The Mighty/Mighty+ by Storz & Bickel

Why you guys pressing buttons to stall the auto off. Puff puff pass or If alone just keep on puffing. And we'l said about concentrates. A grain of salt goes along way in the middle of the good stuff.

Ever wondered why S&B placed a less fine screen on the CU? I did just now. Opinions? i think it has to do with air resistance (high thoughts..)

I do it right handed like Winegums and Vapviking and swap it around for a stealth mode.
I was told years ago that more German people were left handed and I thought this is why the Mighty was designed like this!
It could be just co-incidence or because they really have thought of everybody!
I noticed the Crafty does not have, nor really need the choice although I think the CU can be placed the wrong way.

Like others I also notice the new cooling units click on much more solid now. I don't even want to try my old CU on the new Mighty!
My new Mighty also did smell like soap at first I don't know what that was about.
I'm also sticking to capsules only ATM, as my bowls are too shiny to fill up direct! And I still might bring this thing on holiday.

I was tempted today to fill the bowl for some pain management duty and maybe even better tastes but a full capsule more than impressed me for the job. It connects directly to pain sometimes it's amazing how that works!
So fucking convenient with capsules and a caddy holy crap, the only thing I normally need to decide is if I want full capsules or two thirds full with small pad inside on top.
I agree I would love to buy pre-filled caps in a store in the future!

It's interesting to see how others here are using this unit and the differing temp. they start on, and great to see more good reports from new buyers.

Speaking of power buttons my new one is more muted or less click-ey, it can make double presses a challenge to get right, hard to say if this is intended, or if it's to make it more durable than older ones.

fuby said:

Ever wondered why S&B placed a less fine screen on the CU? I did just now. Opinions? i think it has to do with air resistance (high thoughts..)

Click to expand...

I think the fine one is on the bottom to stop particles falling down, I sometimes found too high an air resistance with a fine screen also in the CU, maybe that's why they went for larger holes up there?

fuby said:

Ever wondered why S&B placed a less fine screen on the CU? I did just now. Opinions? i think it has to do with air resistance (high thoughts..)

Click to expand...

Every Mighty that I've purchased for friends I have removed the course screen from the CU and replaced it with the fine one before giving it to them. I don't notice any difference in draw restriction and the reclaim in the CU comes out nice and clean, not riddled with scooby snacks.

Stu said:

Every Mighty that I've purchased for friends I have removed the course screen from the CU and replaced it with the fine one before giving it to them. I don't notice any difference in draw restriction and the reclaim in the CU comes out nice and clean, not riddled with scooby snacks.

Click to expand...

...............................................................................
The stock Mighty CU screen reminds me of a Moto Guzzi Lemans I had with carb stacks and a screens designed to keep birds from being sucked into the carbs Not much filtering done by either .

FYI, I also think the dosing capsule holes are too big so place a fine mesh screen that I cut into the bottom and the top of the capsule. In a couple capsules lids I actually have a fine mesh screen AND a tiny tiny thin hemp filter above the screen which really keeps the micro ABV dust in its place

Bomb33 said:

Why you guys pressing buttons to stall the auto off. Puff puff pass or If alone just keep on puffing.

Click to expand...

Sometimes I'd prefer to just let time stand still and not puff it if I don't care to, especially after a few tasty hits...
But I do want Mighty ready when I'm ready to resume.
Sometimes, even with the wife, we both feel the same and don't care to keep passing; we both have a lot of patience.
There's many ways to ride the waves.

Mighty is splitting at top. Should I be concerned about affecting performance? Bout it used and it’s older jsybwant to make sure it will be ok to use after a while.

kaisersosay415 said:

Mighty is splitting at top. Should I be concerned about affecting performance? Bout it used and it’s older jsybwant to make sure it will be ok to use after a while.

Click to expand...

I have a zap strap around mine because it has the same issue.

It should be fine as long as you keep it tight with what's suggested above or I bought military grade elastics that also work wonders as I have the same issue. Curious to see what s&b would do and for how much as I got a new one recently and its quite impressive to the old one I had. The cu snaps on like crazy. Can't wait to get my old unit updated. But how much it cost?

Damm thats my number one fear with the easyflow and i hear cracks when its cooling i am sure thats expanding plastic? And i had thought about cable ties but military grade elastic?

Ok but what about heat sock too? You know like the cloud evo? In a cold time of year that helps the battery too. Can i ask for a pointer on materials? I wish i had money for 1000 from china to be honest and sell on ebay.

But i cant knit a prototype for the holes and dont know the material.

Don' t cover the mighty. I can't find where I gòt the elastics but I searched and found thrillist.com that's the idea. Hope that points you in the right direction

I put it in a cup of 91% ISO and let it sit for 2 hours. Put it under HOT tap water on HIGH. Blast the contents until the cup runs clear. Take out your pieces most of the gunk should be gone. Scrape any leftover residue and run a pipe cleaner through the straw. Replace bands. Just like new.

My Crafty died after 100 hrs. I sent it in for RMA and S&B let me upgrade to a Mighty for 50 Euro. Well pleased.

Lately I've been reading that you shouldn't do a burn off with the CU removed. Where did this originate? I do burnoff's with and without the CU, and don't see it struggling to keep temp at all. It hovers around the temp the same way as when the CU is on. Just my 2c

Vaporcussion said:

Lately I've been reading that you shouldn't do a burn off with the CU removed. Where did this originate? I do burnoff's with and without the CU, and don't see it struggling to keep temp at all. It hovers around the temp the same way as when the CU is on. Just my 2c

Click to expand...

Same, i do have these (light) scratches inside my chamber. No idea where they came from. Only used the liquid pad one or twice so i doubt its from the pad. Might have to do something with a fast temp change. No idea.

Did send it to S&B to let it get checked. They said its completely fine. Cleaned my unit and i got some fee stuff!

QUESTION: Anyone uses hemp fiber as a (extra) filter? I just read about it in another topic.

Guys, doesn’t it annoy you that the max temperature is 210C? Maybe they should raise it to 220, 230?

There are some cannabidiols missing with only 210C. I’d love that almost black, fully extracted product. Damn, FlowerPot can hit like 420C. I know, it’s a desktop, more powerful and maybe a portable couldn’t handle a 420C temp (or maybe it can, since you can combust with the Milaana), but still, it could be at least 220C.

I’ve read you guys saying you get full extraction at 210C, but how come, If some cannabidiols are released only at 220C or even further? It’s physically impossible.

But what the interest of the boost mode, I'm happy to automatize the upping of temp but when it get down obviously there is no vapor.

And amazingly vaping at 173C when I use the liquid pad on top produce loads of clouds with good savor

alex91 said:

Guys, doesn’t it annoy you that the max temperature is 210C? Maybe they should raise it to 220, 230?

There are some cannabidiols missing with only 210C. I’d love that almost black, fully extracted product. Damn, FlowerPot can hit like 420C. I know, it’s a desktop, more powerful and maybe a portable couldn’t handle a 420C temp (or maybe it can, since you can combust with the Milaana), but still, it could be at least 220C.

I’ve read you guys saying you get full extraction at 210C, but how come, If some cannabidiols are released only at 220C or even further? It’s physically impossible.

Click to expand...

Well, I've taken ABV from the Mighty, put it in a log vape (that goes hot enough, easily, to combust) and found zero visible vapor left in the product. My experience with both of my Mightys is they extract fully.

So it's not impossible. Maybe it says 210 on the display but it's actually a little hotter in practice? I have no idea. But I'd be shocked to hear from a Mighty user that they extracted any substantive vapor from their Mighty ABV if they'd been hitting it at 210 for several pulls. My experience with the Mighty is that when it's done with weed, so am I.

alex91 said:

Guys, doesn’t it annoy you that the max temperature is 210C? Maybe they should raise it to 220, 230?

There are some cannabidiols missing with only 210C. I’d love that almost black, fully extracted product. Damn, FlowerPot can hit like 420C. I know, it’s a desktop, more powerful and maybe a portable couldn’t handle a 420C temp (or maybe it can, since you can combust with the Milaana), but still, it could be at least 220C.

I’ve read you guys saying you get full extraction at 210C, but how come, If some cannabidiols are released only at 220C or even further? It’s physically impossible.

Click to expand...

I felt like you at first but after some time of use i rarely go over 200C even though at first i was always hitting the 210C and hoped for having more, this was more a smoking craving, but still that would be good to have this opportunity but i think ill have a lot more go to 240 and have much more nasty chemical, so it a bad for a good ill say

mitchgo61 said:

Well, I've taken ABV from the Mighty, put it in a log vape (that goes hot enough, easily, to combust) and found zero visible vapor left in the product. My experience with both of my Mightys is they extract fully.

Click to expand...

This ^^

I have taken to putting a Liquid Pad on top of my Mighty loads. This allows me to use smaller load sizes if I wish, keeps crumbs out of the CU, and I get very evenly browned AVB due to the added conduction on top of the load.

BUT, I'm convinced that all I am doing by going from normal S&B AVB color (I've heard it called Volcano poo haha) and the brown of my LP topped AVB is boiling off any remaining chlorophyll as there just doesn't seem to be any good stuff left.

I'm still a big Mighty fan. Yes, I would love for them to get off of their asses and do some updates/new releases....but the Mighty is still king of portables in my universe right now.

Im on my second mighty and already going for third because of the housing, where the cu mounts broke again. I was thinking abou milaana, when I want to use the mighty I really want to leave it to preheat itself, does this needs to be done with milaana, is there any other vape with exchangeable battery that can compare to mighty? thx

simplywonderful said:

already going for third because of the housing, where the cu mounts broke

Click to expand...

Good thing you paid less than $100 for it, oh hang on that's the Vivant Alternate.
Too bad the new Tera had so much trouble, it may have got S&B R&D guys to get off their lazy arses and do a proper update of the Mighty, how about a nice aluminium housing to set you apart from all the plastic stuff getting around, too late, even a cheap ass Starry has a metal body and user replaceable batteries.

do you use bubller for this to happen or it a common failure on the mightys?

whats this mean? lol

MGG said:

whats this mean? lol

Click to expand...

You win the lung capacity award for deepest draw!