StemPod by MPL

supershredderdan · Jul 4, 2018

Vape Donkey 650 said:
Right on for the detailed reply. I will check out those links later when i have more time.

Can i re-submit 2 questions for you:

Can i configure the stempod with bigger coils for 'glow free' vaping that still works reasonably as well as the smaller coils?

Are your recommended settings enabling the PI controller on the tuboevic software?

Thanks!

Yes, higher mass coils will require a lower TCR which in turn will mean a lower difference in temperature of the coil to temp of the load.

I don't remember if I have a p/I for tubo fw but with Arctic fox I have it on. Pretty close to stock values, smooths out the curve enough for me

ray_b said:
This is great, thanks! Is there a way to add an order for replacement parts to an existing order?

I don't believe so, in the next few days I can make a 0 shipping option for add ons for orders that haven't shipped. At least until we get the account system working better

Hogni said:
I've just ordered a StemPod with replacement stems and screens.
Dan, are the stems available in different colours and lengths?

They're all clear, some height varriance from 90mm to 105mm. Everything we have in stock is the same design seen on the site. We will have more stem variety soon

Also, stream up on insta for 24 he's, happy 4th friends

HerbieVonVapster · Jul 4, 2018

supershredderdan said:
I don't believe so, in the next few days I can make a 0 shipping option for add ons for orders that haven't shipped. At least until we get the account system working better

Awesome going have to decide now if the wood worth the wait. Would there be a option later to just buy the wooden box?

supershredderdan · Jul 4, 2018

HerbieVonVapster said:
Awesome going have to decide now if the wood worth the wait. Would there be a option later to just buy the wooden box?

Possibly, will probably offer stashpods on the store when we expand the variety of woods

cpk · Jul 5, 2018

@supershredderdan are we going to see some vids using concentrates? Thanks!

supershredderdan · Jul 5, 2018

I've added an option for shipping called "Ship with Preorder (for accessories)" use this option for any accessories you would like included with your StemPod shipment. For anyone that has paid shipping but wants everything together, let me know and I can reimburse the shipping

Summer · Jul 5, 2018

Evilevile said:
Is the same awesome logo that's on the 3d printed stashpod also going to be laser etched on the wooden one as well?
I notice we only see the back (or is it the front)

I think this is what it's gonna look like:

https://www.instagram.com/p/Bj-10a1lW2y/?taken-by=modpod_labs

hoyo77 · Jul 5, 2018

supershredderdan said:
Yes, they both have the same features and compartments

will there be an option to order the wooden stashpod if we want our stempods in july??

supershredderdan · Jul 5, 2018

hoyo77 said:
will there be an option to order the wooden stashpod if we want our stempods in july??

Possibly, will have to see how the stock turns out after we clear all preorders

Megaton · Jul 5, 2018

Damn, that countdown timer on the $45 off has really got my trigger finger itching!

Will these be shipping internationally directly from Dan? Or will there be potential EU stockists at some point in the future?

Summer · Jul 5, 2018

Dan published an IG livestream he finished a couple of hours ago. Informative.

PoopMachine · Jul 5, 2018

Ordered mine yesterday. I actually prefer the 3D printed case. I think it looks pretty spiffy.

Chill_Break · Jul 5, 2018

Watched the video. Man I'm so hyped for this. Also getting the 3D printed stash pod, mostly because I don't want to wait

Hogni · Jul 6, 2018

Can't see the vid anymore!?

Dan, does the XL8R by RBT also work with the StemPod?

AJS · Jul 6, 2018

The stashpod is awesome, unless you have a huge thing for wood, the 3d printed one is pretty sick. I'm stoked to see what the wood ones are like though.

Hogni said:
Dan, does the XL8R by RBT also work with the StemPod?

Just cuz I know the answer, it definitely works with the oring installed, and it should also seal pretty well without the oring, I believe I tested another rbt stem that fit without it. Actually, my US m2m seals perfectly without the oring so the xl8r should too.

Hogni · Jul 6, 2018

Thank you very much, Sir!

Evilevile · Jul 6, 2018

Why can't I watch any of these videos, dudes? Is it cause I'm using a tablet or phone? Please tell me they're backed up on YouTube. Sorry I'm a millenial, or something. I tried to watch it right after Summer talked about it too.

I should mention that when I tap his profile picture on IG, nothing happens.

Hogni · Jul 6, 2018

I guess you need the Instagram app installed? (Thanks @Summer for the advice :tup:

)

Dan, just a friendly advice and plea for the future. I tried to watch the current live vid but it was so hard to understand you. On the one hand bc english is not my mother language but on the other hand mainly bc your microphone was too far away and therefore your voice too dead and your music was waaaay too loud. I unfortunately had to stop watching after 15 m bc it was too ardously for me and I couldn't stand it any longer.
I think in general that playing music in such kind of vids isn't a good idea

Summer · Jul 6, 2018

Evilevile said:
Why can't I watch any of these videos, dudes? Is it cause I'm using a tablet or phone? Please tell me they're backed up on YouTube or something. Sorry I'm a millenial, or something. I tried to watch it right after Summer talked about it too.

I should mention that when I tap his profile picture on IG, nothing happens.

I have android, but there's no reason it shouldn't work the same on ios on both your phone or tablet. Yes, you need the app installed & you need to be following Dan & whomever you want to see livestreams by.

When you open up instagram you should see the stories (published previous livestreams) for those you are following, if any, along the top of the app & then you just click on it to play.

Or, if you click on the avatar for that person on the front post page, it will open up their page & you have to click on their avatar again to run the video. You know there's a stream available because it has the play button shown in the avatar.

cpk · Jul 6, 2018

@AJS what o ring are you talking about? I have a XL8R and it is not getting a good seal.

AJS · Jul 6, 2018

cpk said:
@AJS what o ring are you talking about? I have a XL8R and it is not getting a good seal.

The StemPod has an oring built in to make more stems compatible with it.

cpk · Jul 6, 2018

@AJS thanks for the quick answer.

Chill_Break · Jul 6, 2018

There are photos of the wood stash box up on the website now. I think i like the 3d printed one better.

HerbieVonVapster · Jul 6, 2018

Fred Friv said:
This is half of the reason I'm cheesed. The other half is that I've already used this potentially untested device well over 50 times and I have the sword of damocles hanging over me. And 2 small mouths to feed. Can anyone see how that makes me worried?

Both them look great. Thinking of picking up the wismec reuleaux 2/3. The red black version would look great with red case. Hoping this becomes my new out and about vaporizer. The milaana and sprinter more at home vaps.

ray_b · Jul 6, 2018

I wanted to check, is this the 3D printed StashPod that will ship with the StemPod? I think it looks good, prefer it over the cedar.

supershredderdan · Jul 6, 2018

ray_b said:
I wanted to check, is this the 3D printed StashPod that will ship with the StemPod? I think it looks good, prefer it over the cedar.

Yes but white

StemPod by MPL

Well-Known Member

Well-Known Member

Well-Known Member

Brother of the Leaf

Well-Known Member

Long Island, NY

Well-Known Member

Well-Known Member

Well-Known Member

Long Island, NY

Well-Known Member

Active Member

Honi soit qui mal y pense

Calm Consistency

Honi soit qui mal y pense

Well-Known Member

Honi soit qui mal y pense

Long Island, NY

Brother of the Leaf

Calm Consistency

Brother of the Leaf

Active Member

Well-Known Member

Well-Known Member

Well-Known Member