Cheap High Quality Bubbler

LesPlenty

LesPlenty

Well-Known Member
Company Rep
Last edited:
MegaMan2k

MegaMan2k

Well-Known Member
Thnaks LesPlenty, for that recommendation,
since i will be "needing" one of these guys, im going to be ordering one in the next few days,
just want to look at a little more glass first :D


;When it comes to tolerance / concentrates / flowers,
flowers for low tolerance times or micro dosing,
but if im on that high tolerance (+5g flower/day) i only deem it logic to dab 1 gram of melt instead.
 
LesPlenty

LesPlenty

Well-Known Member
Company Rep
22-5cm-tall-matrix-sidecar-bong-birdcage.jpg


I have this on order and hope it will be the best so far, I have seen a lot of good reviews and like the angle of the neck, my other bongs necks are almost straight, this gets around that problem.
 
ataxian

ataxian

PALE BLUE DOT
LesPlenty said:
22-5cm-tall-matrix-sidecar-bong-birdcage.jpg


I have this on order and hope it will be the best so far, I have seen a lot of good reviews and like the angle of the neck, my other bongs necks are almost straight, this gets around that problem.
Click to expand...
I have this one however the UFO from FC is better 4 me?
Da removable mouthpiece is ideal 4 me!
A MALE down stem (like a giant Ash Collector is what is my request so I can use a JHOOK 4 a mouthpiece?)
Get what work's 4 U?

I like this piece sometimes? (I reduce the mouthpiece)
We have different need`s?
Medical or Recreation can be a factor?
 
ataxian,
psychonaut

psychonaut

Company Rep
Company Rep
LesPlenty said:
22-5cm-tall-matrix-sidecar-bong-birdcage.jpg


I have this on order and hope it will be the best so far, I have seen a lot of good reviews and like the angle of the neck, my other bongs necks are almost straight, this gets around that problem.
Click to expand...

I find it to be an ergonomic piece. Really good for flowers as it's smooth. Hard to find dropdowns though.
 
LesPlenty

LesPlenty

Well-Known Member
Company Rep
ataxian

ataxian

PALE BLUE DOT
ataxian,
Hogni

Hogni

Honi soit qui mal y pense
The angled mp will not fit w/o an 18m<->18m adapter.
That would be a real low rider bubbler! Do you intend to put your chin on the table while drawing? ;)
 
Hogni,
  • Like
Reactions: Alexis
A

Alexis

Well-Known Member
Hogni said:
The angled mp will not fit w/o an 18m<->18m adapter.
That would be a real low rider bubbler! Do you intend to put your chin on the table while drawing? ;)
Click to expand...
Maybe an angled adapter? Or several, like scaffolding to go 360 round for a comfortable mouthpiece height and position.:tup:
 
Alexis,
  • Like
Reactions: Hogni
LesPlenty

LesPlenty

Well-Known Member
Company Rep
Hogni said:
The angled mp will not fit w/o an 18m<->18m adapter.
Click to expand...
True, I already have a couple adapters, a male joint on the mouthpiece would be better but I cannot find one .

Hogni said:
That would be a real low rider bubbler! Do you intend to put your chin on the table while drawing?
Click to expand...
LesPlenty said:
while reclined with the feet in front of the heater.
Click to expand...

I always vape while sitting in my recliner chair, my beer gut is my table, it is probably more of a chocolate gut as I seem to have taken up eating since giving up smoking.:)
 
Joaon

Joaon

Well-Known Member
Joaon said:
All that recent talk about dropdowns reminded me how bad I want one, but a specific one:

nU3S8rZ.jpg


A dropdown with reclaim catcher AND carb hole !? What? Holly Molly Guacamolee :drool:

Do you think Steven would be interested making one similar? :luv:


YAiC2FI.jpg

(bowl of reclaim catcher is in wrong side, but you got the idea)
Click to expand...

Joaon said:
:ninja:

I don't know how many of us would be interested in a dropdown adapter like I posted earlier, with a reclaim catcher and carb,
but still I contacted Steven via his Dhgates store, to ask him what he thinks of it..

How do you think it should be designed?
18mm top and arm joint, 14mm reclaim jar and carb?


a couple more pics to get the idea
s-l500.png

(without carb )

bOCkxBx.png

(Sublimator reclaimer, no dropdown..)

:peace:
Click to expand...

So apparently Steven is okay to do a such piece, they are waiting my drawings to produce it!
So 14mm bubbler joint, 18mm vaporizer joint, what size of reclaim bowl and carb? 14 mm?
I think this piece need to be as small and compact as possible, with dropdown at 45°angle, and vaporizer joint at the same height than bubbler joint. Is that all ? :hmm:
I'll post my drawings later when they are done


Hogni said:
Does anybody have experiences with this piece from Steven?

60f4696ea6f7571ba7d619789cd52460.jpg
Click to expand...

I LOVED my Sasquatch @latulipe999 gived me! :luv:
Such a unique piece, very classy, nice perc, interchangeable downstem..
You can even drill a hole on a countertop, to drop the sasquatch into ! :sherlock:

But being clumsy with glass.. It ended with a broken mouthpiece :\


One day I'll get one back :ninja:

 
Hogni

Hogni

Honi soit qui mal y pense
@Joaon thanks for your engagement, friend! 14mm for the reclaim catcher should be fine. But as I said before take care of the angle of this setup that it doesn't bother fitting into a wider deware style bubbler.

Yep, the Sasquatch is getting one of the top 5 of my GAS. But would never use it in a sesh with my clumsy (my own clumsiness is more than enough) friends. I already hear a damned *ouuups!!?* by one the baked fuckers.

@Ramahs That is absolutely great! Construction and look are awesome! Doesn't happen often that I'm falling in love with a glass piece at once. Do you know the price of that? Fear it's unreasonable expensive as nearly all stuff from American glassblowers?
Does he do that on demand?
 
LabPong

LabPong

Well-Known Member
I have a new fav setup. My old one was a stereo matrix clone....which works awesome for the heavy hitter vapes like Elev8r and flowerpot. But I would then not use it when vaping with my vapcap or arizers. So I have a smaller D020 or something for those.

Now I can use any vape well with this setup.

Y9tSBDh.jpg




Below shows my tweak that has worked out incredibly well. I put a narrow shafted slit downstem in the main one. This allows for a much more controlled and softer bubble/water action. It barely takes away any draw resistance.....but what little bit it does.....you get huge control over the draw pressure with it. I would like to try a showerhead type of downstem or something like that later to see if there is any difference.

cuqClJ1.jpg





As for using an adapter on these wide topped cans....you will need to either get one that has a big horizontal gap on the top connector.....or raise it up like I did. The 2 step joint on the small downsteam is a 14/14mm one as I could not find a 18mm male that would fit so the perc is down low enough or not touching the bottom of the main perc. But most of the 18mm joint downstems are a wider diameter tube. So the 14mm ones offer more condensing and muffle the "chug" really well.

I did first try one of the 18mm ones and ended up cutting off the slits to make it fit into the lower perc at the right level. It definitely worked well....but it allowed for a air bubble to form between it and inside the main perc. You could tilt it to get most of the air out...but some was always there.....didn't make it work any worse....just an ocd irritant....lol

So if you have one of these single matrix type units....experiment and see what happens with a 2nd inner downstem.




AIDHRzr.jpg


Here is the a pic of the clearance from downstem to outer top edge of the can. It is hard to find a dropdown that I like with proper shape to fit these wider topped cans. So I just went with a dropdown I like and had it raised up to clear.

I set this up for just less than $50.


And as I have shown before.....a carb hole drilled in the top.......AWESOME SAUCE!

QBCPVdb.jpg
 
Ramahs

Ramahs

Fucking Combustion (mostly) Since February 2017
Hogni said:
@Ramahs That is absolutely great! Construction and look are awesome! Doesn't happen often that I'm falling in love with a glass piece at once. Do you know the price of that? Fear it's unreasonable expensive as nearly all stuff from American glassblowers?
Does he do that on demand?
Click to expand...

I haven't checked the cost yet. I'll be DMing them about one eventually.

Yes, it would be pricey, but maybe someone would find one from our cheaper chinese suppliers. Or, maybe one of them would be interested in making some.
 
Ramahs,
  • Like
Reactions: Hogni
mrbonsai420

mrbonsai420

Accessory Maker
Accessory Maker
cybrguy said:
I have never dabbed, but my understanding is that it cranks up tolerance. How is going back to flower after you have been dabbing for a while? Does it take time to adjust?
Click to expand...


Pretty much switched full time to dabbing. I still vape flowers occasionally, but with the quality and taste of the concentrates out there it's hard to want anything else for me. Tolerance went up a little for me, but I vaped a lot of flower also. If you don't overdo it, it's a beautiful way to medicate.
 
mrbonsai420,
  • Like
Reactions: cybrguy
Summer

Summer

Long Island, NY
@LesPlenty, I found this claisen to be on the thin side. I tapped in rather lightly against the counter & it broke. When I purchase this style claisen again, I'll go with the ones that @Baron23 recommended. To me, a thicker glass is worth the extra expenditure. And the thicker the glass the more sturdy & balanced it will be in supporting vapes.
 
Last edited:
You must log in or register to reply here.
Top Bottom