cybrguy
Putin is a War Criminal
A bunsen burner uses natural gas or LPG, so just like a propane torch it WILL work fine but watch for overheating. I would keep it a little further from the flame.
We all are until we figure it out.
Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
Squiby
Well-Known Member
cybrguy
Putin is a War Criminal
Can I go there and pick it up for you? That is one of my favorite places in the world.I eventually found some Colibri 50 km away in Banff
Chiron
Well-Known Member
Hi cyberguy, how about Lake Louise, where I live?
Could not find it anywhere in Canmore, but there was no way I was going to drive 200 km to get some in Calgary, unless already there for other reasons.
Squiby
Well-Known Member
I purchased my butane from Amazon.ca. I bought a dozen and squirreled them away. They should last a good long time and are good to have around as a prepper stash.eventually found some Colibri 50 km away in Banff
https://www.amazon.ca/Colibri-Butan...pID=51EN23vF-vL&preST=_SY300_QL70_&dpSrc=srch
During the 420 sales, I got in on @Winegums sale. I've been coveting his ABV funnel boxes awhile now and finally got one. Not the Vape Station model but rather the smaller simpler Funnel Box. I just love it. It's the perfect size, perfectly functional and is lovely to behold.
cybrguy
Putin is a War Criminal
Yes, I have been to both and love them both. Lake Louise and Banff are both a piece of heaven.Hi cyberguy, how about Lake Louise, where I live?
Down here admittedly I love Rocky Mountain National Park and my ashes will go somewhere up on Trail Ridge Road, but the Canadian Rockies are even more beautiful.
Uhhh... Back on topic (sorry folks) the good news is next time I get up near Estes I won't have to hide my VapCaps and other Accoutrements and will have no fear of getting tagged. I haven't been back since they went full legal.
Last edited:
longfight92
Member
Even the shirts are comfortable and well made! I tried to get a DynaPolo out of Joe but no luck yet
Modnote: Edited to display image
Modnote: Edited to display image
Last edited by a moderator:
KidFated.
Unknown Member
I seriously need a dynavap flannelEven the shirts are comfortable and well made! I tried to get a DynaPolo out of Joe but no luck yet
https://imgur.com/gallery/iUug2LU
![iUug2LU][img]](/proxy.php?image=http%3A%2F%2F%5Bhttps%3A%2F%2Fimgur.com%2Fgallery%2FiUug2LU%5D%5Bimg%5D&hash=abccce8c185a3a707ba407fb4bef6ebb)
I mentioned the Wood Database in my thread a while back and have had a customer with sensitivity issues with Cocobolo.
They liked and bought a long stem I'd made from it but intended on giving it to someone else.
I suggested they didn't use this stem just in case.
Even though the wood had been wiped over with Iso and was coated in hemp oil and beeswax I still didn't want them to take any chances.
Most problems are with the dust and I wear an air fed mask whenever I'm turning.
Any dust is bad for you just because it's not from a known sensitizer doesn't mean it's okay.
@cybrguy you will be fine outside and as you are only sanding there shouldn't be any worry of splinters.
A thorough wipe round to remove any dust and a coat of wax to seal the surface wouldn't go amiss when your done.
They liked and bought a long stem I'd made from it but intended on giving it to someone else.
I suggested they didn't use this stem just in case.
Even though the wood had been wiped over with Iso and was coated in hemp oil and beeswax I still didn't want them to take any chances.
Most problems are with the dust and I wear an air fed mask whenever I'm turning.
Any dust is bad for you just because it's not from a known sensitizer doesn't mean it's okay.
@cybrguy you will be fine outside and as you are only sanding there shouldn't be any worry of splinters.
A thorough wipe round to remove any dust and a coat of wax to seal the surface wouldn't go amiss when your done.
Whissmu
Well-Known Member
i had a lot of fear
.. honestly!as they say here --> I had my intimate parts of bow tie , but I was lucky and everything went well
, now apart from being lighter I can take more advantage of my compartment
almost there
Well-Known Member
One of the 3 folks I gave the M to is over at my place right now. i was in a generous mood and I thought he has some clue about what’s what....he took my og phattpiggie long stem out and combusted and didn’t say anything. I’m very peeved
on many levels
. Man I’m so . It’s a birthday celebration and I will do my best not to give the birthday boy dirty stares for the rest of the night. I am so......
on many levels
. Man I’m so . It’s a birthday celebration and I will do my best not to give the birthday boy dirty stares for the rest of the night. I am so......
Last edited:
Here's a 14mm barrel stem I turned this afternoon. I decided to take a step away from metal and return to simple wood on wood for a change. Salvaged Mahogany, Cocobolo from George, and Maple Crotch wood that I logged myself. It's a lot faster this way since the complication of having a hard material near a soft one is hell when you're trying to sand it, (maybe not that bad but a lot of extra care is needed).
On another note, does anyone have one of these caps with the wider radius on the digger and shorter wider lettering? I've been using this cap as a photo cap for a long time and just noticed now that it's different than what I'm used to seeing.
All you cap experts can you ID the era of my Cap?
On another note, does anyone have one of these caps with the wider radius on the digger and shorter wider lettering? I've been using this cap as a photo cap for a long time and just noticed now that it's different than what I'm used to seeing.
All you cap experts can you ID the era of my Cap?
Last edited:
Guiltfeeder
Dynavap and disc golf
Beautiful work!! I was actually just wondering the exact same thing about the cap. I just received a ti Blackwood woody S and the cap that came with it is similar to yours pictured and different from the one I received with my Omni direct from DV.Here's a 14mm barrel stem I turned this afternoon. I decided to take a step away from metal and return to simple wood on wood for a change. Salvaged Mahogany, Cocobolo from George, and Maple Crotch wood that I logged myself. It's a lot faster this way since the complication of having a hard material near a soft one is hell when you're trying to sand it, (maybe not that bad but a lot of extra care is needed).
On another note, does anyone have one of these caps with the wider radius on the digger and shorter wider lettering? I've been using this cap as a photo cap for a long time and just noticed now that it's different than what I'm used to seeing.
All you cap experts can you ID the era of my Cap?
I was so excited to show my wife the new toy and the spinning mouthpiece, I must have missed the cool down click when reheating it for her and combusted on my very first session with it. Now I’m trying my best to clean it and get rid of that awful smell.
Lady V
Well-Known Member
This might be old news to many of you but...
I finally had the parts (extra ccd screens and a Ti tip) and time to test a round with a sandwiched hemp fibre and this is just phenomenal. The vapour is so smoooooth, it's unbelievable! And I really enjoy the process of it all!
For anyone that hasn't already seen the post about it and wants to really cool down the vapour without the use of glass check this out.
Edit: It will also be great for the ones that are looking for 100% air restriction of off their Omnis. Well I don't know if it is 100%, but this and the omni set to completely closed will give the mouth-pullers what they're looking for.
I finally had the parts (extra ccd screens and a Ti tip) and time to test a round with a sandwiched hemp fibre and this is just phenomenal. The vapour is so smoooooth, it's unbelievable! And I really enjoy the process of it all!
For anyone that hasn't already seen the post about it and wants to really cool down the vapour without the use of glass check this out.
Edit: It will also be great for the ones that are looking for 100% air restriction of off their Omnis. Well I don't know if it is 100%, but this and the omni set to completely closed will give the mouth-pullers what they're looking for.
Last edited:
GRZ
Well-Known Member
No, but it seems like my new 18M stem is running hotter (retaining more heat) than my 17M stem with the same heating source. Isn't it the same medical grade SS?
cybrguy
Putin is a War Criminal
The most recent caps I have gotten, including the 420 cap, have the D in Dynavap snugged right up to the crimp. What I can't tell you, however, is if the laser gets set up each time a run is implemented or if you just load a finished piece of software where everything is already calibrated.
One of these days I'm gonna get up there and have a look, if the boys and girls don't mind me lookin over their shoulder. They're only about 150 miles away by car.
Not too soon, tho, cause George be a travelin man...
Apogee
Active Member
So, I wish there was a way to quantify this but it will be interesting anecdotally to see how much better the QC may be on the later shipped product. I would expect after the complaints started that procedures would change at least a little. We KNOW they listen to us, and this would provide a good example of that.
It is all a matter of deciding where compromise should be applied to best effect. My money is on George figuring that out.
I am encouraged now that the 420 shipment are working their way into the hands of users that QC reports are not popping up and so perhaps the experience i had with my orders, made prior to 420 was the outlier not the norm. Having the tools I was able to hone and polish the rough edges and tighten up the sloppy caps of the items that came my way.
There were requests for pictures. I found the pinch required to get an interference fit producing an extreme oval was unacceptable. Photos show how I achieved a fit similar to the rest of the caps in my collection.
Complete fail posting pic. will try again later.
Fail on posting pictures. I will try again later.
Last edited: