Dynavap VapCap

smokeydabear

smokeydabear

Well-Blown member
Squiby said:
I received this special and unique spinning mouthpiece from George. I have it set up here with the Omni titanium stem. The pattern nicely goes with The stem It's one of just a few made and it's sterling silver, not titanium. I think it's a beauty!

Lr8r5ox.jpg

jl1NeTD.jpg

And here it is with a BLackwood VonG.
lxKD9Yb.jpg

Sweet!
Click to expand...
Wow thats truly stunning, it looks like its made of diamond. Couldn't imagine a more fitting person to have that jewelry than the queen of vapcaps:nod:
 
mucsusn

mucsusn

60 going on 20
Just hanging out on a cold night on the East Coast, having a wonderful stout (Oskar Blues Ten Fidy) and nursing my lego OmniVong with my @Pipes Portside at hand. These little things are just flat out fucking awesome for taking a tiny amount of herb and drilling a hole into your head. Life is good:cheers:
 
Squiby

Squiby

Well-Known Member
My new stems from @stardustsailor arrived a few weeks ago and I have been enjoying them immensely. They are as lovely as can be. This beautiful 62mm blue stem is made from niobium and the anodized color is intense.

SmdWmda.jpg

This one is a 79mm hammered titanium stem. It has been anodized both blue and a coppery pink. It also has a stylized mouthpiece that is nice on the lips.
vszFOuv.jpg

Here are the two new stems posing with my favorite lighter.
GOZE1iy.jpg


These stems are more beautiful in person. I thought that they were stunning when they arrived, but they even still continue to grow on me.

LEGO was always one of my favorite childhood games. I'm so happy that that primal satisfaction can now be fulfilled by the Vapcap.
 
Papi

Papi

SevGen
Squiby said:
My new stems from @stardustsailor arrived a few weeks ago and I have been enjoying them immensely. They are as lovely as can be. This beautiful 62mm blue stem is made from niobium and the anodized color is intense.

SmdWmda.jpg

This one is a 79mm hammered titanium stem. It has been anodized both blue and a coppery pink. It also has a stylized mouthpiece that is nice on the lips.
vszFOuv.jpg

Here are the two new stems posing with my favorite lighter.
GOZE1iy.jpg


These stems are more beautiful in person. I thought that they were stunning when they arrived, but they even still continue to grow on me.

LEGO was always one of my favorite childhood games. I'm so happy that that primal satisfaction can now be fulfilled by the Vapcap.
Click to expand...
They are indeed beautiful. I love my sculpted ti omni but wow . What kind of lighter is that?

George fixed me up with a very nice pkg of gifts after an unfortunate incident with the M...but I have never seen anything like the silver sculpted spinner mouthpiece .
Now these beautiful mid sections made my VAS kick in. O no
 
Last edited by a moderator:
Vapoleon

Vapoleon

Vapoleon Bonaparte
Hey guys!
In this couple of days I read a lot about the Dynavap M but I'd like to ask about your opininon.
Im vaping since 6-7 years, I used EQ, Air, MFLB, iolite and sone more, but i think my next step will be the model M because it seems practically indestructible.
Am I right with my choice if what I need is the simplicity?
A vape that is easy to hide, fast to use, and very very durable.
I really like the Ti versions and this LEGO game with it, maybe in the future i'd like to purchuase some ti too, but now i need something that i mentioned above, easy to use and clean, very stealth, very easy to hide, no batteries, no butane gas, something so easy than the dynavap.
I have an mflb, and i love it, but it needs electricity to recharge so it is not my option now.
The ti is not annoption now, i will biy later if i like the M, now i need te simplest yet effective solution to vaporize!

Would U recommend me the model M in my case? :)
If yes, Should I buy 2 of them to have a backup or it is very very durable so I need just one?
I will have to hide it, but i could hide 2 of them in two places.
Any suggestions? :)
 
Vapoleon

Vapoleon

Vapoleon Bonaparte
Also I have not found it yet:

A simple candle light or a Bic lighter does the job or I really need a torchlighter?
Becouse of stelth it would be easier to use siple heat sources.
These normal heat methods cause more blackenings to fhe tip i mean carbon or dirt on it?
 
Vapoleon,
A

asdf420

Well-Known Member
a bic is sort of ok indoors but pretty annoying to wait for.
a candle will give off too much soot, you'll keep painting your face with it after touching the cap
some torches are only slightly larger than a bic, if you mean carrying stealth. if you want to use it stealthily, you need an induction heater or a torch with a thing covering the flames, I guess
 
asdf420,
  • Like
Reactions: Vapoleon
FabulatorPoeta

FabulatorPoeta

Where has the time gone?
Vapoleon said:
Also I have not found it yet:

A simple candle light or a Bic lighter does the job or I really need a torchlighter?
Becouse of stelth it would be easier to use siple heat sources.
These normal heat methods cause more blackenings to fhe tip i mean carbon or dirt on it?
Click to expand...

asdf420 said:
a bic is sort of ok indoors but pretty annoying to wait for.
a candle will give off too much soot, you'll keep painting your face with it after touching the cap
some torches are only slightly larger than a bic, if you mean carrying stealth. if you want to use it stealthily, you need an induction heater or a torch with a thing covering the flames, I guess
Click to expand...

I am very happy with the M though it's considered by many here as the entry point in the Vapcap Legoland. One is enough but once you have used it you might consider making a gift to a good friend who will be forever grateful.

I vape only inside but in such context I find that a flame from a small lamp is perfect for me.

It does blacken the cap (you can wipe off some of it after use) but I see this as life's patina.
Enjoy this vape. It is truly unique and a renewed pleasure everytime.
 
Last edited:
M

MAbud

Well-Known Member
I have had tremendous success with @VapCap products but not as much luck with @VapCap service...

I recently attempted to order a Dynastash XL for my Omni XL. I was sent awesome pictures of a live edge burl version and ordered it immediately. I was beyond pumped for it as it was everything I wanted! After I paid it was discovered that it was, in fact, a regular and not an XL. I understand mistakes happen but I was not offered any type of discount or anything towards making up for the misunderstanding. I still proceeded with a new order and I had to write in twice for a shipping update because it took 3-4 days to ship without any communication as to why.

On top of that I received a defective Tron lighter. I have been told on 3 separate occasions that a replacement would be sent to me, and that has yet to happen.

I fully understand I am in the minority here but I do hope this thread is not too fanboy and allows for open discussion. I am hopeful I am not going to get 50 replies telling me why your version was different than mine. I fully acknowledge that is likely the case but does not discount my experience from being mine. I absolutely love the products and will continue to support @VapCap but from my perspective there is room for improvement on the communication and order processing side...
 
stark1

stark1

Lonesome Planet
Papi said:
Anyone know if dynavap is working on their own induction heater?
Click to expand...



Not yet. But you can try.

Darn! wrong proprietary connector. :\

6PqQreL.jpg

MAbud said:
I have had tremendous success with @VapCap products but not as much luck with @VapCap service...

I recently attempted to order a Dynastash XL for my Omni XL. I was sent awesome pictures of a live edge burl version and ordered it immediately. I was beyond pumped for it as it was everything I wanted! After I paid it was discovered that it was, in fact, a regular and not an XL. I understand mistakes happen but I was not offered any type of discount or anything towards making up for the misunderstanding. I still proceeded with a new order and I had to write in twice for a shipping update because it took 3-4 days to ship without any communication as to why.

On top of that I received a defective Tron lighter. I have been told on 3 separate occasions that a replacement would be sent to me, and that has yet to happen.

I fully understand I am in the minority here but I do hope this thread is not too fanboy and allows for open discussion. I am hopeful I am not going to get 50 replies telling me why your version was different than mine. I fully acknowledge that is likely the case but does not discount my experience from being mine. I absolutely love the products and will continue to support @VapCap but from my perspective there is room for improvement on the communication and order processing side...
Click to expand...


Sorry about your experience, Bud! They are an industrious lot, and have a lot on their plate.

Try communicating with @Arielle.Dynavap she’s been responsive to my requests in the past. Best wishes.
 
Squiby

Squiby

Well-Known Member
Papi said:
What kind of lighter is that?
Click to expand...
It is my favorite lighter. I have several that I rotate through.

https://www.ebay.ca/itm/Cylinder-Flint-Wheel-Windproof-Jet-Flame-Cigarette-Cigar-Butane-Gas-Lighter/321688265150?_trkparms=aid=111001&algo=REC.SEED&ao=1&asc=20160908105057&meid=e8bb65e8d0ab4487bc8455ed525710c5&pid=100675&rk=1&rkt=15&mehot=pp&sd=321688265150&_trksid=p2481888.c100675.m4236&_trkparms=pageci%3A2cf068ed-fc77-11e7-90f7-74dbd180b86c%7Cparentrq%3A0a5edbcd1610a86046a5978affd8e801%7Ciid%3A1

It is an Aomai lighter. They are cheap and reliable. The size of the Vapcap. A Dynastash can be modded to accommodate it. It is quiet because it ignites with a flint. You don't need to hold a trigger down. It is a single jet butane lighter.

Vapoleon said:
i think my next step will be the model M because it seems practically indestructible. Am I right with my choice if what I need is the simplicity?
A vape that is easy to hide, fast to use, and very very durable.
Click to expand...

Yes. The M has a genius design that it simple and is very easy to dismantle and clean. If you have a minute you can load your Vapcap, heat and toke a few cycles and dump your ABV. The M will get you stoned in a minute or less. The all stainless steel construction makes it near indestructible.

No butane enters the air path becauss you heat THEN toke so there is no flame near your face.

Vapoleon said:
Should I buy 2 of them to have a backup or it is very very durable so I need just one?
Click to expand...
Yes, buy two and gift one to a friend. You only need a back up in case you loose or misplace it.

Vapoleon said:
A simple candle light or a Bic lighter does the job or I really need a torchlighter?
Click to expand...
A soft flame from a candle works fine indoors. Keep the M well above the flame to avoid soot build-up on your cap. A bic works but you need to hold down the trigger for about 30 seconds and your thumb will get hot.

A small butane jet lighter will reduce your heating time significantly. Any jet lighter will do from one to four jets. I recommend that you start with multiple jets as they are easier for newbies to get consistent results.
 
Ricardo

Ricardo

Well-Known Member
FabulatorPoeta said:
you might consider making a gift to a good friend who will be forever grateful.
Click to expand...
I've only done the "M for a Friend" thing once and although he says he uses it occasionally and likes it, I'm guessing he hasn't had the blissful cloudy experience that many of us enjoy :\ Not everyone has the patience to try, try again - many fall back to rolling their Js or using electronic vapes :huh:
 
Boden

Boden

Aspie polymath
I’m curious... now this may seem off topic but it really isn’t since it is about the Vap enthusiasts on this thread.

In as few words as possible what is your second favorite vape after the Vap?

Just reply to this post with the name. No expounding is necessary.
I’m curious if a pattern will emerge.
 
You must log in or register to reply here.
Top Bottom