• Do NOT click on any vaporpedia.com links. The domain has been compromised and will attempt to infect your system. See https://fuckcombustion.com/threads/warning-vaporpedia-com-has-been-compromised.54960/.

Sinnoah

Member
Hey guys, after a succeful short relation with my m, im starting to get REALLY interested with the omni.

I happen to find some people in reddit that had their omni condenser screw separated from the condenser body and therefore loosing the airflow adjustment capability.

This makes me feel that the M, although simpler in design, makes it more durable because of it. Any comments? Am I being too paranoid?
 
Sinnoah,
  • Like
Reactions: kushkush

mucsusn

60 going on 20
Hey guys, after a succeful short relation with my m, im starting to get REALLY interested with the omni.

I happen to find some people in reddit that had their omni condenser screw separated from the condenser body and therefore loosing the airflow adjustment capability.

This makes me feel that the M, although simpler in design, makes it more durable because of it. Any comments? Am I being too paranoid?
The Omni condenser screw........think about that..........a screw........in a manual device. And it will come apart if you turn it. I wonder what happens if you learn this beautifully designed and manufactured piece so that you understand its mechanical interactions.......:sherlock:

Once in a great while I will stop by reddit, and run away screaming. Most of the time it’s a traffic jam of stupid:bang:
 

Dynalowrider

Well-Known Member
If you keep unscrewing something it will eventually run out of threads, folks.
I get so frustrated with people buying something and not learning how it works. When you buy a Vapcap, field strip it, put it together, field strip it, put it together, repeat, repeat, repeat, until you know how it works and how it fits together. You have to step up and shoulder the responsibility of owning and using the damn thing. I like everyone on here, but newbies need to quit asking someone else to do their job.
I can not tell you how to use it. I can tell you how I use it, and I have already done so, many times. READ THE THREAD, or at the very least the Best Of thread. Ok, rant over. Pineapple Express is kicking in. Doc
 

stardustsailor

Well-Known Member
Accessory Maker
All I can say is - If someone of you ever gets hit by a Vapcap out of nowhere: Sorry for that! ;)

Breaking news!
Latest shelfie image from Curiosity freezed NASA experts :
A small metallic object of unknown origin has landed on top of Curiosity's mast panoramic camera !




Your lost cap ,maybe ?
:zombie:

 
Last edited:

cybrguy

Putin is a War Criminal
a traffic jam of stupid:bang:
I like that. That should be a banner on the front page of reddit.
Latest shelfie image from Curiosity freezed NASA experts :
A small metallic object of unknown origin has landed on top of Curiosity's mast panoramic camera !
How frustrating that will be for the Martians. We'll have to let Musk's first crew know they will need to bring along a stem, condenser and tip.
 

Squiby

Well-Known Member
I happen to find some people in reddit that had their omni condenser screw separated from the condenser body and therefore loosing the airflow adjustment capability.

This makes me feel that the M, although simpler in design, makes it more durable because of it. Any comments? Am I being too paranoid?

That person did not have the Omni assembled properly and had the mouthpiece unscrewed from the condenser. The mp and condenser screw together and the threads allow you to just engage the threads or to screw them together tightly all the way, or any adjustment in-between. Screwing it together opens the airpath and unscrewing legthens the condenser and pushes it farther into the tip or herb chamber thereby cutting off the air flow. The assembly is meant to be adjusted through screwing the mouthpiece further on or off the threads. Like any threaded implement you can disassemble by screwing all the way off. Think of how a a nut and bolt works.

The M is the basic entry level, all stainless steel Vapcap. The Omni is the top of the line all titanium Vapcap with it's precision milled titanium tip, condenser and mouthpiece.

The M is the least expensive Vapcap at $50. It has a stainless steel construction, including the tip. It is a great vaporizer but is basic in its design and engineering compared to the titanium tipped series of Vapcaps. Although you can switch out the stainless steel stem for other stems or Body/mp combinations, it does not have full modularity. For example, the Omni condenser will not function properly with the M tip. The ss tip is not quite as nimble as the ti tip with fewer, more shallow air channels. It likely has a greater conduction ratio. The M is a fantastic economical vaporizer.

The all titanium Omnivap is the top of the line. It is a beast. The build is very tight, beautifully engineered with incredibly tight tolerances and should be considered a work of art. The Omnivap is beautiful and could be considered indestructible. The Omni condenser/mp is not only a precision milled component which offers a set it and forget it airflow, perfect for use with water pieces, but it's robust core offers additional strength and density to the overall design. The titanium tip is more finely crafted and precision engineered than the stainless steel M tip. It has an more air channels and they are wider and deeper and has finely milled fins. There is an addition oring to create a tight fit onto the condenser and into the body or stem. I think that the 5th gen ti tips offer a higher convection ratio. You can run over your Omni with your car but I don't think the M may not fare so well.

The full modularity of the ti tipped Vapcaps mean that you can switch up bodies and stems, straight or VonGs, mouthpieces and condensers.

Here is the link to the Vapcap Best of Thread.

http://fuckcombustion.com/threads/best-of-dynavap-vapcap.24345/
 

snackmaster

Well-Known Member
This may have changed on newer models, but my omni condenser has 3 pieces: ti mouthpiece with female threading, ti "collar" with male threading, and ss condenser. The collar piece is press fit onto the condenser. I've seen posts where the collar has come loose from the condenser (@WakeAndVape?).

@Sinnoah, is that the problem you're talking about or is it something different?
 

snackmaster

Well-Known Member
Thanks for clarifying, @Sinnoah. You'll obviously avoid that issue entirely with the M, but it's not common at all so I wouldn't let it stop you from getting an omni if that's what you really want.
 
snackmaster,
  • Like
Reactions: Squiby

Kalessin

Well-Known Member
I sadly suffer from ocd and in that regard the M is truly a worry free piece. I’ll just buy more for backup sake haha
the omni is really tough, more durable than probably any vape on the market. And on the unlikely chance that something does go wrong Dynavap has amazing customer service and would have you fixed up in no time
 

TheResistance

Well-Known Member
Hey guys, after a succeful short relation with my m, im starting to get REALLY interested with the omni.

I happen to find some people in reddit that had their omni condenser screw separated from the condenser body and therefore loosing the airflow adjustment capability.

This makes me feel that the M, although simpler in design, makes it more durable because of it. Any comments? Am I being too paranoid?

Brother, the Omnivap will not break on you. The people that had it separate from the condenser tube are doing something very wrong. It's engineered extremely well, idk if george is an engineer (I assume he is) but a lot of thought went into this. So if this is something you want, don't worry and jump on it!
 

WakeAndVape

VapeLife X
This may have changed on newer models, but my omni condenser has 3 pieces: ti mouthpiece with female threading, ti "collar" with male threading, and ss condenser. The collar piece is press fit onto the condenser. I've seen posts where the collar has come loose from the condenser (@WakeAndVape?).

@Sinnoah, is that the problem you're talking about or is it something different?
same thing with mine.
Hey guys! Thanks for your responses, much appreciated it!

Check this image, this is what im talking specifically, perhaps I was not clear enough.

https://m.imgur.com/gallery/W73wp
i'm sure every case is different...but mine came seperated and i thought thats what it was supposed to do, after talking to dynavap i figured out that it wasn't supposed to be like that and they sent me a replacement...

when i got the new one i realized that having the 'broken' condenser did not affect performance, it would just slide every once in a while.
 

marduk

daydreamer
Brother, the Omnivap will not break on you. The people that had it separate from the condenser tube are doing something very wrong. It's engineered extremely well, idk if george is an engineer (I assume he is) but a lot of thought went into this. So if this is something you want, don't worry and jump on it!

Those people (I'm one of them) didn't do something very wrong. When mine separated, Matt took care of it very quickly and knew what the issue was right away. He explained that there was a batch of tubing where the tolerance was slightly off, and that caused the press fit pieces to work loose with time and use. The replacement condenser has been rock solid with daily usage.

Omnivap is still my #1.
 

pxl_jockey

Just a dude
The Omni condenser screw........think about that..........a screw........in a manual device. And it will come apart if you turn it. I wonder what happens if you learn this beautifully designed and manufactured piece so that you understand its mechanical interactions.......:sherlock:

Once in a great while I will stop by reddit, and run away screaming. Most of the time it’s a traffic jam of stupid:bang:

Whenever I wind up on reddit, I always regret it. It seems as though most everyone is really immature, and I feel sorry for anyone seeking knowledge there. A member over there did something unwise and made the mistake of admitting to it and seriously the next 50 comments were members dogging the kid, name-calling, just ugly crowd-mentality stuff.

Makes me so grateful for the FC rules of conduct, even more so for the members who create a culture of kindness, generosity, and helpfulness. Multiply this by 100 in these parts. Unfortunately, this doesn't reflect the reality elsewhere in cyberspace. Which is why FC is so important for many members, I suspect.

@Dynalowrider Preach it Doc! Vapcaps deserve a certain level of commitment to achieve optimal results. Having so few parts means easy cleaning when required, easy maintenance and repairs if needed. Seems lately in a few threads I frequent the level of posts with questions that were answered 2 pages back, or someone says "convince me X is best", or "I need help and am too busy to read this whole thread. I have a life!" have gone up considerably. My favourite? "I've tried 3 times/hours/days and either its busted or sucks. I give up!" or something to that effect. Why must so many be so stupid? Also, just my impression but in several threads I haunt, there's an uptick in the level of confrontation or defensiveness amongst members. Makes me sad because there's not so many of us vaporists, we should be kind and seek to understand one another. This stupid hippie-dippie sentiment is mine alone. YMMV! :cool:

Secret confession:
I love my wife, Dynavap, my dogs, my sons, FC, my extended family including my mother. In that order. :brow:

EDIT: sorry, this reads way harsher than I originally intended. Probably broke the rules by calling some members stupid, def not cool. That was stupid of me, lol! I should just read today and leave the posting to more positive people.
Oh and my flesh and blood children slightly edge out our furry ones, one of whom is named George. And without FC there would be no DV for me, so that's inaccurate too. Okay, all the souls under my roof, the woman who gave me life, and then FC & DV, my RL friends and extended family. This ranking seems more socially acceptable; but in my defence my sons are teens and our dogs are really well behaved and talk back much less...just saying, an argument could be made.
 
Last edited:

phattpiggie

Well-Known Member
Accessory Maker
Modular design done in African Blackwood, Mexican Cocobolo with aluminium accents.
A Mi/VC/WS/Tubo/Zion 18mm stem, one of a set of 3 different pieces all done in the same 'Dark Matters' design.
12euBwH.jpg


@stark1 that diamante stem is close to where I'm hoping to go, close.
 
Last edited:

Kermitt

Well-Known Member
My condenser and threads aren't tight together either. Every few days I have to readjust the thread. I've always been unsure whether it's right or wrong.
 
Kermitt,

phattpiggie

Well-Known Member
Accessory Maker
@Kermitt the two parts are supposed to be an interference fit which means once put together they should not come apart without some force.
Unfortunately Dynavap are at the mercy of tube suppliers and they both will work to a certain +/- tolerance.
If the thread is on the + side and the tube on the - side of the tolerances there is the possibility of the pair not holding fast. I would contact DV and explain the problem.
 

mucsusn

60 going on 20
My condenser and threads aren't tight together either. Every few days I have to readjust the thread. I've always been unsure whether it's right or wrong.
@Kermitt, can you clarify........does the condenser separate from the side with male threads, or does your male and female threaded connection come apart. I ask as it is two separate issues.
 
mucsusn,
  • Like
Reactions: Squiby

Kermitt

Well-Known Member
@Kermitt, can you clarify........does the condenser separate from the side with male threads, or does your male and female threaded connection come apart. I ask as it is two separate issues.
From the side with the threads, in the direction of the mouthepiece. The condenser slips further into the tip
 
Kermitt,
Top Bottom