Dynavap VapCap

metaknight · Nov 10, 2017

stark1 said:
Carb cap?

Around the air intake, it is slightly smaller than the diameter of the body, 25/64”, or 9.92mm.

@pxl_jockey, @Summer IS a cool Dude, with latex suit, and a Reminds me of a DI in PI.

But, nice.

Dude.

I just bought 2 of them, it seems like it would be useful for not having to hold my thumb over the (I call it carb cap because it's exactly the same as a carb on a pipe, closing off air or mixing air with the vapor) carb. :lol:

cybrguy · Nov 10, 2017

Smokey McVape said:
Your body is different to mine as mine is a completely hollow tube.

That is the difference between the OG and the body for the glassy. If yours is completely hollow than it is likely the latter like @stark1's pic on the last page.

Squiby · Nov 10, 2017

cybrguy said:
That is the difference between the OG and the body for the glassy. If yours is completely hollow than it is likely the latter like @stark1's pic on the last page.

The OG Vapcap was the original Vapcap with only the cap sharing a common element with other Vapcaps. The OG had a one piece glass tip/body, a glass condenser and a rubber mouthpiece to hold it all together.

http://fuckcombustion.com/threads/dynavap-vapcap.18853/page-20

The Vapcap S expanded the OG by replacing the glass condenser and rubber mp with a standard condenser and x-rings

The Ti Glassy used a Titanium tip along with a 62mm glass stem and standard SS condenser with x-rings.

The glass stem of the Ti Glassy is a 8mm ID glass tube while the OG tip/body is a glass tube that is crimped to create a bowl into which sits the screen.

cybrguy · Nov 10, 2017

So the Vapcap S still used the glass tip? The S was just for the Spinning MP?

I had completely forgotten about the Vapcap S.

kushkush · Nov 10, 2017

Gigsabits53 said:
I use concentrates when I can get it. If I had to pick one for the rest of my life, flower all day every day. I do like to dab before bedtime, I sleep so much better. Concentrates could completely erase the need for sleeping pills ime. I prefer flower but like the fact that there are options.

We use our Vapcaps for both flower and Concentrates, and I use a Tincture at night for pain/sleep. Personally I think both flower and Concentrates will survive forever.

Here’s a link (below) of a very well-written article which states that.......

“States are reporting massive gains in concentrate sales while flower is on the sharp decline. It’s unlikely that this will go on forever, but market upside indicates that this trend could last for some time.”

https://potguide.com/pot-guide-mari...s-becoming-more-popular-than-flower/#comments

Squiby · Nov 10, 2017

cybrguy said:
So the Vapcap S still used the glass tip? The S was just for the Spinning MP? I had completely forgotten about the Vapcap S.

The Vapcap S was a two-for. It consisted of a complete OG Vapcap plus a standard stainless steel condenser with spinning mp.

The Glassy was the most inexpensive ti tipped Vapcap offered. Costs were low due to the midsection being a plain glass stem.
A Ti Glassy.

cybrguy · Nov 10, 2017

Yeah, I skipped that. Went right to my Ti Woody S after the OGs...

The Blackwood Ti Woody S is still my favorite.

Even with it's Gen3 tip.

Squiby · Nov 10, 2017

cybrguy said:
The Blackwood Ti Woody S is still my

That was my first Woody as well. A Blackwood body and a burl mp. It too is my favorite Woody. Classic!

stark1 · Nov 10, 2017

After after my (mis-) adventures with my OG glass, I went out and got some comfort food

cybrguy · Nov 10, 2017

Man I LOVE those candies. And my JarHead too...

And this, of course, is the best Toffee in the whole fucking world.

http://www.coraleecandies.com/marketplace/

And anyone who thinks this is off topic isn't high enough... :rofl:

metaknight · Nov 10, 2017

Holy crap!

Vapor bonging with the M is insane!

@Ratchett Thank you for the amazing NUSonG large adapter! It works wonders :love:

Squiby · Nov 10, 2017

Years ago, I got the recipe for those Butter Toffees and ended up making just one batch. I stuffed myself so silly on them I swore that I'd never make them again.

Stuffing a Vapcap is less hazardous and has way less side effects.

WarpaintFree · Nov 10, 2017

Quick fact check: I'd like to set my mother up with a water pipe for her M.

All I need in terms of parts is a stem length Nonavong, correct? (Forgoing the fat MP thingy...)

DirtyD · Nov 10, 2017

WarpaintFree said:
Quick fact check: I'd like to set my mother up with a water pipe for her M.

All I need in terms of parts is a stem length Nonavong, correct? (Forgoing the fat MP thingy...)

You are a good son, yes that would work I'm pretty sure

stark1 · Nov 10, 2017

WarpaintFree said:
Quick fact check: I'd like to set my mother up with a water pipe for her M.

All I need in terms of parts is a stem length Nonavong, correct? (Forgoing the fat MP thingy...)

The fat MP thingy is under a $1......

But, a Nonavong would be classy, nothing’s too good for one’s Mom!

Winegums · Nov 10, 2017

This thread always needs more cap porn.

Today's setup

hinglemccringleberry · Nov 10, 2017

shredder said:
For all things dynavap, I listen to @Squiby. She vapes small bud pieces without grinding, she starts by heating the bottom of the cap, then moves up to the middle for the second heat up, and the top of the cap for the third. Its the only way I've vaped buds in my dv's

Isnt it the other way around? First heating at the top of the cap to max out on flavour, then work your way down and finish off the load by heating at the bottom for full extraction?

Carl Hempel said:

I got couchlock just looking at that.

Winegums · Nov 10, 2017

mccringleberry said:
Isnt it the other way around? First heating at the top of the cap to max out on flavour, then work your way down and finish off the load by heating at the bottom for full extraction?

I get the best flavour when I heat at the bottom then switch to high up on the top of the cap. There's a big flavour hit up front that gets everything up to temp, then a less tasty second hit that doesn't need as much heat.

Whissmu · Nov 11, 2017

sunset moment in good company ! :leaf:

DirtyD · Nov 11, 2017

Have you seen junior's grades? :hmm:

mucsusn · Nov 11, 2017

mccringleberry said:
Isnt it the other way around? First heating at the top of the cap to max out on flavour, then work your way down and finish off the load by heating at the bottom for full extraction?

I got couchlock just looking at that.

@shredder got it right

stark1 · Nov 11, 2017

You all have me up-side-down. Please define your tops :leaf:

,
from your from your :rant:

bot-toms

(Without any consistency, I heat mine according to the spirit of the moment. On occasion,
I, too, tip it too far. Ya-a@ck!)

Happy Veterans’ Day, everyone!
Chilli’s, or Appleebee’s. Chili’s. Or :love:

Applebee’s!

Dynavaper · Nov 11, 2017

Which one is the TI tip?

vapeymcphee · Nov 11, 2017

yes there is a video online showing somebody doing this but it is for another model - having trouble with O ring placement - please advise cap callers - surprised there aren't more instructions on line.....

stark1 · Nov 11, 2017

To me, the curvaceous one of course is

Dynavap VapCap

I dab. A lot.

Putin is a War Criminal

Well-Known Member

Putin is a War Criminal

happy camper....

Well-Known Member

Putin is a War Criminal

Well-Known Member

Lonesome Planet

Putin is a War Criminal

I dab. A lot.

Well-Known Member

Well-Known Member

Well-Known Member

Lonesome Planet

I make things from wood

Well-Known Member

I make things from wood

Well-Known Member

Well-Known Member

60 going on 20

Lonesome Planet

Karma Farmer

Well-Known Member

Lonesome Planet