Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

just_the_flu

they say im crazy but i have a good time
Do you have or have you used the vapcaps just the flu? I have been using them for awhile and think they are awesome. I use mine all the time and I'm not comparing to the newvape.


...with the fear of thread derailment i'm going to answer this and stfu... yes i have used them before, actually got one for my fishing tacklebox.. they dont suit my needs, im too much of a glutton.. i felt they are best for microdosers (which i am opposite), a cigar sized one may be better suited imo...
 

invertedisdead

PHASE3
Manufacturer
HigChqr.jpg


@graydeh1 pic of my travel kit. I like this handle cause it's soft and puffy and easy to grab.
 

Alex3oe

Accessory Maker
Wondering if anyone macgyver'd something for an enail handle instead of the one they sell, I will order some accessories asap bit my unit will arrive without a stand and enail handle. Any tips? ie: is coffee mug ok for a stand temporarily?

Let me inspire by the original NewVape handle, which seems quite expensive in my eyes. So I wrapped a thin hemp rope around the handle of my Auber coil :)
 

Baron23

Well-Known Member
This thread has some sketchy vibes for me. I just spent over $450 on my flowerpot setup and I see a lot of the same people posting here throughout this entire thread. It screams fake marketing. I feel like people in this thread are affiliated with newvape and not being honest about it. (WHICH is a crime)

Modnote: No public accusations of shilling allowed. Please re-read the forum rules.
hehehehe....then you must not have read the whole thread....cause you seemed to overlook the 'usual suspects" in a bit of a flame war with Edwyn some time back. LOL

No....no shills here, my friend. haha

@gunmetalshark do you have EHLE part numbers for each piece?
Would this be them?

https://www.t-ehle.de/en/dabbing/oil-rigs/The-VapoRig.html

And drop down

https://www.t-ehle.de/en/dabbing/adapter/drop-down-with-hollow-chamber.html

Ooops, looking for the ash catcher and not the drop down. Sorry, couldn't find that on their site.
 
Last edited:

Justpassedu

Well-Known Member

btka

Well-Known Member
I want to buy a flowerPot Stand & Debowler I saw vapefiend is also selling the old stand (https://vapefiend.co.uk/collections/flowerpot-parts/products/flowerpot-stand-debowler-3004) and debowler it is 12 euros cheaper... which one should I buy... I only need head post, deblowing spike and holes for 3 dabbing tools...
is the older stand and debowler as secure as the new one (not easy tipping over, because the new one seems to be sturdier and heavier https://vapefiend.co.uk/collections/flowerpot-parts/products/flowerpot-stand-debowler-2-0-3004-2-0)...
 

graydeh1

REP for TRVP ATTY, Shellshock/Tectonic and more.
Company Rep
I want to buy a flowerPot Stand & Debowler I saw vapefiend is also selling the old stand (https://vapefiend.co.uk/collections/flowerpot-parts/products/flowerpot-stand-debowler-3004) and debowler it is 12 euros cheaper... which one should I buy... I only need head post, deblowing spike and holes for 3 dabbing tools...
is the older stand and debowler as secure as the new one (not easy tipping over, because the new one seems to be sturdier and heavier https://vapefiend.co.uk/collections/flowerpot-parts/products/flowerpot-stand-debowler-2-0-3004-2-0)...

Does anyone know any other retailers who carry newvape stuff? (especially canadian)
 
graydeh1,

gunmetalshark

Glass Addict
I want to buy a flowerPot Stand & Debowler I saw vapefiend is also selling the old stand (https://vapefiend.co.uk/collections/flowerpot-parts/products/flowerpot-stand-debowler-3004) and debowler it is 12 euros cheaper... which one should I buy... I only need head post, deblowing spike and holes for 3 dabbing tools...
is the older stand and debowler as secure as the new one (not easy tipping over, because the new one seems to be sturdier and heavier https://vapefiend.co.uk/collections/flowerpot-parts/products/flowerpot-stand-debowler-2-0-3004-2-0)...

I did not try or see the new one yet in RL but i can tell you that there is no way that the (old) one will or can tip over :)
 

graydeh1

REP for TRVP ATTY, Shellshock/Tectonic and more.
Company Rep
I'll try to talk PlanetVape.ca into grabbing some of their stuff.

@PlanetVape

Hi Planetvape, I bought most of my Vapes there.
You guys should contact newvape.com and see about getting some of their stuff, I'm sure a lot of people here would buy from you as they don't have international shipping down to a science yet ;)
 
Last edited:

graydeh1

REP for TRVP ATTY, Shellshock/Tectonic and more.
Company Rep
Exactly! Theres still some accessories I want to buy and a showerhead as I went with a wrap around w/ sic.
 

exony

Well-Known Member
Sorry for worrying about shills in here, didn't mean to personally offend anyone. I was just honestly surprised to see people so CONSISTENTLY positive about the product and the company and was worried I was just tricked in purchasing expensive vape for nothing. Well see how hard it actually hits when it gets here. Thanks everyone for being so chill.
 

ParanoidAndroid998

Well-Known Member
Wooden dowel rod, even a #2 pencil would probably work for support. Wrap it with a shoelace or paracord. If you search this thread for "shoelace" or "paracord" you should see the dialogue between me and @WAM90 that shows my handle and then the one he made.

The only reason I took it off is I sometimes use my 20mm barrel coil to heat Quartz bangers and the added weight was tipping my micro dab rig over.
@graydeh1
I made a new one.. 4 chopsticks super glued together around the metal joint, and then wrapped with two shoelaces. Much prefer the look and feel of this one over my first attempt!

21SIz3O.jpg

Wq78beg.jpg
 

graydeh1

REP for TRVP ATTY, Shellshock/Tectonic and more.
Company Rep
Wondering if people tend to put dry flower or fresh flower in their (cured of course)
For most of my Vapes up to this point I do dry as hell and a very fine grind to get the clouds I need!

Thinking with this things might change a little I'm sick of smoking dry weed ;)
 

psychonaut

Company Rep
Company Rep
Where I live you either have dry bud or you use humidity packs, and a lot of people dont use humidity packs. I have a dual purpose for my buds so they are kept at 62% RH, and for me I dont find any reason to dry my nugs out before grinding and vaping. I am also a bit more sensitive to flower vapor in a power vaporizer like the FP because of it's extraction ability. It's tempting to go up high in temperatures for those huge rips but for me there is a limited exposure for that.
 

graydeh1

REP for TRVP ATTY, Shellshock/Tectonic and more.
Company Rep
I'm going to have some fresh fc gsc bud in around the time my FP arrives.

And I have some Sour Tangie here for a couple of weeks so I'm going to add a pack to it.
I will try things out first with finely ground fresh bud.
 

Vaporware

Well-Known Member
I'm going to have some fresh fc gsc bud in around the time my FP arrives.

And I have some Sour Tangie here for a couple of weeks so I'm going to add a pack to it.
I will try things out first with finely ground fresh bud.

Try both if you’re not sure, but I got some fresh stuff on 4/20 and I enjoyed it more than some of the older drier stuff I had around. I’m planning to add a bit of humidity back into that.
 
Top Bottom