Baron23
Well-Known Member
Hi Larry - do you know anybody in the states that can buy a few, put them in a envelope (they are flat as hell) and just mail them to you?
Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
Errlectric shipping here is very high for just a few screens. Im not sure if Newvape can offer much discount shipping just them alone.
If placing another order then yes it's a no brainer.
I can't remember what bowl @Larrytargeteye has? If old style, Newvape's double Ti's won't fit.
If adjustabowl, NV screens will fit.
Vitolo
Vaporist
I have been having fun with the Flower Pot.
The video has been redone , in just a post down at http://fuckcombustion.com/threads/newvape-flowerpot-twax-vaporizer.23162/page-333#post-1215799
The video has been redone , in just a post down at http://fuckcombustion.com/threads/newvape-flowerpot-twax-vaporizer.23162/page-333#post-1215799
Last edited:
YaMon
Vaping since 2010
@Vitolo nice video, thanks! The changes are pretty constant; my water piece did not have the label, my PID has the connector in the back and they did not include instructions with my kit. My grinder did not come with residue either. LOL Regardless I'd buy it again! Respect! - YaMon
Last edited:
Baron23
Well-Known Member
My assumption was that, as with many other items shipped from the US to the UK, that it may cost him dearly for shipping and customs and possibly be delayed by the customs process.
Considering that they are a low cost, very small, highly lightweight and flat product, I thought that this may be a solution. Envelope and a postage stamp and Bob's your uncle.
I have friends in the UK who are shot-gunners like myself. Spare parts for old Winchesters that I can get readily are a challenge for them and this approach is often the cheapest and quickest.
Perhaps I was wrong...happens frequently LOL
That's all.
Bumped up to 800F with halo WA setup for flowers, thinking this was a compromise to the power of the SH at 777. Beautiful hits doing 0.07gr loads uncapped.
Vitolo
Vaporist
That was my residue!
I have redone the video. Yes it is longer, but with a tool like this it is hard to put it into one short vid!
Last edited:
Larrytargeteye
Vapin' stevens
Im using a panhead adjusta bowl and it came with a standard ti screen @Alexis.i inderstand that i am a fully untrusted member of the forum but if anyone(or group of people)would like to split this cost on a bulk buy id be willing to do the initial 'buy' and share them out once they arrive in the uk.i wish i new people in the states because that is 100% the route i thought of first @Baron23.ill figure it out one way or another though.thanks for the info
Hey dude, just to let you know that you aren't tagging/mentioning people right. See your post above and you see @Baron23 and my own @Alexis are not highlighted and we didnt get an alert.
You basically have to first make sure you typed the username exactly correct, but then importantly also leave a space after the username (and before), or it wont work.
If you put a comma, or full stop right after the username (and start the next sentence without leaving a space after the fullstop), this happens:
@larrytargeteye.com.
As a pose to; @Larrytargeteye .com
As you are typing in a username, a box should come up with the specific name you are tyoing in, or a list of usernames that match what you are typing as you go along. So you can select the member you want to mention that way too by just clicking the name, but remember to leave a space.
If you put a comma right after the username it will not highlight even if you leave a space after the comma. It does seem to highlight it with a full stop, but only if you leave a space after it. I only saw you mention my name above by chance.
Good luck with getting some screens. You want the ones from Newvape, which is better because they did offer a cheaper shipping method than errlectric. (Was about $21(?) compated to $42 tracked etc).
So worst case, order just 2 doubles from Newvape to keep it below £15 customs level, and it will cost you like £16 shipping? That is what I would likely do anyhow.
Last edited:
Danksta
Well-Known Member
For the lighter abv yes I just do a one-n-done. At 777 with the right draw and lung capacity I can watch the vapor start, build, whitewall and then switch to clear all in one hit. I basically just cover the screen with fine grind. About 3 scoops worth.
I've also played with convection dabs on top of flower at 777 and it works very very good. Not quite as tasty as the Elev8r though, but still wonderful
muunch
hotboxing the cockpit
I was around 700-720 last 2 weeks and I could get 1 massive hit (drop head, pull...whitewall...pull for 10-15more sec, exhale) and then another whispy one after a stir.
If I get a full scoop with my kannastor coarse grind plate in the NV scoop it's usually 0.1 - I generally go for that, maybe a little more.
I need to just man up and dump after the first hit since it's never worth going back, and I use my ABV anyway... I dropped my temps back to 680 anyway - I've been dabbing too much (?) and I start coughing bad at night when I'm usually trying to get the most medicated (or it's bc I started using my ecig again? idk? but 5min cough sessions aren't too fun D: )
I got some mighty concentrate pads in I could try convection concentrates too. Maybe will give it a go later? I know @Justpassedu used these at one point, not sure if he still does...
If I get a full scoop with my kannastor coarse grind plate in the NV scoop it's usually 0.1 - I generally go for that, maybe a little more.
I need to just man up and dump after the first hit since it's never worth going back, and I use my ABV anyway... I dropped my temps back to 680 anyway - I've been dabbing too much (?) and I start coughing bad at night when I'm usually trying to get the most medicated (or it's bc I started using my ecig again? idk? but 5min cough sessions aren't too fun D: )
I got some mighty concentrate pads in I could try convection concentrates too. Maybe will give it a go later? I know @Justpassedu used these at one point, not sure if he still does...
Justpassedu
Well-Known Member
Once in a blue moon i will use the concentrate pads , i up my temp but your normal temps you use should be fine. I get 3-6 hits with a small glob of concentrate using one around 675F , carb cap is a must and a somewhat hard pull. The taste doing it this way is just incredible. The 2nd hit is when i start to get nice clouds , not as big as a dab off the dish but definitely visible. Also somewhat keeps things clean. I say give it a try , its not for everyone , double up on a liquid pad will also get it going quicker with your dab at the highest point.
Danksta
Well-Known Member
I honestly feel that second whispy hit likely has little to no cannabanoids. Whatever amount it does is likely too minuscule to make a difference.
I posted a vid one or so pages back doing convection dabs off cotton. I think I liked that over the mesh as you can just toss it at the end of the load so it never absorbs reclaim flavors like SS pads.
I think the best convection concentrate medium I've used is herb to be honest, but I do wonder if I'm actually finishing the concentrate before the flower is vaporized.
Hey everyone I have a kind of dumb quick question. I was wondering if any screen will work for these devices? I got my flowerpot last week and am loving it but forgot to order extra screens, and was wondering if any screens from my local head shop would work? Thanks
Justpassedu
Well-Known Member
Yes just be sure to buy them a drop bigger than the bowl and cut to size your self with scissors.
Easywider
Simple is the way
Yep a good fitting screen also seems to be key for keeping glass clean. I have the errletric dbl weaves and they are a pinch smaller then NV dbl weave (almost unnoticeable) but its enough that if i'm muddling around some full nug or aggressive brush wiping I can easily force some AVB dust past the outside edges of the screen and then dirty water 
Vaporware
Well-Known Member
@maxymods .75” or .78”* screens from a local shop should fit fine, but if you care about Titanium screens vs Stainless Steel or Brass you’ll probably have to put in another order instead.
I asked at several local shops when I forgot to buy screens with the Flower Pot, and none of them had ever even heard of titanium screens. I did try buying some backups to get me through to my next order, but they gave me .65” screens which were too small. I guess I should have double checked the size before leaving the store.
Ultimately I just ordered another bowl, some single and double weave Ti screens and a few other things from NewVape and now I wish I’d just done that in the first place. If you don’t mind using SS or Brass screens though, yes the right size from a local shop will work fine.
* .78” only fits the Shovelhead and Panhead bowls, but they can also take .75” like the rest, they’ll just be a little looser.
I asked at several local shops when I forgot to buy screens with the Flower Pot, and none of them had ever even heard of titanium screens. I did try buying some backups to get me through to my next order, but they gave me .65” screens which were too small. I guess I should have double checked the size before leaving the store.
Ultimately I just ordered another bowl, some single and double weave Ti screens and a few other things from NewVape and now I wish I’d just done that in the first place. If you don’t mind using SS or Brass screens though, yes the right size from a local shop will work fine.
* .78” only fits the Shovelhead and Panhead bowls, but they can also take .75” like the rest, they’ll just be a little looser.
LabPong
Well-Known Member
Yep a good fitting screen also seems to be key for keeping glass clean. I have the errletric dbl weaves and they are a pinch smaller then NV dbl weave (almost unnoticeable) but its enough that if i'm muddling around some full nug or aggressive brush wiping I can easily force some AVB dust past the outside edges of the screen and then dirty water
I got tired of this issue and just ended up using a drop down to keep everything much much cleaner and easier to deal with. The drop down can also aid in softer perc action and possibly less blowback. Give one a try.....I posted my setup a page or two back.
NewVape FlowerPot Twax Vaporizer
http://www.popularglass.com/glass-b...bowls-with-handle-joint-size-188mm-p-257.html
This is the 18mm, so would have to use the SH inverted. Haven't come across the 14mm yet.
http://www.popularglass.com/glass-b...bowls-with-handle-joint-size-188mm-p-257.html
This is the 18mm, so would have to use the SH inverted. Haven't come across the 14mm yet.
mixchu69
Well-Known Member
i think this was asked before, but couldnt find it on the search function. I currently have the whole showerhead setup and am planning to purchase the wraparound for my dnail halo tonight. Is there anything other than the wraparound that I need (like a 16mm or 20mm post???)? I already have the d-nail carb cap and sic/quartz halos. Thanks.