Likes2vape
Well-Known Member
The forked dabber from dnail is my absolute favorite next is the blade from NewVape. I don’t care for the ball points to much
Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
Basically that's the cause and effect. Dabs are generally still in acidic form (THC-a) so they will bubble off when exposed to heat, those bubbles will go all over the place including up the dab tool. Then if the dab tool like the dnail carb cap is placed back on it's cap any residual oil can move down the dabber.
VAPEHUNTER
Well-Known Member
That's pretty much my feelings on the scoop, really versatile for various consistencies, but the oil tends to run up the dabber, and the angle of approach with the Halo makes it hard to get that off without just wiping it off onto parchment or something.
I have a titanium paperclip similar to the pencil which is really good at getting the oil off, but the ball point also seems intriguing for its ability to fit in the corners of the dish.
The wedge looks like a pretty good daily driver dabber also, without the scoop for oil to stick to, though I wonder again about fitting a square peg in a round dab.
The original Lollicap I had came with a the tiny ball point dabber and I gave it away with my old FP. Regretted it ever since and just recently bought one again. Very happy to have it back.
Hi man, yes I bought the hybrid nail from planetvape.ca and im usimg that sic dish.
Maybe email planetvape.ca , they usually answer quick enough.
Also if in usa email highfive.
As mentioned the dish is more shallow, I always use carb cap, uncapped the ring effect is nuts on this dish. I will still buy the newvape one when it drops. It is neat to have the options of shallow and stock.
Also like I said us early adopters ( the ring effect clan?) Are the only ones who can go middle hole open or middle whole plugged.
ParanoidAndroid998
Well-Known Member
I use the ball point dabber constantly. I find it's good for bowl stirring as well cause the blunt tip glides over the screen.
I don't think the depth of the dish is affecting your hot spot as it wouldn't have any effect on the air inlet.
Danksta
Well-Known Member
@invertedisdead I still love the generic dental tools most vapes give you for free. I've tried glass ones and a couple Ti ones and I always go back to the simple dental tool. I use the small end ofc
I really think it has to be the shallowness. Maybe some physics going on we cant see.
But I know only with this shallower dish uncapped its bright green in the middle (pretty much unvaped) with just a ring of roast around the outside.
The air coming in is a few mm closer, this changes things. Ill do a bowl uncapped and show u. Its CRAZY
But I know only with this shallower dish uncapped its bright green in the middle (pretty much unvaped) with just a ring of roast around the outside.
The air coming in is a few mm closer, this changes things. Ill do a bowl uncapped and show u. Its CRAZY
@Danksta I think its the roundness and lack of mass that make those tools so effective at getting the oil off before it runs up the dabber via capillary effect. My little Ti paperclip works bitchin but it's not threaded and I kinda like having the carb cap and dabber in the same hand, although the heat build up is a trade off for multiple dabs.
Might have to try the D-nail fork though too. Friends is the Dnail fork 10-24 threaded also?
Have you tried hitting it without the SiC dish installed? I don't doubt that the ring goes away with the carb cap, mine does too, but I would be pretty surprised if the dish was the cause.
Might have to try the D-nail fork though too. Friends is the Dnail fork 10-24 threaded also?
I really think it has to be the shallowness. Maybe some physics going on we cant see.
But I know only with this shallower dish its bright green in the middle (pretty much unvaped) with just a ring of roast around the outside.
The air coming in is a few mm closer, this changes things. Ill do a bowl uncapped and show u. Its CRAZY
Have you tried hitting it without the SiC dish installed? I don't doubt that the ring goes away with the carb cap, mine does too, but I would be pretty surprised if the dish was the cause.
You should try one with no dish installed for highence
just straight titanium 
I'd help you test but.... I REALLY gotta take this dab
I knew you would know!
I coulda swore I saw it in the thread, but sometimes I get too ripped to be certain
All of your feedback has been with dabbing on the SIC dish. How's the FLOWER performance treating ya?
Ring. Got it. I see now.
Its not lasting tho. As I get towards the end of the bowl, the centre is filling in brown and the outer ring is not overly darkening.
In fact, now I'm at the end of the bowl, I cant even see that there was a ring.
So I guess performance is... different to the SH rather than less. The OGFP, the localised vaping that had NEEDED stirring, whereas I purposefully havent stirred this bowl once and its evenly browned.
585f. Half full bowl of flower, no dab.
eckstant
Member
I received my vrod last night and it's awesome, got super high on accident. I have 1 question though, is the double-weave titanium screen supposed to be so loose in the bowl? It just drops in there and falls out when I empty the bowl, tried 2 of the screens they included and both are the same, kinda annoying.
Yep, get the double weave and that issue goes away
YaMon
Vaping since 2010
18mm as it's bigger and bigger is better!
I found this when I switched from
to this:
Both I purchased from NV. The later with the single shower head is free flowing to the point where it takes a significantly higher temperature and/or capping to have the same cloud density as the first larger piece, and I'm typically on cruise control with that one and a ash catcher at 747 degrees.
I really think it has to be the shallowness. Maybe some physics going on we cant see.
But I know only with this shallower dish uncapped its bright green in the middle (pretty much unvaped) with just a ring of roast around the outside.
The air coming in is a few mm closer, this changes things. Ill do a bowl uncapped and show u. Its CRAZY
I think it's due to Marangoni/thermocapillary flow which calls out the temperature-dependent surface tension.
Vape on! Respect! -YaMon
ParanoidAndroid998
Well-Known Member
I own the D020-D which is similar to that side car single matrix, but the first one you posted (double matrix) is exactly what I've been looking for. Dunno how I missed it. Can you talk a little more about how you like/dislike it?18mm as it's bigger and bigger is better!
I found this when I switched from
to this:
Both I purchased from NV. The later with the single shower head is free flowing to the point where it takes a significantly higher temperature and/or capping to have the same cloud density as the first larger piece, and I'm typically on cruise control with that one and a ash catcher at 747 degrees.
I think it's due to Marangoni/thermocapillary flow which calls out the temperature-dependent surface tension.
Vape on! Respect! -YaMon
Edit: On second thought, if it's the same size as this one, I'm not interested. I'm looking for a shorter version.
Last edited:
Baron23
Well-Known Member
This ^^