I also took my coil out and made it sit better in the ceramic channel. It was easy to do. I used the technique haze posted earlier.
Excited to give the freshly cleaned and reassembled unit a try shortly.
More videos are coming shortly.
ginolicious
Well-Known Member
I could watch videos of this thing all day long. Not because I don’t know how to use it. But I enjoy the videos out there. Even the old Dual ones from Haze. I would make my own. But I can’t. Due to my profession and the job hunt I’ve been on for the last 6 months. Even if I don’t show my face don’t want an account associated with my internet footprint. And my current YouTube account has chewing tabacco reviews from 2007 and espresso machine reviews. Could make a new account but then there is still the issue of the internet foot print.
O-G-Reg
Well-Known Member
Last edited:
django7
Well-Known Member
Cleaning is very important for this vape, I’ll confirm that. I bought an extra set of screens and pods and always have one set clean or soaking in iso. Takes just a couple of minutes to swap ‘em.
Also, I just replaced my coil to see if it made a difference, and it did improve performance. I have a phase 1 unit, so my coil was pretty old.
Also, I just replaced my coil to see if it made a difference, and it did improve performance. I have a phase 1 unit, so my coil was pretty old.
ginolicious
Well-Known Member
I noticed today my coil is looking pretty dull as well. Going to need to replace it soon. Hoping to get another month out of it though. Getting some nice highs off this thing though. If I hold a light up or exhale right into a light I’m seeing tons of vapor that’s for sure. First two hits regardless if a fresh bowl always needs time to get the erb up to temp.
His_Highness
In the land of the blind, the one-eyed man is king
Got an email from POTV with a reference to a new Haze Square review from our very own @stickstones.
https://www.planetofthevapes.com/bl...140500533&mc_cid=435f1d6bf3&mc_eid=4dd591d152
https://www.planetofthevapes.com/bl...140500533&mc_cid=435f1d6bf3&mc_eid=4dd591d152
ginolicious
Well-Known Member
Great review. Enjoyed it. Draw speed is always questionable. Last night I was doing super slow and was getting lung busting vapor. Sometimes when I draw too slow it’s not enough air to produce vapor. It’s all based on the bud and right now I have super dry stuff. Just the way I keep my stuff. I would have also added in the review that the first two hits are basically just to bring the bowl to temp. So if you are looking for a one hitter like I use it, one hit and put it down for an hour, don’t expect to see huge clouds. You need to have 3-4 hits in a row to see huge clouds unless above 400F. My opinion. Not sure if others feel the same way.
Djsleepy
Well-Known Member
Good review !
Tips are something @Haze Vaporizers should look at..... to avoid unnecessary calls or emails........I know they are coming with vids soon... but I like to read my stuff and access quickly if needed....not as easy to do with vids.....
Tips are something @Haze Vaporizers should look at..... to avoid unnecessary calls or emails........I know they are coming with vids soon... but I like to read my stuff and access quickly if needed....not as easy to do with vids.....
Last edited:
Vapordeflor
Well-Known Member
Haze square is home... taking my first pods... this vape extracts!! took me 1 draw to realize draw speed (not very soft puffing, as I like). First impresion: Love the metal touch, very very potent vapor, LOVING the pure convection taste. Also my coil seem to have deformed since first draws, out of the box it wsnt touching the walls of the heater as shown:
Is this ok?¿ i have other coils so can replace it but is working ok... i think.
Congrats for this little wonder haze!
Is this ok?¿ i have other coils so can replace it but is working ok... i think.
Congrats for this little wonder haze!
ginolicious
Well-Known Member
Haze square is home... taking my first pods... this vape extracts!! took me 1 draw to realize draw speed (not very soft puffing, as I like). First impresion: Love the metal touch, very very potent vapor, LOVING the pure convection taste. Also my coil seem to have deformed since first draws, out of the box it wsnt touching the walls of the heater as shown:
Is this ok?¿ i have other coils so can replace it but is working ok... i think.
Congrats for this little wonder haze!
Coil seems fine. What do you mean about draw speed? You need to pull hard slow?
Just picked up an adapter piece for USB to turn it into USB c. Only paid $8.99
O-G-Reg
Well-Known Member
That doesnt look too bad. You’ll really want to bend the coil back if it starts lifting out of the housing.Haze square is home... taking my first pods... this vape extracts!! took me 1 draw to realize draw speed (not very soft puffing, as I like). First impresion: Love the metal touch, very very potent vapor, LOVING the pure convection taste. Also my coil seem to have deformed since first draws, out of the box it wsnt touching the walls of the heater as shown:
Is this ok?¿ i have other coils so can replace it but is working ok... i think.
Congrats for this little wonder haze!
Its really easy to do if you want to bend it more uniformly. Just pull it out with tweezers or anything.
Dont make the same mistake i did and take apart the whole unit, and endup having to thread a tiny sensor through the ceramic. (Yeah that tiny dot in the ceramics pac-man like mouth) which i really hope is a light sensor and not the temp sensor.
Note that the unit wont heat without both sides(why i think it may be a light sensor) , eventhough it flashes and goes green.... i was panicking hard for about 10 minutes.
Last edited:
Vapordeflor
Well-Known Member
Thanks for the quick replies ! i have already bent it back to shape (also tought to heat it without cover heheh)
I mean i dont have to draw slow or at least is what im doing this first sesions
I mean i dont have to draw slow or at least is what im doing this first sesions