Discontinued Ghost MV1

Zow237

Well-Known Member
Wish I could really comment on the device.... mine won't turn on :( sucks just charged it up again to give it another round and nope. Fuck. Plugged it into the computer and now I'm up and running
 

lazylathe

Almost there...
Wish I could really comment on the device.... mine won't turn on :( sucks just charged it up again to give it another round and nope. Fuck. Plugged it into the computer and now I'm up and running

Have you done the one long press after inserting the battery? Then once the lights turn off, 3 rapid presses to turn it on. I think it vibrates.
 

Zow237

Well-Known Member
Yeah I did. Device locked up. This thing is a big pain in my ass and I'm the least bit happy about it. I had figured everything out, took a nap and then couldn't get the same results later. Gave up for today. I wasted a ton of weed trying figure things out. When I didn't get it to work, I wasn't blown away but literally that was only one crucible this happened for
 

Zow237

Well-Known Member
I might be giving up on this thing for good. Idk what to do to make it work every single time. I'll get one draw little draw of vapor and then nothing next couple pulls. I really just don't understand. I'm doing everything right??? Mayb I'll do a video of me trying to get it to work
 
Zow237,
  • Like
Reactions: Jill NYC

Zow237

Well-Known Member
I had problems in the beginning as well. Uneven abv. Overheating. Bad clouds. Charing.
The solution was (as told from every side):
Filling the crucibles less full (max 80%) with dry (!!!pretty important IMO) material. Vaping in Level 4
... Boom..best vape ever

What's the deal with mine locking up. Went to go turn it on again and nothing. Fully charged battery. Holding button down and nothing. Mayb I just need To pack less then
 
Zow237,

Tranquility

Well-Known Member
What's the deal with mine locking up. Went to go turn it on again and nothing. Fully charged battery. Holding button down and nothing. Mayb I just need To pack less then
Wasn't "locking up" considered a feature of the vape? You might try the app. If it still has the "find my vape" function advertised in the first post in this thread, you might screw with it a bit to see if you can unlock the vape in case it is not a defect in some way.
 
Tranquility,

Zow237

Well-Known Member
Yeah that doesn't work if you can't turn the device on. The app works with a device that's powered on. I haven't hit the lock button on the app... so it shouldn't be locking uppp
 
Zow237,

Bologna

(zombie) Woof.
You only hold down the button once for a few seconds when you first pop a battery on to put it in standby mode. After that, press it 3 quick times to put it in vape mode.
 
Bologna,

Zow237

Well-Known Member
You only hold down the button once for a few seconds when you first pop a battery on to put it in standby mode. After that, press it 3 quick times to put it in vape mode.

I know how to use the interface. The vape isn't turning on. Thanks
 
Zow237,

Bologna

(zombie) Woof.
I know how to use the interface. The vape isn't turning on. Thanks
Ok, well, if the device is just broken then you should PM Patrick (@“ghostvapesofficial”) on the Vape Life forum. I’m sure he’ll get you whatever you need. It is the best way to contact him/them.
 
Bologna,

Zow237

Well-Known Member
Ok, well, if the device is just broken then you should PM Patrick (@“ghostvapesofficial”) on the Vape Life forum. I’m sure he’ll get you whatever you need. It is the best way to contact him/them.
already did ;). working with Patrick right now
 
Last edited:

SirCrackKillaH

Well-Known Member
already did ;). working with Patrick right now
Oh man, I was looking down this too and was like 'not turning on' shiit. Only time mine didn't turn on twice was when I forgot about that long hold after popping the battery in to get it outta sleep mode. At any rate though, then ghost cats are cool man and seem to always be active. Holidays it was understandable, they look to be back in full swing now.
 

420golfer

It helps my backswing
...Filling the crucibles less full (max 80%) with dry (!!!pretty important IMO) material. Vaping in Level 4... Boom

I found dry is better as well. Level 4 set to 375°, producing such great vapor and really good effects. I'm getting better vapor on 1.2.8 but it feels like 1.2.3 had better battery management.

Just staring outside waiting for ups. Did I just hear someone dropping off a couple of crucible holders??? (snicker)
 

vapenerd

Well-Known Member
Hopefully this company survives. The vape looks promising, still not convinced tho.

Maybe the MV2? We'll see! :)
 
vapenerd,
  • Like
Reactions: Zow237

SirCrackKillaH

Well-Known Member
I found dry is better as well. Level 4 set to 375°, producing such great vapor and really good effects. I'm getting better vapor on 1.2.8 but it feels like 1.2.3 had better battery management.

Just staring outside waiting for ups. Did I just hear someone dropping off a couple of crucible holders??? (snicker)

Crucible holders are definitely sweet. Gives me peace of mind now knowing these things aren't going to spill out all over in the makeshift cases I've been using. I've got one in my pocket right now, makes me feel powerful lol
Just like that dosing capsule caddy man. Just makes it 10x easier to run around with multiple sessions ready to go. Love it :D
 
SirCrackKillaH,

Zow237

Well-Known Member
can anyone comment on the satin silver? I don't like the gloss finishes, dust collectors and fingerprints all over the black one I have. was wondering if the satin was more of a matte finish? looks like it in the pics
 
Zow237,

420golfer

It helps my backswing
can anyone comment on the satin silver? I don't like the gloss finishes, dust collectors and fingerprints all over the black one I have. was wondering if the satin was more of a matte finish? looks like it in the pics

Satin silver does not show prints except on the crucible door and latch which are chrome and collect prints.

I wouldn't call it a matte finish. It has somewhat of a shine but again does not show prints.
 
420golfer,
  • Like
Reactions: Zow237

lazylathe

Almost there...
can anyone comment on the satin silver? I don't like the gloss finishes, dust collectors and fingerprints all over the black one I have. was wondering if the satin was more of a matte finish? looks like it in the pics

That's what i went for and it does not show prints on the main body.
The latch and door do print but easily rubbed off with a t-shirt etc..

I went for it due to it being the least shiny model.

Exactly as @420golfer
 
lazylathe,
  • Like
Reactions: Zow237

Custom Flower Hardware

Well-Known Member
Manufacturer
ggZkMTF.jpg

hOpaxTs.jpg

Now dat's a beautiful thing!:tup:
 

420golfer

It helps my backswing
Finally a nice fuckcombustion day!:science:

Ohhhh so jealous as I sit here in 6° weather for 2 weeks. Did I hear that distinctive click of an MV1 power button at the beginning of your video? So familiar!

I would be frozen solid making a video so some MV1 porn will have to do. Full charge to dead, crucible holders won...

9SNxYuA.jpg
 
Last edited:

Custom Flower Hardware

Well-Known Member
Manufacturer
Ohhhh so jealous as I sit here in 6° weather for 2 weeks. Did I heard that distinctive click of an MV1 power button at the beginning of your video? So familiar!

I would be frozen solid making a video so some MV1 porn will have to do. Full charge to dead, crucible holders won...

9SNxYuA.jpg
just saw your sweet pic in the vapelife forum! :tup:I guess 2 is better then 1.:razz:
 
Custom Flower Hardware,
Top Bottom