Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer

Ville23

Well-Known Member
Didn't even know I had VAS till I read through most of this thread and now there's no turning back :doh:
I may need to pull the trigger on this soon...Hoping for a nice 420 deal!
I'm looking to get the starter kit https://www.newvape.com/flowerpot-w-showerhead-starter-kit
When I add the 18mm SH is makes the kit $400 but if you buy everything separate, it's $395?
So what else is included in the kit? Am I missing something?
Just trying to figure out if it's even worth buying it all together if the kit actually costs more?
 
Ville23,

Zow237

Well-Known Member
From my own experiences and everything I can sense with my intuition regarding my body and symptoms- with vaporizers in general, what you say about adjusting variables to affect the outcome does indeed apply and makes a noticeable difference.

At the top of the list is the actual temperature- this makes the biggest difference of all. Being extremely sensitive, I tend to find that there is a precise max temp I can use with most vapes in order to keep my symptoms within a comfortably manageable range, for example with my XL Herborizer I would never go above setting 7 except a tiny smidge perhaps.

This is allegedly 200 degrees C. Even setting 7.5 which is still very moderate in practice for most people and certainly within normal temperature ranges used across the board with different devices, would be a bit too aggravating to my respiratory system and would make all the difference in how easy it was for me to effectively manage my symptoms and stay on top from day to day.

So temperature is the biggest factor for me but obviously load size and the size of the hit plus the type of water tool used and your actual material are all very relevant as well, and can never be isolated.

However with certain other vaporizers which I am extremely intolerant to for unknown reasons, the Flowerpot included and especially- it is as if none of the usual variables apply or make any difference however tweaked. This is not exactly true in that if I hit the flowerpot at 700 to 800 then it would cause even more bother.
But however low I go in temperature, whatever load size and hit size, water tool etc, I don't notice any improvements or reduction in the severity of the reaction I experience.

Nothing seems to make a difference even if I'm barely inhaling any visible vapor at all it is as if the reaction is just to the nature of the vapor produced by this device itself, regardless of the materials which I know for a fact is not what I'm reacting to because I do not have this reaction to the Herborizer Ti.

I just don't see us really understanding why some of us are having such difficulty tolerating specific models for quite some time. There is so much more to this than we have any knowledge or idea of at present.

I would still argue that in @Zow237 's case it may not be the Ti even which is the issue. I handle the Herbo Ti and Vapcaps well, im 100% sure Im not reacting to any specific material with those vapes.

I dont handle the FP at all. I dont handle the Glass Symphony at all either. The strange but unbearable adverse reaction is on par with the FP.
But I handle the Elev8r very well. I still suffer an allergy type reaction to all vapes, but with the Herbo and Elev8r, it is just the standard reaction to weed and vaping- it can vary but always directly in line with, and responsive to the typical variables which you refer to.

Like lowering heat slightly, smaller hits etc. I hope I have expressed this view clearly. I just know this is more complex than we might think that is all, and certainly not disagreeing with anybody.

Agreed. So many damn variables. So much experimentation to be done ha. I think when I say something it comes off as the holy grail. I just have a poor way of expressing myself most of the time without saying that I know there is always more variables. I just know that any temp seems to be to harsh for me and causes whatever reactions I have. I seem to handle my brick maxx pretty well though
 

Justpassedu

Well-Known Member
I think it was @Chicken #420 who linked a glycerine WT adapter that you can store in the freezer.

illadelph-glass-freezable-coil-ash-catcher-black-with-gold-label-water-pipe-ash-catcher-18.8mm-14.4mm-glass-smoking-pipes-tobacco.jpg


https://www.dhgate.com/product/illa...catcher/406898985.html#s1-1-1b;srp|2095980456

I'm sure it condenses a lot of reclaim when using it but that would surely turn any hot vapor into cool vapor. I'm just trying to help because I don't understand either, why some of you guys/gals are intolerant to the vapor. I hack up always but I have had respiratory issues in the past so I know why I have issues, and I think I understand why others don't. For instance, if I get a chest cold, I am typically the one in the house that suffers the worst symptoms despite us all getting better at the same time.
That was me, I happen to enjoy it allot and it definitely helps cool but I always forget I own it as it is always in the freezer lol .
 

muunch

hotboxing the cockpit
I'm not quite sure I am there yet, but the FlowerPot ShowerHead combo has all but killed my VAS...

Sometimes it's no fun comparing the effects I get from the SH to my other vaporizers.

If I start a day hitting the SH I pretty much ruin all other chances of getting high besides hitting the SH again or taking a dab for like 4 hours... Kinda fucked. I am just realizing this now... I really need to not wake and bake with this thing.

Anyway, tomorrow is new WP day I think *fingers crossed*
 

Vaporware

Well-Known Member
Didn't even know I had VAS till I read through most of this thread and now there's no turning back :doh:
I may need to pull the trigger on this soon...Hoping for a nice 420 deal!
I'm looking to get the starter kit https://www.newvape.com/flowerpot-w-showerhead-starter-kit
When I add the 18mm SH is makes the kit $400 but if you buy everything separate, it's $395?
So what else is included in the kit? Am I missing something?
Just trying to figure out if it's even worth buying it all together if the kit actually costs more?

When I bought mine during the Black Friday sale I believe it was 20% off. Before I ordered I added up the prices of the individual parts and (once I included everything) it came out to the same price as the kit. The kits were just made for convenience.

If you add it all up again and still think it’s off maybe let NewVape know since I doubt that would be intentional, but feel free to order individual parts instead, there’s no downside unless you forget something.

Even if you get the kit though, I’d recommend getting a few extra screens (consider double weave if you get a panhead or shovelhead bowl) and maybe a scoop if you don’t have a good one. A second bowl (Titanium or glass) is not a bad idea either!
 

metaknight

I dab. A lot.
Something weird happened to me last night, I put some oil in the top for a dab and it boiled over and hit me in the nose! Luckily I didn't get a burn from it but it sure did sting! :argh:
 
metaknight,

snamuh

ghost
I would strongly recommend the fp showerhead... the e-nano (log-vape) was for a long time my daily driver... then I got a grasshopper which I liked and which replaced the e-nano for me (only problem was I used more herb then usual because I felt the need to fill up the gh bowl to get nice clouds (it was a herb hog)... nowadays I strictly use my fp showerhead with a bubbler and for microdosing purpses I use a arizer eq basket... I load roughly 0.02 to 0.07g in the bowl at once and get a big fat cloud (at 777F) which is tasting very good... clouds are bigger then hopper and e-nano.... the fp showerhead is very versatile you can microdose or macrodose as you wish and the sh performs... it is my best vape... grasshoppers are collecting dust...

BTW regarding (EHLE) glassbowl maybe we can make a fc bulk order at ehle? who would be interessted?



I am a micro macro doser. Can you instruct me how to use an eq screen as well as link to the screen to buy? Also I'm debating on whether to get the shower head or the multi dish... have you used both?

I'm looking into getting a fp setup but just some parts. Not the kit.

Will aubers 20mm work with the fp?
https://www.auberins.com/index.php?main_page=product_info&cPath=45&products_id=623
It looks like it has less coils than the NV one...

So far my plan is to buy the auber 300, auber flat and 20mm coil. And then one of the flower pots, and the regular newvape quarts enail for CBD only.

Ugh I hate decisions. Shower head vs quartz...

In not of a fan of ti dabbing because mine always got dirty. With quartz I just torch it off. I like cleanliness and am afraid the showerhead won't be as efficient or clean to use with CBD. On the other hand I will also have a CBD only quarts nail to use...

Any tips or info from anyone would be appreciated. Brand new to emails and somewhat new to dabbing.
 
Last edited:
snamuh,

Saulsaul

Member
Hello fc's

My friend tried to change from fernheit to celsius and he got lost and lost the original settings
Its pretty sad that he cant vape because of it

And now He wants the standard settings


Pls help him
 

Alexis

Well-Known Member
Is that bowl available anywhere?
It is a custom by Ehle which @gunmetalshark had done. There was a seperate thread started recently with the proposal to make a bulk custom order, but it has slowed in its tracks untilm there is some confidence that the design is suffciently thought out and optimised.

@Dubmonkey ordered 10 to the USA. If you contact him, he has them up for sale.
 
Last edited:

gunmetalshark

Glass Addict
If it’s IPhone I can. Go to photos and upload the video from there rather than uploading it from camera. It will allow you to choose the HD option .

Yes Iphone and i always upload with the YT App...just saw indeed that there is a HD Option if i try uploading via Photo´s..will try at home as it requires WIFI but if that works out, THANKS ALOT :)
 

gunmetalshark

Glass Addict
Yeah as my Ashcatcher is already on its way to Ehle my go-to setup isn´t available for now and i use the time for some experimenting :) As already mentioned i´m growing on the glassbowl more and more, removing the drop-down and increasing the temp a bit did help quite alot but i still would prefer if i could use less heat :)


Biggest point again and again is that the whole experience can change dramatically if you add/remove a catcher / temp / drop down and so its rly hard to make notes since i´m always stoned pretty fast...and then everything works pretty fine :D :D :D
 
Last edited:

btka

Well-Known Member
I am a micro macro doser. Can you instruct me how to use an eq screen as well as link to the screen to buy? Also I'm debating on whether to get the shower head or the multi dish... have you used both?

I'm looking into getting a fp setup but just some parts. Not the kit.

Will aubers 20mm work with the fp?
https://www.auberins.com/index.php?main_page=product_info&cPath=45&products_id=623
It looks like it has less coils than the NV one...

So far my plan is to buy the auber 300, auber flat and 20mm coil. And then one of the flower pots, and the regular newvape quarts enail for CBD only.

Ugh I hate decisions. Shower head vs quartz...

In not of a fan of ti dabbing because mine always got dirty. With quartz I just torch it off. I like cleanliness and am afraid the showerhead won't be as efficient or clean to use with CBD. On the other hand I will also have a CBD only quarts nail to use...

Any tips or info from anyone would be appreciated. Brand new to emails and somewhat new to dabbing.
here you can find the eq screens https://arizer.com/store/extreme-q-parts-accessories/ I bought mine in my local headshop ... I am using it with this bowl: https://www.newvape.com/flowerpot-male-body-with-handle (do not know if it fits in the other bowls, it should also fit in this bowl with 18mm)
I had to play a little bit to get the baskets fitting, but at the end no problem...
I only own the showerhead!
 
Top Bottom