• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

vapen00b

Many vapes & accessories. Always happy to help
@frosty234 I had to search a while but was able to find a one piece small affordable bubbler with male 18mm adapter. Tubo just on top and no additional parts.
x2cQL

https://imgur.com/a/x2cQL

Is not available at the moment where I got it but those things exist :D

Be sure to get an additional adapter or claisen to carb/clear or it will get messy: blowback alert! I don’t use caps or top hats, which would help avoiding it also.
 

Evilevile

Well-Known Member
Is this 'device too hot' message a real problem with the Tubo? That would piss me off, honestly. Will a future firmware update be able to fix or override this issue?
 
Evilevile,

NizzyJones

Well-Known Member
I've yet to see it but I've been using it alone, and cruising a bowl myself is more than I would usually use at once anyway (but naturally I've had to try it a couple times for science :science:). You can also see Troy (420vapezone) pushing it pretty hard in his youtube review without encountering it.

I now have Eco turned on now but I didn't for my first couple Cruise sessions and even Warmup2Cruise and trying to kill a bowl fast didn't trigger device too hot.
 

muunch

hotboxing the cockpit
I think it's something that varies from device to device (chip to chip?) based on how your coil is wound/tuned? Also probably tons of other stuff (ambient temp/device temp/etc) since I do think it's actually preventing the thing from overheating when it does that...

I used to get it ONLY when running back to back bowls (so it was obviously pretty hot) on my single. I have not gotten it on my dual but I haven'tt pushed my dual the same way really. I just use my portables differently since getting my FP
 

BaroneBarra

Well-Known Member
I'm trying to update my Tubo to the new firmware but the link for downloading the file tubo-joyetechupdater.zip on lamart.ch is dead...
First time I'm doing this so not sure how to proceed.
Cheers
 

BaroneBarra

Well-Known Member

If I understand correctly, that's the firmware file.
What I can't download (this is the dead link) is the uploader, i.e. the program to use for uploading the firmware on the Tubo.

EDIT: used the official updater (found it here) and it worked.
Like some other users reported, my laptop wasn't able to recognize the Tubo so I had to enter recovery mode (take the battery out and keep "+" pressed while connecting the USB cable to the PC - thanks @Abysmal Vapor for this) and then everything worked.

Already flying high ;)

Cheers everyone!
 
Last edited:

leveltree

never wanted to beat that one ;)
Device too hot comes along when pushing the tubo with max demand, i.e. Nearly every inhale and high temp without eco mode.
In my experience you can easily avoid that. Just chill a bit and use eco mode to save battery also.
So it's really seems to be a symptom of much stress to the device.
If you tend to rip the shit out of vapes it could occur^^
Also I have a single battery one, haven't heard it occurring with double yet.


Don't know if there is a connection with coil resistance but mine is from a batch with rather low resistance (.164).
Maybe other users who had the message could post their resistance values for comparison :)
 

JibbsIsMe

Well-Known Member
Hey all!

I'm thinking the Tubo Evic will be my next (and hopefully last) portable vape. What sorts of accessories would you guys recommend adding to my order? I'm waiting for the 4/20 sale, so I still have a few days to figure everything out!

Also, I've read about a Tubo Evic Dual, but I don't see it on the website. Is it for sale at all? And is there any chance of the wood stem being available during the 4/20 sale?
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Is this 'device too hot' message a real problem with the Tubo? That would piss me off, honestly. Will a future firmware update be able to fix or override this issue?

FYI, I've still never gotten the device too hot error and I've had mine almost a year.

Ditto^ Have one from the first batch way back when andanever seen it even with long cruises at high temps and loose ELBs. Nothing to be concerned about at all with any Tubo imo

Where are people getting wood stems?

@Alan can be contacted via email to order some
 

funkyjunky

www.lamart.ch
Manufacturer
@funkyjunky , if I download the latest firmware, would I be caught up to date. Or are there a series of downloads to utilize cruise and other benefits. Thanks
the latest firmware will always contain everything that was great from the older ones. only need to update with the latest firmware file.

Hey, @funkyjunky, thanks for the update. My Dual is working as it should now. Good job! :tup:
thanks for reporting. i was hoping your issue would get fixed with the update.

My first vape will be a tubo! Can't wait until the sale! Will people signed up on your shop site receive notifications when it's live? Cheers!
uhm, yeah, i can try out the newsletter function from the shop. havent done so yet, hehe.
the sale will be 10% sitewide from wednesday 18th to sunday 22nd of april. running low on tubos but will add more slots to the building queue. it will likely result in longer building time.

The tubo is doing me great services for just 3/4 year now and I hope that'll continue for years. Any body remember when the tubo was released / first unit been shipped?
thats very great to hear!
@stickstones received his unit around January the 8th 2017.

yeah we totally missed one year tubo aniversary! :party: buncha stoners:dog:

@funkyjunky will the new wood stems with the S&B capsules be available for the 4/20 sale???
Please say yes, I have money to throw your way! Take it!

:2c::2c::2c::2c:

:nod:
they will likely not be ready. however i will start selling them during the sale for maximum profit, lol. man next week is approaching fast! lots of stuff to do.:buzz::buzz:





i replaced the logo file within the updater archives. i think they work now, at least they did here. please try again whoever had problems.

also please have a look at this :cool::
0fQsQ4z.png

art by the whip master


have a great temp stepping!


edit: updated the manual slightly as well
manual.png
 
Last edited:

Abysmal Vapor

Supersniffer 2000 - robot fart detection device
0fQsQ4z.png

What a stunner. I have the same stem/nectar collector tip and use it with the whip :). ! I like it better than the mushroom shaped ones. Easier to clean. I even order 2 custom ones (11 and 13 cm) from China. Wanna try them for direct draw . :p
They remind me very much of the classic hookah mouthpieces . It probably would be very cool to have on the other end of the whip.
NammorTip-Glass-All-L.jpg
 
Last edited:

RelaxedNow

Well-Known Member
thanks for reporting. i was hoping your issue would get fixed with the update.

@funkyjunky, the update fixed the changing resistance, and it stopped switching to Power mode. However, it’s intermittently failing to heat, even though everything looks normal (I think) on the screen. Actually, it was doing this before the latest firmware update, but I was attributing it to the Resistance or Power errors.

Thankfully, my original Tubo is working properly, so I’m doing fine. I do look forward to a fix on the Dual though, so please let me know if there’s anything I can do to troubleshoot or correct it. :peace:
 

bossman

Gentleman Of Leisure
@funkyjunky, isn't there a Tubo 4/20 sale? I keep checking back but the site is pretty minimal and it'd be good to just know when it starts and put it on my calendar. Thanks!
 
bossman,
  • Like
Reactions: NHCheef

Alexis

Well-Known Member
Hello to you all. I rarely ask for advice here, but I would really like some help from you please.
I have very drawn to the Tubo since the start. Except it was a little confusing and intimidating to me at first.
My plan is to get a decent battery powered portable as soon as I can decide on a model, for this summer I hope.
My only portable now is the Omnivap. But I have totally given up using the vapcap dry. It is always too harsh and irritating to me, especially in my throat. I only use it at home now with bubblers.

I also don't like trying to torch in wind. So I need a good portable. I REALLY REALLY like the look of the Tubo. Vapor quality and potency are always the most important to me.
Smoothness as well though. From my (studies:party:) it seems that the Tubo offers better quality vapor and potency than a lot of other current popular and emerging portables (Haze Square included(?)).

I simply have no wish to purchase another model which may be more suitable/practical/convenient on numerous grounds (portability amongst others), at the expense of a drop in vapor quality and potency.

For example- the Fury 2 looks perfect for on the go, discreet public use (on way to shops etc).
But I don't believe it offers the same quality and potent vapor. Also I dont want a session vape. I need on demand. I get that the Tubo can do both, and in between that too.

If the Fury 2 or Fierce was on demand, I may be swayed towards them a little more.
I like the look of the Haze Square, but I have a known severe allergy to the aluminium heating block of the Supreme 3. The Square may be okay. Im stil a bit fuzzy on exactly where all the aluminium is, I dont think it is heated except the herb pods which are also available in SS.

So it may be fine. But Im also not keen on the black anodized coating on the pods. Just an unknown to me and being so hyper-reactive I have to be mindful of this.
But I actually just prefer the look of the Tubo all round anyway.

Im still looking at the other options. I'm not keen on the Milaana. I need regulated. Poor brain function makes me prone to combustion with torch/unregulated vapes. I can never get consistent results for long due to variatons on my condition.

The Splinter looks like the closest rival. More portable, discreet. Maybe less powerful though?
I also would use the Tubo at home a lot, with and without water. I love the fact that it can rival desktops with power and extraction/hit size.

I also love the open airflow. A big thing for me. Can't stand the vapcap draw restriction personally.
So I don't want a vape that is more portable but not as great as a free flowing, hard hitting desktop capable of milking big hits with powerful and fast extraction. Like the Splinter for example- may be harder work to get the same home experience through a bubbler, taking longer sessions, more suction power etc (the Splinter looks more restricted than the Tubo)....

...for the sake of a more convenient road vape. But I may make this trade off if I feel it is best overall.

Now, only 2 things really hold me back. I do really want the Tubo:
Portablity for away from home use- I would like to be able to hit the Tubo while taking leisurely walks out and about. We dont see many police here. They are undernumbered and Im not too worried about them seeing me slying a vape and actually going out of their way, unless it is right in their faces of course.

I do feel that I could get away with discreetly hitting the Tubo when out walking, just not in town centre etc. Size wise, form factor it looks okay to me. I usually always have a bag out, or big coat pockets. And the fact that it IS effectively like an ecig device is a big plus for public use.

Open to any thoughts on this.
Now, the bottom line. Vapor smoothness/harshness. I have seen some conflictinf reports here on the Tubo. Most agree that the Tubo vapor is slightly harsher than the Milaana, but be due to the hit/denseness or just the steady constant set temp, vs a temp rise (Milaana).

@little maggie hiya girl, I saw you say how you can't really use the vapcaps now due to their harshness, and you speak highly of the Tubo. So if I can't be comfortable with the vapcap dry, how do you think I would fare with the Tubo?
A big part of the vapcap is the randomness of the temps, hit to hit. Also the same hit- always high heat at start. This is an issue for me.
I could always use a lower temp with Tubo when hitting dry? I also would only use the long bent stem, wpa, and whip.

So I am most drawn to this vape than the others. I really want to actually USE the Tubo, purely for the vapor quality, effects and overall experience. I dont feel like that about the others.
It could be more portable/discreet but not a deal breaker IF... I can feel confident that I would be comfortable enough with the smoothness etc to use regularly as a portable without suffering the throat and respiratory aggravation of the dry vapcap (vapcap is also quite irrtitating to me even through water- I use it every day but it certainly is not the cleanest/gentlest vapor to me at all and causes a particular type of irritation).


Any thoughts much appreciated folks. Sorry to go on. I wish I had a bit more time until 4/20. I am exploring the idea of getting involved while the sale is on possibly.

One other thing- the manufacturer! I think @funkyjunky seems like a really great guy, very friendly, helpful, obiliging, mature, respectful and still totally professional.
I have lots of love for so many vape manufacturers who are commonly truly great people.
Not always the case. One of the other portables I have looked at-I just feel that the manufacturer can get a little impatient and patronizing at times, and it can be tricky to get the info you need on the vape. I feel like I better not ask again on what, IMO they didn't explain clearly enough for me to understand. And I feel like t would annoy or offend them if I asked again, especially if it is about materials where they can misread an innocent non trouble stirring inquiry as an attack or fearmongering.

I dont get this feeling at all with @funkyjunky who seems very approacable and understanding. I also dont see any concern for my own extreme sensitivitues with the Tubo, so no inquires from me on that one!

Okay nuff said. Thanks everyone take care now.:):tup:
 
Top Bottom