Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
babaganush
Well-Known Member
For those who want a glass vapcap, I was able to fit the tip perfectly on one of these "OG chillums" I found in a headshop (theyre pretty ubiquitous, at least in the US). It does not have a carb, and it obviously wont fit a condenser in there, but its cheap (was $5), works well and tastes great. Just one note before you go out and buy: these chillums vary a few mm in size, so I had to actually bring the tip to the store and try to find one that fits well (maybe 1 out of 3 fit well).
(Sorry I dont have a pic with it attached, I gave mine away)
(Sorry I dont have a pic with it attached, I gave mine away)
Last edited:
szai
Well-Known Member
Better flavor but the new models are much better to use overall. Also ogs are hard to find because they break.
almost there
Well-Known Member
If there’s enough interest I’m sure we can petition Dynavap to make another limited run for an out of production model. If folks that are interested are willing to pay $50 perhaps George can then source some more durable glass? I’m game if someone wants to contact George and start the thread 
Last edited:
stark1
Lonesome Planet
Yup. Taste is splendiferous
Like a pint of Dolly Madison Butter Pecan ice cream
If there’s enough interest I’m sure we can petition Dynavap to make another limited run for an out of production model. If folks that are interested are willing to pay $50 perhaps George can then source some more durable glass. I’m game if someone wants to contact George and start the thread
Let’s try @Summer she can push her way thru the Berlin Wall. J/K
Last edited:
Carbless Titanium with (non-rotating ) titanium mouthpieces .
beyond6strings
Just another traveller in the Cannaverse
Carbless Titanium with (non-rotating ) titanium mouthpieces .
@stardustsailor I love this kind of look. Elegant and sophisticated and shiny. I love the look of the titanium on its own without anodizing. The one on the left would be so fun/easy to twirl. I'm sure both are. Wow.
@almost there I don't think there will be any more durable glass in the correct size, it's 10mm OD with 8mm ID the cap sort of sets the size.
I have the correct size tube and will be getting some work done to a couple of pieces in the near future.
More than happy to cut a few more if there is enough interest.
Any way glass is so last year, egg is where it's at.
I have the correct size tube and will be getting some work done to a couple of pieces in the near future.
More than happy to cut a few more if there is enough interest.
Any way glass is so last year, egg is where it's at.
almost there
Well-Known Member
that quail egg will come in handy for the munchies that follow, so very practical@almost there I don't think there will be any more durable glass in the correct size, it's 10mm OD with 8mm ID the cap sort of sets the size.
I have the correct size tube and will be getting some work done to a couple of pieces in the near future.
More than happy to cut a few more if there is enough interest.
Any way glass is so last year, egg is where it's at.
. I’m very interested in your glass project, I even picked the colors already, the aqua blue or the gray
Last edited:
stark1
Lonesome Planet
Puffer fish also, me thinks.
that quail egg will come in handy for the munchies that follow, so very practical
Radioactive Cobalt blue, for me, please!
Last edited:
I'm sorry but those glass tubes are the wrong size and destined for stems of one sort or another.I even picked the colors already, the aqua blue and the gray
I only have OG size tube in clear, but a nice idea.
I'm thinking I may have had a conversation about 10mm glass with a 1.5mm wall which would behave totally different to the OG's, and the bowl would be smaller so screens would have to be sourced.
@beyond6strings or @Padriano what size tubes did you have?
@stark1 I'll make a stem out of anything.
There are puffer and porcupine fish on UK Ebay at the moment the latter being under $20
beyond6strings
Just another traveller in the Cannaverse
that quail egg will come in handy for the munchies that follow, so very practical
@almost there I think he's using the vapcap to hard boil it. Vapcaps really can do anything!
needalift
Well-Known Member
@phattpiggie and @stardustsailor , you guys are making me drool over here . That egg piece has some interesting character , like the old school cigarette holders , but with a different twist !! And that knurled stem has manly man written all over it ( I think you ladies here would look great with one too ) .
I'm using 8 mm OD, 5 mm ID glass tubes.. the tip doesn't go into the glass, just butts up against it..
Edit. Oh yeah, we talked about 10 mm OD, 7 mm ID.. Its a challenge I dont need to face!
(Woohoo, first post on the vapcap thread! Hello!)
Last edited:
Me thinks it's 'cause men have larger hands than ladies do (there are -as always -some exceptions ).
So ,in order to get a good hold of small ,metal ( thus slippery ) objects ,men need a more grippy surface .
The razor head pictured ,is considered to be the MOST aggresive safety razor in the whole world
( Muhle R41 aka "The Beast " ) .It's shave is just a tad below the "cut-throat straight razor" shave.
But if that thing slips-accidentally- from the hand while shaving....
Oh...Trust me ..Bloodbath !
( Never really understood while they call this thing a "safety "razor ) .
The original handle the razor came with ,was awfully slippery .
That one pictured has so aggressive knurling job ,that I can even
apply machine grease on my hands
and still shave with the Beast .
( Muhle R41 aka "The Beast " ) .It's shave is just a tad below the "cut-throat straight razor" shave.
But if that thing slips-accidentally- from the hand while shaving....
Oh...Trust me ..Bloodbath !
( Never really understood while they call this thing a "safety "razor ) .
The original handle the razor came with ,was awfully slippery .
That one pictured has so aggressive knurling job ,that I can even
apply machine grease on my hands
and still shave with the Beast .
Still ,myself also ,find very appealing a knurled thingy in ladies hands .
Cheers.
Last edited:
szai
Well-Known Member
@phattpiggie are your quite sure about that? The making a stem out of anything. You already know I have some odd ideas bouncing around in my skull.
Here's one
Here's one
Last edited:
NuhJokaSmoka
Well-Known Member
Ranked up in the stoner Lego game and and unlocked some new items.
Proudly present my Ti M(2017)-XLS, with Ti MP and LE Tip.
Proudly present my Ti M(2017)-XLS, with Ti MP and LE Tip.
Last edited:
needalift
Well-Known Member
I hope that wasn’t a joke on the other side of that link , even though I can’t stop laughing about it
beyond6strings
Just another traveller in the Cannaverse
Ranked up in the stoner Lego game and and unlocked some new items.
Proudly present my Ti M(2017)-XLS, withwTi MP and LE Tip.
Let me introduce you to my new creation. The Silver Sliver. An '18 M Nayshtyle, with Omni mouthpiece, '18 M tip, and no condenser.
Ricardo
Well-Known Member
It was the purest of hits.....lovely airflow, simplicity itself.. .. and you could see the vapor
szai
Well-Known Member
I wish I could get the glass bodies for the Omni. They should do another run of them!It was the purest of hits.....lovely airflow, simplicity itself.. .. and you could see the vapor
